Creating simple plasticine crafts helps the child to develop a small motorcy and fantasy. In search of inspiration for creativity, you can pay attention to characters from popular fairy tales or cartoons. One of these is the tricky fox.
Tools and materials
Before starting the modeling, you need to prepare all the necessary tools and materials. Start preparation costs from the selection of plasticine. For children's creativity, certain options are suitable.
- Traditional color plasticine. This is a time-tested option that you need to warm up well before work so that the weight becomes soft and militant. Such plasticine can be fluorescent or even pearl.
- Soft. Such plasticine really like the kids, because it does not need to warm and knead him in the hands. But figures from it are not so durable and resistant.
- Floating. The main advantage of such a material is that the figures from such plasticine do not sink in water. They are easy and beautiful.
To create toys, pieces of orange, brown, white, black and red plasticine will be needed. Will be needed for modeling and other tools.
- Wooden plank. It is needed in order not to pack the working surface of the plasticine. Replace it with ordinary sheets of paper.
- Stack. We are interested in working with small elements of the figure. Stack, as a rule, comes with a plasticine. Therefore, it is not necessary to buy it separately.
- Matches. They are used as additional fasteners. They help more reliably fix the finished figure. Instead, you can also use small toothpicks.
In addition to basic materials, you can also use additional. For example, cones, acorns or nut shell. So that the figure opens from the first time, you need to use the finished image of the character you like as a source of inspiration.
How to make bumps?
Beautiful fox from plasticine will look really fabulously, if it is for its creation to use natural materials, such as cones. The process of creating a figurine consists of several stages.
- The first thing to masse the plasticine foxes facet. It must be neat and slightly stretched in length. From the same material scream and sharp ears.
- A small piece of black plasticine roll into a small ball and fasten it on the tip of the face.
- Fox's head carefully fasten on a chish. We glue the ears on top.
- From a small piece of red plasticine, they sculpt a small tongue and attach it to the bottom of the face. Using the stack, gently draw all the necessary elements on the muzzle.
- After that, I am sculpting for fox eyes. For the base, white plasticine is used, for pupils - green. We decorate them with small cilia.
- When the face is ready, you can proceed to the pushing of the tail and limbs. Let them from bright orange plasticine. In order to make paws, 2 pieces of plasticine roll in a short sausage. In the lower front of the paws we make small decorative cuts.
- Both paws are fed to the side of the bump. The same repeat with another pair of paws.
- Next, you can proceed to the collection of the entire figure. Using pieces of orange plasticine, attaching the fox's head to the big chish, and then the tail. It is also made from the cone, but already longer.
Ready fox need to be fixed on a horizontal surface, decorated with yellow leaves or flowers. It turns out a beautiful and original handicraft.
How to make a figurine from cones?
So that the child easily coped with the creation of crafts from plasticine, it is worth making it from simple and familiar figures. The process consists of several stages.
- First make blanks for future toys. Of Orange Plasticine, they scratch three large cones.
- The largest of them is fixed on the surface of the working board. The head of the fox, as well as the tail with a slightly pointed end, is carefully attached to the resulting torso.
- The legs are also made from cones, but already smaller. When the details are ready, they are neatly attached to the bottom of the body and to its top.
- The tiny cones for the ears and nose must be well rolled in their hands. The material must be soft and supple. The ears will get slightly pointed, and the nose, on the contrary, round.
- The last stage of work is the placement of the eye on the muzzle.
Using this simple master class, you can make a beautiful fox literally in a few minutes.
The resulting figurine can be further decorated. For example, fasten flowers in the legs of fox flowers, a piece of cheese or mushroom.
You can make them from color plasticine residue.
Other options
Original plasticine crafts for children can be done using and other technician materials.
With acorns
To create such figures, you can use acory or ordinary walnuts. It will take a novice master and several colors of plasticine. The phased process of its creation looks very simple.
- Fox's head make a little walnut. You can decorate it prepared in advance color details. From the plasticine, they are damping the eyes consisting of a white base and green-blue pupils.
- Orange piece of plasticine divide into two small parts and exhaust the ears elongated from them. Small black "brushes" are attached to them. From the remnants of black plasticine it is necessary to make a neat nose for fox. All these details are attached to the muzzle in the right places. At the bottom, a small red tongue is fixed.
- Using a small piece of orange plasticine, fox's head we attach to the body.
- Next, sculpt from thin long "sausages" fox paws. Fingers can be highlighted with a stack for cutting plasticine.
- The limbs are attached to the upper part of the body.
- After that, you can proceed to the modeling of the second pair of paws. They should be more massive and wide. In this case, the figure will not fall. Such paws are made of two ovals and two flat circles interconnected. So that the paws looked more naturally, the fingers on them also need to highlight the stack.
- The final stage is the creation of a neat tail. It is made from a flat and long piece of plasticine. The tail is attached, like the paws, to the bottom of the craft.
When everything is ready, it remains only to decorate the basis for the figure.
It can be decorated with moss, small bumps, leaves or clusters of rowan.
Cartoon Lisa
This fox looks like a character from the Mimshka cartoon. Since the figure consists of a large number of small parts, during its modeling a child may need help someone from adults. Before you begin the creation of figures, you need to get acquainted with a simple step-by-step instruction.
- The process of modeling figures from the head of this character begins. From orange plasticine, roll the ball and give it the shape of the droplet. The nose in the fox should not be too sharp. Of the small pieces of plasticine, we make small triangular ears and attach them to the head. The central part of the muzzle must be slightly pressed and cut on it small depressions for the eyes. There put little pieces of white plasticine. Top of fixing black pupils.
- Fox's eyes can be decorated with small slim cilia from black plasticine. They should be used to "draw an animal brow. They should be short and neat. On the spot of the nose we fix the black oval. Such a muzzle is a small smile made of light and thin stripes.
- After that, you can move to the torso lug. It is made of white plasticine. The head is attached to it using match or toothpicks. Downstairs is attached a small detail of light green color. The outfit for chanterelle is turned out simple, but cute. From the remains of orange plasticine, two pairs of paws and a small tail. For their decoration, details of white and brown flowers are used. Of them make the tip of the tail and "socks".
- Decorate clothes of this cartoon character can be simple cherry Made from two green stripes and small red circles. Details are very small. Therefore, it is best to attach them to the best stack or toothpick.
So that the chanterelle looked more attractive, it should be covered with a layer of transparent varnish. In addition, it will allow to prolong the service life of the toy.
From cones with cylinder
Even the smallest could create such a pretty craft. Step-by-step fox manufacturing instructions are also very simple.
- For the modeling of figures, we prepare plasticine orange, white and brown colors. First of all, you need to make a fox torso. Large piece of plasticine roll over a long cone. It should be not too wide.
- Small pieces of plasticine roll in neat sausages. They must be attached to the deployed cone. Fox front paws are neat and not too long.
- Two small orange balls must be rolled and slightly add. They are attached to the back of the fox.
- They are joined short rear paws.
- A separate piece of plasticine roll over in a long sausage. The edge of the tail should be slightly pointed. The tail can be directed up or wrap around the bottle of chanterelle.
- A small piece of white plasticine roll over a thin layer and attach to the chest of fox. This part of the fur can be additionally decorated using a stack or toothpick.
- Orange plasticine remains to roll out. From this cone will be head with a long sharp face.
- Separately sculpt neat ears. They are also fixed on the back of the head.
- Lightly "revive" this fabulous character can be using small pieces of brown plasticine. Of these, there will be beautiful spout and small eyes.
The product is made of simple and small parts is cute and pretty.
Sleeping Lisenok.
Another interesting idea for crafts is a cute sleeping fox.
It is made of three pieces of plasticine: orange, black and white.
The process of creating a figurine consists of several stages.
- First you need to make the basis for the future craft. We knew a piece of orange plasticine and wech a torso and head out of it.
- A small ball must be slightly stretching and dropped on the sides. So the fox will appear cheeks and nose. The trail is also slightly pulling out. The figure should be dropped.
- Next, you can move to the beam modeling. To do this, roll two orange balls and two white. Of these, you need to make small stained figures. White details should be slightly smaller in size. Details of two colors carefully combine each other. After that, the ears gently fasten on the fox head. From white plasticine, a small flat triangle is replenished, which will be fixed in the bottom of the face. Decorate his black nose and dark eyes.
- Next, you can move to the creation of the paws. For this, of two orange balls form small sausages. White "socks" are attached to them on the edges. The rear legs do not need to work up to the smallest things. It is enough to roll plasticine into large balls and attach them to the back of the body. The last step is the fastening to the body of the tail. It is done just like Fox's paws. Only the tip must turn out to be more elongated and sharp. The edge of the tail can also be made white. When everything is ready, it must be attached to the body.
Finished fox looks like a real cartoon character.
On cardboard
A flat figure attached to a piece of cardboard will look beautiful. Such an exercise is suitable even for beginners.
- First you need to prepare plasticine of several colors. From blue material make background. The bottom is worth decorating with green plasticine grass. After that, you can start creating fox figures.
- From orange and yellow plasticine we cut the face. It should be slightly elongated. Decorate her ears with brown cut, nose and large eyes from white and blue plasticine. Supplement the face stands, drawing a small mustache on it.
- When the muzzle is ready, you can start creating the body and tail. To do this, use the remains of orange and yellow plasticine. Fox torso should be slightly curved in the middle, the tail is slightly twisted. Its edge can be decorated with white. Made of small elongated tail parts seems to be volumetric and fluffy.
- When the muzzle and the torso will be ready , made of brown plasticies do neat paws. The fingers on them need to "draw" a sharp stack.
Redhead beauty is graceful and charming.
Creating plasticine crafts with your own hands is a process that accurately hobble in a child of any age. You can use for inspiration any of the described figures.
How to make fox from cones and plasticine, see the next video.