Plasticine is a material from which you can do a variety of figures. They can be both very complex and extremely simple. In today's article, we find out how you can make a funny snails from plasticine.
Classic option?
Snail modeling is an interesting occupation, but not too complicated. To disassemmise to make such a funny character from plasticine, maybe a child of any age category.
For kids aged 3-4 years, it is best to master the technique of modeling with classic schemes.
Consider in detail what components will be needed for the simplest plasticine snail.
The shellfish and the mollusk body should have excellent color from each other. Bright contrasts are especially attractive and expressively, but you can resort to a small difference in shades.
To make a simple snail according to the classic scheme, you need will prepare the following materials and devices:
- Plasticine mass of black, white and two other any colors;
- wire base;
- Glasses filled with cold and warm water.
We learn a detailed instruction managing a simple snail for beginners.
- First you need to take 2 plastic material of various colors . Of these, it is necessary to accurately roll a couple of balls. After that, each of them is immersed in a glass with warm water literally for 1 minute. It is necessary that they soften. One of the balls should be slightly larger than the other.
- The volumetric ball is riveted into the harness of sufficient length. It is possible to make in your hands on weight, and you can roll out the detail of the palm on the plank.
- After that, the harness must be carefully collapsed by a spiral method. Thus, the armor of the future plasticine snail will be made.
- The ball that has more modest sizes must be rolled into a thick and short sausage. Then this element is neatly bent at right angles.
- The basis of the body of a future plasticine snail must be pressed with fingers to the board . It is necessary that the item becomes flattened, the uneven edges acquired.
- On the flat plasticine piece, you should gently set the finished shell. This element must be slightly pressed. It is important not to overdo in this process.
- From a white plasticine paler take a couple of pieces, and then rolling them into the balls. Their sizes should be close to beads. After that, a piece of black plasticine is rolled for a plate. This element needs to wrap the wire item, which will then be inserted into the harvested white beads, as well as a snail torso.
- From the plasticine mass of black, you should also prepare a couple of small balls. They need to be slightly strung, and then fasten on white beads. It will be pupils of mollusk.
When all components are collected in a single composition, it will be possible to appreciate the fun charm of the plasticine snail.
How to sculpt with chestnut?
An interesting handicraft will result in a combination of plasticine and chestnut. Using such materials, you can make a very original snail. For this, you will need the following components:
- chestnut;
- wet wipes for hands;
- Plastic stack;
- Black and bright pink plastic material.
Consider a detailed master class on making a cute snail from plastic mass with chestnut.
- First you need to take a piece of bright pink plasticine. It will take it to divide into 3 parts.
- From the workpiece having the largest dimensions, you should form a base for a snail torso . Ahead will be the mollusk head. Next, you will need to prepare the necessary reservoir under chestnut.
- Chestnut must be attached to the central part of the plasticine craft. From the billet, which has the smallest dimensions, should make the horns. In the upper part of them, it is necessary to fix the eyes of a snail. Additionally, it will be necessary to attach tiny balls from plasticine black. It will be pupils.
- The marked and collected eyes should be fixed on a plasticine mollusk. Next you need to take the stack. With it, it is necessary to carefully draw nostrils and mouth in the form of the simplest lines.
- From the middle bright pink ball need Roll the long and thin strip.
- The side of the chestnut will need Plug a thin billet from bright pink plasticine mass . Thus, the helix should be formed.
- If all actions were correct, resulting in Very attractive and positive handicraft, which will definitely please the child.
How to do with a shell?
This master class is especially attractive for children aged 3-4 years.
For self-making a charming snail with a shell, you will need a little walk in the park or inspect the country area. It is in such places that there are most often empty shells.
In addition, other, equally important components will be needed:
- long shells;
- Plasticine mass of different colors;
- Plastic stack.
If all the components were found and prepared, you can start making a cute plasticine snail.
- First prepare the shell. Shells must be very good and thoroughly rinse and remove all dust and contamination from them. Preparations will need to dry. If you want, the sinks are allowed to be treated with varnish.
- Color plasticine bar must be well mounted in hands, And then form a dense sausage from it. One of her ends must be done a little already, and the second is to bend. Along with plasticine sausages, pre-harvested and clean saccus are placed.
- The shells of the oblong type must be rinsed as it should be cleaned from all pollution and mucus . Prepared components stick into the head of the mollusk. All butt sections are carefully smoothed.
- Next take plastic material white . It makes a couple of balls, the sizes of which resemble beads. In the inside of these components form recesses by means of stacks.
- It is necessary to make balls from green plasticine . Then these details are slightly flattened and placed in the eye iris area. Pupils are also made in the same way. Mollusk's prepared eyes are fixed on top of long shells.
- A short harness is rolled out of the colored plasticine mass. It is fixed as a cute smile snail.
Such an exercise will be very original and spectacular. She must be interested in the child.
Lusher on cardboard
Plasticine snail on the cardboard - a very beautiful composition. To create it, it is necessary to prepare only wire, marker, plastic stack and plasticine.
Consider detailed instructions for creating such a craft.
- First, the purple plasticine bar should be taken. It is pretty kneaded, after which they form a long sausage.
- The finished sausage is neatly folded over the helix . All surplus should be cut through the stacks.
- A piece of pink plasticine mass will also need to roll into the sausage. This component must be slightly thorough and shorter.
- To the rear half of the workpiece you need to attach the shell made in advance. Frontal half is sweeping at right angles.
- Using the marker, it follows Arise the eyes of plasticine mollusk.
- Next, the wire item will need to be cut to work out 2 short cuts . On one of the tips of each of the segments, the ball, was shaken from the colored plasticine mass.
- Next, the ball will need to gently pull to the bottom. The second tip of the wire is stood into the head. So it turns out to make a mustache.
- At the final stage form the simplest flowers and leaves, which are surrounded by plasticine snail.
The consistent homemade turns out to be very simple performed.
Of course, at the end of all stages, the finished snail can be supplemented not only by plasticine flowers and leaves, but also by any other scenery. Here, the fantasy of the young master is not limited to anything.
Other ideas
There is still a lot of diverse technician modeling snail from plasticine. In different master classes, different materials are used. For example, black and positive are crafts with maple leaves, bumps, pasta, acorns, and so on.
Consider gradually how you can make it yourself of cute snails from plasticine and macaroni.
- Necessary Take a few macaronin , the shape of which resembles the form of shells.
- Follow take a pink segment of plasticine, Roll out from it the sausage and adjust it at right angles. To the tops should be attached to the snail eye. They can be made of plasticine, but you can use ready-made options purchased in the store.
- Costs Make a mustache With the help of a pair of toothpicks and pink plasticine circles recorded on them.
- On top of Makaronin cost Attach small flattening plasticine mugs . With such components, the handicraft will turn out more interesting.
- Taurus snails can be combined with sink-macaronic. In a single combination, the finished homemade will look cool!
A child will cope with a similar craft, which is 4 or 5 years old.
Maximum simply can be made snail from plasticine and cones . The principle of actions here will be approximately the same as in the case of empty shells, only in this case the role of the shell will take, for example, a fir bump of suitable sizes.
Such crafts look especially interesting and unusual. They will be able to discernly make even the smallest masters.
Very original and elegant will be a plasticine snail, in the manufacture of which the maple leaves are used. To create such a craft, you will need:
- red plasticine;
- stack;
- maple leaves;
- scissors;
- Double-sided tape;
- Plastic eyes.
We will analyze the step-by-step work.
- Red plasticine mass is taken. A small sausage is formed from it.
- One end of sausages should be more dense. Here you will need to do an incision to formed 2 halves. Of these, it is worth making a mollusk mustache. The body will need to bend.
- Now you need to prepare a "house" snail. For these purposes, it is necessary to use maple leaves. In advance, they will need to cut off all the cuttings.
- The maple leaf is neatly folded. As a result, it turns out a strip. It will need to twist it. It should be started with a narrower side of the part. So that the snail house turned out to be more voluminous, it will be necessary to wind another number of similar strips from the leaves. At the final stage, the mollusk sink must be fixed by scotch. Thanks to him, the detail will not spin.
- Next, the finished house from the leaves is attached to the body of a plasticine snail . Then add plastic eyes. Through stacks indicate the mouth. Crafts ready.
Detailed instructions for the manufacture of plasticine snail can be found in the following video.