Pineapple in our country is not growing, but he is well known to children, even those who have not tried it. Were seen in the pictures or on TV an unusual fruit with scales and a green ebony, difficult to forget. An interesting appearance encourages kids to creativity, they gladly make pineapple from plasticine.
Tools and materials
We will conduct master classes for different age groups. Older children easily cope with conventional plasticine, it can only be held in hot water so that it becomes softer, and you can make a smearing. From three years old, it is better to purchase a set based on beeswax, it is pulled out without effort, leaves no fat traces.
In addition to plasticine, you will need a plastic board or oilcloth, so as not to stain the table, a stack for cutting color briquettes and a napkin for hands. About the additional material that will be needed in each case, let's tell later.
Step-by-step instruction
Pineapple Czech can be made by different methods - squeeze out, cut, glue . Each of them is interesting in its own way, so we consider all the ways for your work.Method of extrusion drawing
The easiest option recommended for children is 3-6 years, is to draw the pattern on the pineapple peel.
- Take a piece of yellow plasticine, Skate the ball from it.
- Slowly pull the top of the pineapple, Forming a blank similar to a pear.
- Using stacks start squeezing the crossed lines diagonally . Older children can make a more complex drawing similar to pineapple scales.
- For the manufacture of foliage, we need green plasticine . Shot from it a ball, splash in a cake and a stack cut sharp leaves. To simplify the work of the kids, they will be represented by a single branch.
- Stick the workpiece to the top of the pineapple.
To "revive" the fruit, make him a muzzle.
- Start with eyes. To do this, take a piece of white plasticine and very little black, for pupils. From white material, roll two small balls, make some round cakes.
- Gently stick your eyes to the top of the pineapple , one side connect them with each other.
- Designate Pupils Black plasticine, placing them in the upper part of the eyes.
- Make two more white pellets, no more than previous sizes. . Stick on both sides to the fruit, to the place where cheeks should be.
- Make nose Pineapple. To do this, roll the tiny pea from the green material and secure it under the eyes.
- Under the nose between the cheeks stack Draw mouth.
It turned out a very cute pineapple, similar to a cartoon character.
Method cutting pattern on the peel
For cutting scales, we need ordinary scissors. The task will cope with older children, from 5-6 years old, which can already work with scissors, because cut plasticine, even soft, more complicated paper.
- Prepare two plasticine bars: For green leaves, for the fetus - at its discretion (brown, red, yellow or orange).
- Roll two balls of different shades: Green is smaller, brown is larger.
- Work first with brown material, scroll it in the palms to get a slightly oblong shape, similar to the barrel . Green ball turn into a cone-shaped blank.
- On the brown surface, start cutting on the scissors of the scales in the form of triangular notes . Work is performed from bottom to top. During the cutting of the series you need to shift.
When all the fruit is filled, proceed to work with the leaves. We will not make them separately, but form a whole beam from a green cone:
- Take the scissors and with a wide hand of the workpiece, take suns leaving the corner of the cone;
- Then carefully deploy the sliced elements out and form leaves from them;
- Green blizzard connect with a tip of pineapple.
It turned out realistic fruit, not at all similar to the previous cartoon character.
Option with volumetric scales
Perform this job better with children from 6 years and older. The manufacture of each scales will require a child of perpetuity and painstaking labor. The modeling helps to form quality data that can be useful in the future.
Take two plasticine bars - yellow and green. From yellow material, roll the ball and, stretching slightly upper part, give him the shape of a pear.
The body of pineapple will form with the help of small yellow diamonds (scales). Clean them individually, jesting pieces from the general bar. Details should work out a lot. To speed up the process, you can roll out the plasticine with a thick harness, to chop it and cut the rhombus.
Bottom up glit to the surface of pineapple harvested diamonds. If they are accurately accomplished, smooth rows will be viewed, driving up.
From green plasticine, pinch small pieces, roll them into the balls and, stretching, form long-shaped leaves. When products are ready, they can be loosened with a bundle, connecting at the bottom, then placed on the top of the pineapple. Another way is to glue each piece separately.
Useful advice
Plasticine modeling is a fascinating and useful occupation. We hope our advice will help those who have just started to master this creativity:
- To save the surface of the table clean, use to work with plasticine board or loaf;
- softening plasticine long kneading in the hands, and to speed up the process, It is enough to lower the bar for several minutes in warm water;
- In order to save plasticine while laying a large figure, The product is placed inside the product, For example, from a plastic bottle or cardboard;
- Ready work is possible Decorate with natural material, ribbons, beads;
- longer keep appliques from plasticine will help colorless varnish which you need to cover the manufactured card or panel;
At the end of the work, the hand is difficult to wash with water, so they should be pre-witching the napkin.
.
About how to blind pineapple from plasticine, look in the video.