Origami for a birthday: what to make a grandmother and grandfather, girlfriend and brother? Light gifts do it yourself, crafts for sister and aunt

There is a great many interesting ideas for creating beautiful origami on the birthday of loved ones. There are both very simple and affordable and fairly complex schemes that only experienced origamists can cope with. In today's article we will find out which origami can be made with your own hands on your birthday.

Folding paper flowers

The most popular birthday gift is beautiful flowers. This may be not only live plants, but also made with their own trees-origami. With proper execution, such crafts are obtained very attractive and original. Such a gift can be pleasantly surprised by the culprit of the celebration and cause a sincere smile on his face.

In the Origami technique you can make first-class flowers for a birthday gift grandmother, a friend, sister, aunt or mother. Both beginners and experienced origamists can simulate original tulips, lilies and roses from ordinary paper.

Tulip

Beautiful and unusual paper tulips are obtained, made in accordance with the origami technique. To simulate a similar birthday present, you will need the following important components:

Color cardboard;
Special paper for scrapbooking;
Dense sheet A4 format;
Glue and scissors with sharp blades.

Using the listed components, you can make chic gift tulips. We will analyze step by step as they are correctly modeled.

At the first stage, you should take a sheet of paper, for example, yellow. It will take from it gently cut the square. It must be folded twice in the diagonal.
In the next step, the paper blank will be needed to gently adjust the corners in the direction inward and towards the fold in the center. Due to such manipulations, a neat tulip bud is formed.
Now you need to prepare a sheet of paper green. From it, too, it will be necessary to cut square. After that, it will be necessary to bend it diagonally.
The side parts of the formed triangular part must be collapsed to the central point of the workpiece.
Similar actions will need to be repeated in relation to the main workpiece.
It is necessary to bend the tips located below. It is necessary to do this in different directions. The result is ready and neat leaflets of the future gift flower from paper.
Further, the prepared paper bud is glued to the stalk.
After that, you need to take a large sheet of paper. An indentation should be made on the edges of approximately 6 cm.
From both sides it will be necessary to do neat cuts. Their depth should be at least 2.5 cm.
Cropped parts will need to bend to the middle. The result will be the right trapezium, which will play the role of a pot in the original flower.
Paper sheet must be flipped over. The top is flex. Corners of the base should be adjusted. The lower edge will need to be wrapped upwards.
Outstanding parts in the design of the workpiece will need to bend back.
The finished charming flower at the final stage should be glued to the paper pot.

the Rose

A wonderful birthday presentation will serve as a rose made in Origami technique. Such an exercise can be a supplement or decoration to the main gift. The simulation of paper rose takes place in several major stages. In addition, the following components will be needed:

dense cardboard (it can be used to make the original postcard);
Green paper sheet:
sheet of paper of any bright shade;
Glue and toothpick.

We will analyze the detailed instructions for independent origami modeling in the form of roses.

A paper square that will be used for the manufacture of bud, you will need to be cut down diagonally, and then deploy.
In the next step, the side sections of the workpiece will need to be collapsed. It should be done towards the formed bending. After that, the paper blank must be decomposed.
The short edges of the product will be needed to be adjusted towards the central part.
Upper square, which is on the right side, you need to beg diagonally.
On the right side, the paper billet should be unhappy, keeping the central corner from the bottom, pulling it off.
The formed corner will be taken carefully to get inside and towards the middle of the workpiece.
With regard to the remaining squares, it will be necessary to carry out the same manipulations.
Now it is required to move the corners from the middle to the edge of the future paper rosette.
The angles inside are fused to the sides.
External corners should be wrapped back.
Next, from the paper sheet of green, you will need to cut off the long strip. It should be very gently screwed to the toothpick.
From paper residues, you need to make items. For these purposes, you need to beat up the shortened sides. The product must be turned over. After that, the central corners of the design will be needed to beaten down.
To the formed leaves, you will need to attach a bud and a strabelle of homemade roses.

Lily

A chic gift will be a bouquet of paper lilies. If you do these flowers carefully, using good materials, you can achieve delicious results.

Consider step-by-step instructions for modeling chic paper lilies.

First, the square leaf of paper must be folded in the diagonal. It follows in two directions.
Next, the sheet is twice and along, and across.
It is necessary to form a database shape - "Double Square".
The sidewalls of the upper layer of the product must be folded towards the middle in accordance with the form of "air snakes".
Similar actions will be needed on the other side of the workpiece.
Formed triangles are folded inside by reverse fold.
The workpiece will need to deploy 180 degrees.
The sidewalls are made up to the middle.
The same actions need to produce on the back.
The workpiece is reversed by 180 degrees. The middle part needs to be bent, and then fold along the type of triangle.
With the remaining three folds, you need to repeat similar actions.
Flands formed in the center of the workpiece should be wrapped inside.
Now the future lily should be beatened in the form of a rhombus.
Side half laid to the middle of the workpiece.
These manipulations will need to be carried out with all other rhombus in the design of the workpiece.
Petals Now you need to neatly deploy and round.

You can simulate a pair of identical lilies, and then insert one to another to get a more voluminous and original flower.

How to make a postcard?

An equally original and memorable gift will be a creative postcard made by hand.

Such a present can be handed not only a woman, but also a man, for example, grandfather from granddaughter, uncle, brother, father, who liked the boy. Homemade postcards are both extremely simple and quite complicated in the manufacture.

A very good gift will be the original volumetric card-Kirigami, decorated with a festive cake. Such a craft can be given to friends, and relatives. For modeling such a product, the following components will be required:

dense paper;
Templates prepared in advance;
glue;
Stationery knife or scissors with sharp blades;
Double-sided paper (its color can be absolutely any).

We will figure it out in stages like the listed components need to be correctly masked a beautiful bulk birthday card.

Previously will need Print on a sheet of paper a variety of decorative components, With which an unusual festive handicraft will be decorated. In addition, the workpiece itself should be prepared.
Through the acute stationery knife The master will have to do the necessary cuts On ready-made lines on the scheme.
At the next stage the elements printed on paper will need to be as used as much as possible. . It is necessary to act without any hops, so as not to spoil the neat appearance of the original postcard.
Now it will be necessary to bend, and then bent Paper blank in the direction of yourself.
On top of paper Adjust prepared decorative components. They will need to be very gently and securely glued to the workpiece of the future paper card.
At the next stage, the sheet will need to bend twice. After that, it should be incurred by Kirigami.

Using this example, you can show fantasy and use the most different images and inscriptions, and not just the decor in the form of a festive cake.

Other ideas

On the listed master classes, the options for the manufacture of origami-presents for birthday do not end. There are also countless other creative crafts, of which there are amazing gifts and for women, and for men, and for children of all ages. . It may be bulk, and modular, and flat options.

The money invested in a creative and attractive envelope made in the Origami technique can be classified as a cool present. To simulate a similar product will be needed:

2 multicolored leaf;
glue either bilateral tape;
pencil;
ruler;
Scissors with sharp blades.

We will analyze the process of manufacturing such an attractive and useful gift.

At the first stage, a sheet of color paper will need to be very gently cutting the workpiece intended for one side of the future of the original envelope.
From another leaf, cut paper blank intended for the inside of the planned gift product.
The inner part of the envelope is worth making a little less than the external part. It is necessary that the product can be subsequently easily flushed.
In the next step, it is necessary to glue the inner part of the paper convert.
The edges of the paper should be very careful, and then take them.

Uncle, dad or grandfather, you can make an excellent version of the envelope greeting card in the form of a charming shirt. You can put a note with congratulations to such a gift handicraft. Simulated similar present as follows.

You need to take a rectangular paper sheet, the dimensions of which are 21.5x30 cm. It must be put on the wrong side.
The rectangle will need to be folded and along so that it is possible to place the central strip on it. After that, the product will need to deploy.
The side halves of the future gift craft must be adjusted towards the central line.
Paper blank will need to rotate 90 degrees.
At the next stage, it is necessary to gently adjust the right side of the workpiece literally by 1 cm.
The product must be put vertically, and then flip over.
Corners from the bend are folded to the line in the middle. This will be a collar of the future shirt.
At the bottom, the corner of the upper layer is revealed by about 1/3 height of the paper billet itself.
The lower part of the available paper design will need to bend downward. The edge will need to be carefully started under the formed collar. At this stage, the original origami-shirt will be fully ready!

You can additionally decorate such a gift separately formed tie glued to the shirt.

On how to make a card postcard, see the following video.