With a dog, many associate loyalty and devotion, strong friendship. This pet is almost immediately becoming a pet, so he pays a lot of attention. An interesting occupation can be called the modeling of a dog from plasticine. Similarly, beautiful figures are created, which can be an excellent decor of the room.
Tools and materials
Plasticine can be called the most common material for modeling. To date, the sale is just a huge number of different sets that can be used to carry out such work. For modeling, you will need certain tools and materials.
- Flat surface for modeling. It is needed in order to keep the workplace clean. If the work is carried out infrequently, you can use the oilcloth. In various stores there are planks made of wood with a smooth side. The use of boards significantly simplifies the task, as the solid surface allows you to make smooth and symmetrical figures. Make a board for the modeling can also be made of girlfriend.
- Knife. Get smooth cuts can only be using a special tool. The knife used should be relatively small, as well as the blade is not very sharp - this is especially important if children are sculpt. It is best for such a task a stationery.
- Stacks. Such a tool is used to obtain a recess of a certain size or form. If you are lying professionally and for a long time, the set of stacks can consist of 20 or more items. For a single work for the first time, 1-2 options are already enough, as well as instead of a special tool can be used to use coins or balls, buttons and other small items.
- Scissors will need when the figure needs to be prevailing an unusual form. It is best to purchase a compact option with rounded edges.
- Small rag to remove stains. The material can be strongly entered into various surfaces, so immediately after the work is completed immediately after the workplace and all tools should be cleaned carefully. For tools fit rigid fabric, for hands - soft.
- Water tank. In some cases, it is necessary to cool plasticine to obtain products of an unusual form, which is heated with long use. For this, it is laid for several minutes in a prepared bucket with liquid.
- Various molds that are suitable for cutting figures. They are sold in many children's stores, if desired, manufactured from aluminum banks.
- Molda is often used in the case when similar embossed elements are needed.
- A large medical syringe without a needle for the formation of small flagella. For this purpose, an old garlic may go.
- Stamps and textured sheets are used as a template for writing. For a similar purpose, you can also use a rigid fabric with a pronounced texture.
It is not necessary to immediately prepare the whole set, many tools are added only as they need them.
How to make Dalmatian?
You can make a dog from plasticine with your own hands, for this you do not need to possess special skills or skills. You will need two lump of black and white. All the cutting can be divided into several stages.
- From white plasticine, they sculpt the body, on one side there will be a neck.
- Plasticine is prepared for creating paws. In order for the paws to be resistant, matches are used as the base - they are clotted with white plasticine in such a way that the pieces of wood are not visible. Mixed to the body, and the tail is attached behind.
- The neck is added to the neck, which should be small and slightly pointed. Small ears are made.
- The finishing stage is to apply small spots of black over the entire surface, after which eyes and spout are made.
Who else can be sculpted?
Plasticine is considered a universal material that can be used to create various figures. For children, the modeling becomes a way of self-realization, tool for the development of imagination. Making figures can be in stages. There are quite a lot of different instructions that allow you to get the best option.
You can diversify the work and make a composition from the acorns or cones. Make a head and other parts of the dog's body can be from chestnuts. If all the steps to perform step by step and do not strive to finish as soon as possible, everything turns out beautifully and neatly.
Family of dogs - Mom, Dad and a few puppies will perfectly look at the shelf in the child in the room and even at the exhibition. Many prefer small rocks, as they are easy to create. There are black and white breeds, but for a variety you can make a pink, blue or green dog.
The most difficult thing to make a face. It may be the most different shape. Decorative elements are often used for the design of the nose and eye: beads, beads, buttons.
Easy to do and sitting dog. For a similar case, a slightly different instruction is used, as the paws must be slightly bent.
Chihuahua
Little hand dogs have become very popular. The child probably saw such a dog and more than once. For clarity, you can put a picture in front of you.
- Two pieces of plasticine are required: brown and beige color.
- To begin with a small head, using a blank in the form of a brown ball.
- Then they are engaged in a muzzle dog. To do this, the ball is slightly pulled out, add eyes and spout.
- Special attention is paid to the ears that make a little pointed.
- Next, make a body torso compact size.
- From small tubes make legs.
- After that, all elements are connected. Decorative parts make plasticine light shade.
Rottweiler
Rottweilers are considered reliable watchdogs who can be entrusted to the protection of the site. The figure of this beautiful breed can be made with your own hands in several stages.
- Two balls roll out of two pieces: one - more, the second is smaller.
- A large piece is suitable for body creation. It makes a little elongated shape, on the one hand - slightly narrowed, wide part is raised.
- The smaller ball is made from the ball. They are attached to the eyes and spout.
- A bright spot is glued on the chest.
- Paws are made using matches that plains are inserted.
- The head is attached to the body, also with the help of a match.
- Rottweiler figurine is ready.
Bologun
This breed due to its specificity is complex in creating. It should be borne in mind that it will be similar only when creating a relief resembling wool. To work, a large piece of white plasticine and a small piece of black are required.
The manufacturer's instructions will be a little more difficult.
- We divide a piece of plasticine into several parts that will be used to create a body, head and paw.
- We make a big ball, after which we glue a small tubercle, acting as a nose.
- From the largest piece we make a blank under the body. It should be a bit flat and rounded in the upper part.
- On the one hand, the tail is attached.
- With the help of toothpicks make small grooves.
- Attach the head.
With black plasticine, they make eyes and nose.
Senbernar
For this breed, four different shades are often used. White color is used as the basis, it will take some more brown, black and orange.
The first thing is made by the body. It is made by massive, the fingers are flattened at the end for the narrowing. Inside the created paws should be matches, due to which the best mount is ensured. Separate parts of white color are connected to each other.
Contrast colors are suitable for creating a kind of spots on the back. The muzzle is also painted out of the main color, while made stretched with hanging cheeks.
Spaniel
To make a figurine of this breed from plasticine light brown. The main part represented by the body is slightly narrowed to the rear. At the time of formation of the workpiece is indicated by the place for fastening the head. Paws are short and thick.
A sausage creates with a blunt end. Special attention is paid to the ears, as they hang very strongly. After connecting all the elements, grooves resembling wool are added.
Husky
Dogs of this breed look quite unusual. This is due to the fact that they have charming blue eyes. The creation process can be divided into several stages:
- roll a small ball;
- Make a facet of light plasticine;
- Small ears are attached;
- The elongated torso is done, the face placed in the front;
- attach white paws;
- Behind the tail made of two colors.
Shepherd
Over the years, shepherd has been considered the most popular breed. It serves with the military, sappers or in the police, can become a render for blind people. Many consider this breed the smartest. For the manufacture of figurines, plasticine of brown and black color will be required. Recommendations for modeling:
- Two balls are prepared - for the head and body;
- From black plasticine make a slightly elongated face, after which the eyes and triangular ears are attached;
- The elongated form will be required to create the main part of the body;
- Four paws make massive and long enough;
- Paws are attached to the body, as well as head;
The last step can be called the addition of the tail.
Boxer
This fighter breed is very common. Step-by-step recommendations for creating such figures will help in work.
- The main part is peeled from plasticine brown. Rear the form is drawn up, and the front expands, matches are inserted to attach all items.
- Paws should not be wide, and slender and powerful. In order for the figure to keep, matches are also used.
- The tail is made in the form of a small protruding tubercle.
- Plasticine white is used to highlight the jaw.
- Black plasticine is used to designate eyes and nose.
Poodle
Create figures of this breed is quite difficult, as it has a bizarre hairstyle. Poodle can act in the circus, participate in competitions at exhibitions. You can create your own unique feature in several stages.
- For this breed, plasticine is one color.
- A soft ball is created.
- From it make an elongated part, which will then be a torso.
- From a small ball the head is made.
- Of the four small pieces of plasticine, the paws are smeared inside which matches are placed for stability.
- The head is drawn up, make ears, nose and eyes.
- A small ball is placed on the top. Also, small balls are added to the lower parts of the legs.
- Attach a thin long tail with a ball at the end.
It looks like this figure is very attractive and interesting.
Pitbul
This dog also belongs to the group of Fights. It is characterized by a powerful body. To create figures you need two colors: black and brown.
To begin with the body, which has an elongated shape. The main thing is to make a finger divorce to create the effect of protruding muscles. Paws are best attached to matches, they are quite large and massive. The next step is to form the head with a pronounced jaw.
Pug
Pugs are small dogs that can also become part of the collection of plasticine figures. It is done as follows:
- To create a body, a billet of oval shape is used;
- The paws are very small, but powerful, so do not need matches for their mounting;
- Prepared parts are collected together;
- A head of coffee makes a head;
In order to highlight the peculiarities of the breed, the cheeks make a little hanging, and on the muzzle draw a kind of stripes.
Dog.
It makes a figurine of this breed of black plasticine dog. To begin with two blanks, which will be used for frills and bodies.
The body is created from a larger piece, head from smaller. She is given slightly elongated shape. It is important to make the nose more massive.
The finishing stage lies in the formation of legs and long tail. After that, you can attach eyes.
Taxa
This breed is different from many other fact that the dog has a more elongated torso and short legs. This will need to be displayed when creating figures. To work it takes black or brown plasticine. The instruction is represented by a combination of several steps:
- first pusy a long bodice tank;
- From a small ball make a slightly elongated muzzle, hanging ears add to it;
- Nose and eyes are fixed on the face;
- Next make small legs;
- attach them to the body;
- Add a small tail.
Corgi.
The figures of this breed of the dog make the easiest. First you need to prepare plasticine orange and beige color.
First, the body is made, which will be presented by a blank resembling carrot. The next stage is to create a tail.
Breast is made of white plasticine. The head shall with the ball, after which the ears are attached. For nose and eye, a small amount of black plasticine will be required.
Spitz
This feature is also easy to manufacture. The work will require plasticine of one tone. Consider all the work in stages.
- Dog breasts are created from a small ball.
- The back of the workpiece makes a little less chest.
- A small ball is rolled for the head, the diameter of which should be less than breast size.
- A long elongated face is formed from the workpiece.
- The head and body are connected, everything is polished with fingers.
- Fresh legs are formed from four small blanks.
- After that, all elements are connected, the plasticine is smoothed, the ears are attached on the head.
It is very important when making figures to emphasize the features of each breed. To do this, during operation, you can use photos as a visual example.
About how to make a dog in stages from plasticine, see the next video.