Fabulous beings were and remain their favorite theme for children of many different ages. During creative classes, the guys often arises the desire to cut out of the unicorn plasticine. This mythical horse with a horn often has a variety of colors and patterns, so during the modeling the baby can show his fantasy, fiction and creative thinking.
Simple option
The basis of any unicorn is the body of a horse. Therefore, before proceeding with classes, it is necessary to get acquainted with the peculiarities of the anatomy of this animal. However, it is not necessary to comply with the proportions. Children are much more interesting to create cartoon characters with great on the rest of the body head - they remind them of the characters of their favorite fairy tales. That's what you need for the model of the unicorn.
- Plasticine. Try to pick up a high quality material. Mass should be plastic, pliable and not sticking to the hands.
- Stacks. If you do not have a suitable tool, then a plastic knife and even a ruler will be borne.
- Wire. It will require that the figure of the unicorn holds its shape. It is usually inserted into the neck and legs, it is possible to take toothpicks or matches alternatively.
To begin with, make a small sketch on paper. Let the kid himself draw a future unicorn, and parents will only contribute minimum adjustments. Step-by-step instructions for creating a horse from plasticine involves several stages. To begin, the plasticine bar is rolled into the cylinder and bend from both sides. Using the stack, the billet gives out the outlines of the horse's body. From the plasticine of the same shade form several more bars - it will be legs. They are fixed at the bottom of the body and the stack give the necessary shape.
Next will need a weight of white. From it form a small ball and slightly flashes. Then make layers of different shades, with each subsequent should be a little longer than the previous one. The blanks are folded to get a rainbow.
The edges of the rainbow neatly cut into a knife. The rear and front legs of the horse are attached to the body on the toothpick or match. After that, the unicorn is placed on a rainbow stand, if desired, it can be reeded with a cloud. From black and white plasticine form eyes. For hooves take a colored mass for modeling.
Rotik and nose of the nose outline in stack.
From the trimming of the rainbow stand rolling the horn. It is placed on the painter of the animal, it is best to fix it on a wire or a flip of toothpicks. After that, it will only be left to roll a few bright rich hints. Of these, the tail and mane form. At the final stage of the work, you need to cut the ears and attach them to the head.
Your unicorn is ready - such an exercise can be a real decoration of the children's room.
How to make from lightweight plasticine?
A very interesting unicorn is obtained from air plasticine. Compared to the usual, it has a lot of advantages. Such a lot is very soft and gentle, puffy when modeling. It does not have to warm and for a long time to knead before work. In addition, it will not stick to the hands and smells pleasantly. To work, you will need the mass for modeling several shades, wire and knife. Let us dwell on the process of creating a unicorn in stages.
- To begin with, a small ball rolling out of the bar. He is attached to the elongated form so that the face of the animal is.
- Of the two tortillas of the same shade form ears.
- Then they pose horn. For this, plasticine is twisted into the spiral and placed on the top of the horse.
- Using stack, make eyes.
- The remaining part of the plasticine is rolling in the form of a carrot and bend the end.
- After that, form four legs.
- All parts of the unicorn body are connected. To ensure good fixation inside, pieces of wire or wooden sticks are placed.
- From lightweight plasticine rainbow shades, many thin flavors are pushed. They are placed on the place of the tail and mane. So that they turn out to be more air, flagella twisted on the manner of spirals.
After creating a small unicorn, it needs to be left in the air. After a few hours, the handwritten will be dry, but it will retain the gentle and velvety structure. This sculpture can be safely put on the shelf for the decor or give to close people. However, do not forget to place unused plasticine in a sealed package or jar. Otherwise, he will be concluded, and it will be impossible to work with it.
Figurine with wings do it yourself
In order to make a unicorn with wings, you need to stick to a simple instruction. From a piece of plasticine, a small piece is plugged, the ball is forming from it. The front part slightly pulls out so that the Morda of the Unicorn is. Stack indicate eye cuts. From plasticine, a more dark color form a small cake and fasten it on the face of the animal. Denote your mouth and eyes, for this take white and black plasticine - it is rolled into the balls, and then flatter.
From the plasticine bar of the same color, as well as the head, make the carrots. The front part is slightly flexing. Head and torso combine each other. It is best to fix them with the help of toothpicks. From the same material bars roll, they will be used as a horse's legs.
From the mass of the contrasting color form the hoofs. After that, the legs are inserted into the body, gently smooth the edges. Many harnesses roll out of the mass of rainbow colors.
Of these, the tail and mane form. Then make a couple of triangles of any saturated color shade - it will be wings. Another contrasting kel is added to them, and the simulation of feathers. Printed to the body. Make horn and fix it on the head. Without it, Pegasus will turn out.
Impress with bumps
A rather unicorn unicorn can be obtained using plasticine and natural materials. Sculpt this statuette is not at all difficult. You will need hats from the acorns or an elongated shell and cones. We give a sequence of actions. Take a pair of cones of different sizes: smaller - for the head, more - for the body. Make all dust, remove the damp pollution napkin. From brown plasticine, roll four rollers for legs. At the same time, bars for the front legs should be slightly thinner than for the rear. From the heads of the acorns depicting hoofs. Firmly fasten the limbs on the chish, which is used as a torso. The base of the figure should be stable.
On the chiske-head lock big eyes. Picture a white base, purple or blue rainbow shell and black pupil. In the corners of the eyes, put on the pair of white otlbliskov - this is a distinctive sign of the eyes of any unicorn. From plasticine of different colors, roll long flagellas for the mane and tail.
Make an elongated neck with a brown plasticine, connect the body and head with it. From small black balls, form the nostril of the unicorn. Secure on the head multicolored strands. The mane of the animal should look beautiful and playful. The magic unicorn is ready - only add a horn will remain.
Make a unicorn of plasticine is quite simple. This lesson will probably have to do with the child and the child, and his parents. Before proceeding with the modeling, be sure to think over the whole image of the sculpture as a whole. As soon as you make the basis, you can go to the creation of decor elements.
Very spectacular on the body of a fabulous horse, patterns and decorations for the mane look. If you wish, you can put an animal on a flowering lawn.
On how to make a unicorn plasticine, see the next video.