Plasticine's modeling is developing fantasy and trains a small motility of hands. From different colors of the plasticine mass, you can make almost any feature. Today we will analyze how you can make a beautiful cracker in the form of a spider.
Tools and materials
Before proceeding directly to the manufacturer, you should prepare all the necessary devices and materials:
- Plasticine (colors are selected depending on personal preferences);
- stack;
- Plasticine boards.
In addition, other materials, including wire, chestnuts, acorns, bumps, may be needed.
Such elements will make it possible to make an external craft design more interesting. You can purchase ready-made eyes for spider. They will give a ready-made completion and funny appearance. But if desired, they can be made independently.
Simple option
First you will need to prepare a plasticine mass of two different colors. Often take orange and brown material. Then you need to roll out a small piece of one color, divide it into two parts and form two balls (one of them should be larger in size). They will continue to serve the torso and spider head. After that, the two obtained details are connected to each other, slightly flatten them. As a result, a single billet should be obtained.
The transition of balls do not need to smooth, it should be clearly visible.
Then you should roll eight paws. They must have the same dimensions and thickness. In this case, it is better to twist one long harness and cut it with a stack into separate equal parts. The resulting paws neatly attach a spider to the body and give them a natural look. Their tips should be slightly pointed, all formed irregularities smoothed with fingers.
Later, roll another big strip and two smaller. All of them are slightly sprinkled with hand and pushed on the back of the spider. The basis for the eyes is better to take white. Two small mugs roll out of such plasticine, which are attached to even smaller black dots. All this is also slightly flattened and attached to the head. With stacks, you can make a spider smile.
How else can you make?
Next, we consider other step-by-step schemes of how to make a plasticine spider.With walnut
In this case, they are preparing a shell from walnut. It is neatly blamed with various bright colors. Make it better immediately in several layers. All items will have to dry out.
At the same time, it will be necessary to take a cinene and form 8 of the same legs from this material. All of them will be attached inside the shell. You can do it with a small plasticine piece. At the same time, the legs should be beatened so that the spider will eventually stand on them.
Later out of the plasticine mass form nose and also attach it to the base. Eyes can be created in several ways.
Most often take ready-made details purchased in the store. You can also do them and with your own hands from old beads, beads.
On web
For a phased creation, such a craft should first prepare the basis. As it, you can take a piece of bark, a board or just a piece of cardboard. If you plan to hang the finished product on the wall, then on the reverse side there are pre-made a small loop. After that, plasticine is taken white. There are many fine flagellas that will be needed to create a web. The thinner they will, the better. The base strips are laid in the form of snowflakes.
Then in the formed triangles lay short elements in such a way that the web could slightly "burn". At the same time, two any other plasticine colors are taken, they roll out one ball of different sizes. They are connected to each other. It will also be needed copper wire. Eight pieces of the same sliced cut off from it. Each of them is inserted into the side pieces of a small ball. On each side there must be four such elements.
Instead of eyes, you can attach minor white beads or beads of the same color. The resulting spider is planted on a web. In this case, the main place of fastening will serve as the central part of the body. At the end, you should straighten your paws to the sides.
With chestnuts
Even children under 5 years will be able to make such a simple handicraft. For this, dried chestnut is taken. In its lower part, the cake made made of brown plasticine. Thin branches can be served as spider's paws, which are a little overwhelmed in those places where they are flex. The branches must have about the same dimensions. They are inserted into brown plasticine. Each side should be 4 paws. Next glued eyes. You can use ready-made details from the store, and you can make them with your own hands from white and black plasticine.
Sometimes the paws are made of wooden speakers. In this case, each foot will consist of two such elements. They are connected to each other at right angles. The connecting element will serve a small piece of plasticine of any color. It is pre-rolled into the ball. On a spider you can wear a hat from the acorns.
So that it can normally hold on to the cradle, it follows in her middle to lay a small piece of plasticine. In this case, it will become a connecting element.
With rhinestones
First form two smooth plasticine balls. It is best to take a black mass. One of them is flattened, it will act as a spider body. In a large ball, you need to fix a small piece of toothpick or matches. Only then the second element will be attached to it, which will be head.
Two flattened white mugs are pushed on the head, which will become eyes. They are fixed on small black plasticine points. Under the eyes join oral appendages. It is better to make them from the same material: it is rolled into a thin "sausage", bend immediately from two ends and is fixed to the base.
On the head and the torso spider should draw a simple texture. Make it better with wooden spanks. The paws can also be made of black plasticine. Eight separate slim flags form out of it. Each such part is desirable to draw volumetric texture. All the threads gently bend and attach to the body of the spider. Sometimes to create legs use simple metal wire.
Next, the torso begin to decorate various decorative elements. You can attach several small beads of gray coloring. Then the back should be pasted some more small brilliant rhines. At the same time, you can take both monophonic and multicolored parts. Sometimes one large decorative stone is fixed on the craft, and then framed it with smaller samples. Small rhinestones can be attached to the head of the spider. If you wish, you can make a separate stand for the cracker. It is also performed from plasticine.
The finished compositions are often covered with a protective transparent varnish, which will make the product more solid and give it shine.
On how to make a spider from plasticine, see the next video.