Infinitely long can be given in a good company in the kitchen for delicious dinner and pleasant conversations. And in order for the atmosphere to be suitable, you should choose the perfect facade of your own kitchen. Moreover, a good headset is almost 100% the guarantor of perfect dishes prepared on it. Therefore, to pick up the decoration of cabinets with a special trepidation, paying attention to every little thing, because the design and size of the finished kitchen are obliged to bring joy to the owners.
Factory headsets are most often manufactured by common standards. . Typical dimensions were determined by the results of the operation of a considerable amount of kitchens of various dimensions.
Standard facades for kitchens are really suitable for most women, because it is pretty aesthetic and meet all ergonomic requirements.
Standard Type Facade Size
Given the fact that the kitchens of most apartments have an area of approximately 9 m², mostly all factories operating in the furniture sphere give preference to facades having standard dimensions.
Top cabinets:
- Height - from 50 to 90 cm;
- Depth - 30 cm;
- Width - from 40 to 80 cm.
Lower cabinets:
- Countertop:
- Depth - 60 cm;
- Thickness - from 3 to 5 cm.
- cupboard:
- width - from 240 to 80 cm;
- Height - 85 cm;
- Depth - from 40 to 80 cm;
- Door scope - from 40 to 50 cm.
The remaining gaps between the cabinets indicate the size of the distance between the doors. The manufacturer itself sets the selected range, although in the technological standards there are no all possible cracks.
So, for a box having two doors, the gap ranges from 3 to 4 mm. This information suggests that From the generally accepted standards, the magnitude of the gap should be subtracted.
The top lockers arranged over each other suggest a gap equal to 4 mm. Hence, The facade height of each tier will be equal to the height of the cabinet with a deduction of 2 mm. In addition, it is necessary to take into account the space between the lower edge of the facade and the floor, equal to 10 cm.
When planning the installation of the cornice, it is necessary to remember the height of the upper door, which coincides with the height of the entire body, with a deduction of a 6 mm gap, located under the cornice. Based on all the above, there is a chance to personally calculate the dimensions of the facades for the kitchen. However, it is worth remembering about the nuances peculiar to modules. No need to forget that for any headset, personal calculation should be made, which will eliminate the probability of error.
It's important to know! Each manufacturer creates its grid of standard sizes for headlights. Most positions coincide, as they are calculated on generally accepted standards and take into account approximately the same technique for the kitchen.
The most popular facade dimensions for kitchens can be seen in the table.
Doors, swinging | Boxes, extending | ||
Width, mm. | Height, mm. | Width, mm. | Height, mm. |
396. | 496. | 140. | 296. |
396. | 596. | 140. | 396. |
570. | 296. | 140. | 446. |
570. | 396. | 140. | 496. |
570. | 446. | 140. | 596. |
570. | 496. | 283. | 296. |
570. | 596. | 283. | 396. |
713. | 296. | 283. | 446. |
713. | 396. | 283. | 496. |
713. | 446. | 283. | 596. |
713. | 496. | ||
713. | 596. | ||
900. | 296. | ||
900. | 396. | ||
900. | 446. | ||
900. | 496. |
Radius facade compositions are very popular over the past few years, which are an excellent design decoration of interiors and a spacious ergonomic element. For them, there are separate parameters:
- Height - 1316, 956, 716, 573, 536 mm;
- The exact width coincides with the standard dimensions specified in the table.
Measure the parameters
The modern furniture market offers not only to acquire typical facades, but also to order non-standard headsets that have arbitrary dimensions of the modules. It is worth considering that the price of models made under the order will be greater than 20-30%.
The cost increases due to the fact that to create one such part it will require complete reconfiguration of the equipment.
Usually the customer pursues certain objectives:
- obtaining a kitchen headset inscribed in a particular room;
- Acquisition of furniture at the lowest price;
- Reducing the terms of production processes.
The execution of all these tasks is possible if the initial measurement was performed correctly. By choosing a model, you need to take the table of standard dimensions to the table for modules, because various firms offer their unique dimensional grids.
Remember! The completed kitchen intensive plan with the calculation of the facades is required to match the table. Try the resulting dimensions to compose with typical.
Therefore, the overall values should be selected, and the size of the gaps, making the final price to decrease by 20%. The adjustment procedure will not completely save you from non-standard elements, but will reduce their number.
Non-standard furniture
Facades for headcards with non-standard dimensions are manufactured by extraordinary sizes. The original product is considered Furniture products bent or radius type. The first are especially used in Italian headsets or in combined. This solution increases the area of use, and also improves the appearance of products. In addition, this version of the kitchen is distinguished by a long service life. In addition, the corners in the traditional options are sharp, which is unsafe for families where there are children.
There are several nuances that need to be considered when ordering such modules:
- The curved design of the cabinets is heavier calculated;
- The price will be higher.
Corner cupboard
Independent arrangement of the kitchen space involves knowing the calculations of corner cabinets. The most common types:
- Outdoor type with full dimensions;
- Classical cabinet;
- knot suspended.
In order to correctly calculate the size of the single-sided swing product with a straight back wall equal to the housing width, with dimensions of 600x580 mm, it is necessary to use the following formula: F = √2p², where p = S-L-16 (S - 600 mm, L - 315 mm, 16 - the thickness of the chipboard).
The resulting results of the calculation will be a facade width.
We carry out the calculation of the headset for the kitchen
Facade parameters are not furniture dimensions. Planning the kitchen, do not forget to take into account the bedrooms, the thickness of the countertops and the remaining indicators that help make the drawing faithful.
remember, that The clearance in the cabinet with two doors will double . If the table provided was not found in a certain value, it is possible to forgive from 2 to 3 mm or increase the size of the gaps by another 3 mm.
Lower row
Determining the headset parameters of the cabinet, which is lower, should be taken into account the height that must be measured. There is a chance to find a compromise between the indicators, given the fact that convenience will be considered more important to meet the standards.
Suppose the height of the table top, which must be created, is obliged to be 90 cm. They will include:
- The designed gap that shares the worktop and the doors is not less than 1 mm, but not more than 3 mm;
- The height of the kitchen countertops - 26 mm, 36 mm, reach even up to 5.5-6 cm;
- The furnace gap, located near the cornice located downstairs, and sash - similar to the first parameter;
- The length of the legs varies in extensive limits - it all depends on the taste of the customer.
In cases where the magnitude of the width of the row becomes too large, in the resulting space set interesting details. Additional 16 cm can be used for mounting an item in which it is possible to easily place bottles or small packages and containers with spices.
Door and its dimensions
For faithful calculations of the door sizes, it is necessary to use the main parameters of the boxes, take away from them the magnitude of the gaps. Suppose we have a height of 72 cm and 60 cm wide. By installing gaps that do not reach 2 mm, we obtain the value of 596x716 mm.
Thus, it is possible to correctly perform the calculation of all necessary dimensions, However, it will be appropriate to be initially familiar with the assortment and rely on the parameters of the table of furniture products of a particular company offering precisely those models that you liked.
On how to measure the furniture facade correctly, look next.