Creating bombing from paper - the pleasure is not new. Many years ago, the children were smelled, they filled it with water and dumped from the balcony. However, make this paper figure is not so easy. This is a whole technique that requires attention and training.
What it is?
In essence, the water bomb - made by the Origami equipment cube from paper. The resulting shape is filled with water and thrown from height. Bombing received its name from the incidence of the fall, when the liquid sprinkled into it is sprayed in different directions.
All you need to create this craft is a paper sheet (preferably square, but can both in A4 format).
Despite all the difficulties, anyone who carefully fulfills instructions can cope. In addition, the formation of a figure takes quite a bit of time.
Folding scheme
You can get the desired figure, if you have stepped out the action plan below.
- Prepare paper sheet. You can take A4 format and make it square, cutting off unnecessary. To do this, it is necessary to fold one corner from the opposite side, and then carefully cut down an excess strip with scissors.
- Make crushed bends. The square should be bent again diagonally - from the upper left corner to the lower right. Next, the fold must be deployed and bend the same way now from the right to the left corner. As a result, the hall in the form of a cross should appear on the surface.
- Bresh the sheet in half vertically and horizontally. Before doing this, you should turn the paper on the other side.
- Get the basic basis in the form of a triangle. To do this, beolate a sheet according to the resulting bends.
- Form from the resulting triangular figure square. This is carried out by the bending of the upper side corners along the center line. The same must be repeated on the other side.
- Put the resulting piece of paper in a convenient way. So that the diagonal line is in a vertical position (especially its lower corners). This allows you to simplify work and easily cope with further actions.
- Make pockets. To achieve this, bend the side corners towards the central line with which they must come into contact. Next, flip over the resulting figure and repeat the steps.
- Inflate shape. To make the design of the bulk, it is necessary to find the hole on one of the tips to run the air (or simply to blow). As a result, a cube should turn out. It is not always easy to do this: if the manufacturer used rigid paper, it is possible to achieve the desired one with the help of straw.
That's all. It remains only to pour liquid into bomb. To do this, you can use the pipette. It is not recommended to overfill a paper product, since because of this bomber may lose the base shape and break ahead of time.
Useful advice
These tips will help make a figure and retain the design in a holistic form much longer.
- Working with paper must be carefully. If you did not at the same place, it is better to take another sheet. Otherwise, the resulting design may not be so durable.
- When folding should be attentive. One wrong movement, and the bomber will not work. Therefore, it is necessary to act strictly according to the instructions.
- At the final stage it is worth avoiding water (Even small drops) on the outer surface.
In Soviet times, bombs threw from balconies on passersby. Now you can get an article for hooliganism. Therefore, it is not recommended to repeat.
On how to make a bomb in the Origami technique, see the next video.