Wire deer do it yourself: a phased scheme for creating a New Year's deer with garlands. How to make a frame and sketch?

Deer - new year symbol. After all, Grandfather Frost rushes in the snow in the sleigh charged deer. From under the hoofs of silver snow fountains, sparks of stars. Let in our house or near him will live a deer created by our hands!

Tools and materials

To make your own hands to the new year of the wire deer, prepare the necessary tools and materials.

Support such tools for work:

• Passatia;
• nippers;
• ruler;
• scissors;
• tweezers;
• hammer.

We will need the following materials:

• Scotch larger;
• durable threads;
• wire;
• paper, watman;
• pencil, paint;
• nails;
• Stationery power buttons;
• Silent wire.

It is necessary to say a few words about the choice of wire, because the duration of "life" of our New Year's friend depends on its properties. We are talking about the strength of the product and the properties of the material: the figure of one and a half meter growth from thin, the wire will simply doubt, bend under its own weight, and bending the four-millimeter frame under the energous toy will be difficult.

Here is a list of exemplary ratios, thickness and metal:

• up to 0.5 m - 1-3 mm, aluminum, copper;
• 0.5-1.5 m - 2-4 mm, aluminum, iron;
• More than 1.5 m - 4-5 mm, iron, steel.

In the range up to 0.5 m, the entire figure can be made from the material of one caliber. In other ranges, the frame is negle from the main caliber, and in the internal ligaments to reduce the weight and complexity of work it is better to use a soft wire of smaller diameter. The figure of a height near the meter requires approximately 30-50 meters of wire, depending on the filling of its volume. Buy a whole bay.

In addition, you can purchase a wire of different colors in the store: gray, green, yellow - for small-sized figures. Then you don't have to paint the whole form.

A miniature New Year's surprise to friends and native in the form of Christmas tree or desktop jewelry can be created from multi-colored cinema wire (fluffy) wire. It is sold by packages in stores of materials for needlework of a wide variety of types and colors.

Creating a sketch

If you are at least a little bit of artist, then yourself without much difficulty draw deer contours in any projection. All the rest will have to use ready-made templates. The simplest tool, naturally, the Internet. We find a deer drawing in the desired perspective. Print it on a sheet of paper A4. The figure will ultimately get no more than this sheet.

What should I do if you want to have a big scale of your creativity? The following method for increasing the size of the drawing is proposed.

• cut out the outline of the A4 sheet;
• We stick it into cardboard;
• Again cut out, get a cardboard pattern;
• We collect the scheme: vertically install this template, lighting it with a bright lamp, placing the watman sheet at such a distance to get the desired shadow size;
• Find out the shadow contour.

Note also that for a small increase in the sketch dimensions, you can apply the vertical layout of the shown circuit - the screen is located below, above the lamp, and between them the original template.

• The first type of template: one-connecting. Only one drawing is used.
• The second type is multi-mounted: individual drawings are drawn for certain parts of the deer housing. This is usually a torso, legs, head, horns, ears

Now let's see what contours we have. Below is very simple. Nevertheless, very similar to the deer, the proportions are perfectly observed. In the following figure, a multi-mounted pattern is also not bad.

Just a wonderful deer. We'll have to work hard to create this.

From core wire

Fluffy wire with an outer diameter of 1-4 mm is durable, it turns well with your fingers. Therefore, the frame of any figurines can be reached immediately, following its own fantasy, without drawings . Then to process the prepared frame of the same wire.

Look, what we have deer from fluffy wire. Unusually cute.

In conclusion of this part of the article, it is necessary to say that technologies, schemes, the templates given here are just guidance to action and are not necessarious. Think yourself, decide for yourself. Creative trumps in your hands.

Phased assembly scheme

Let's draw a master class for step by step assembly of our homemade Christmas deer. When making a frame to determine the length of the wire, the wire can be as follows: by contour clamping power stationery buttons, measuring length with a meter, plus tolerances for twist or winding with scotch.

The value of admission depends on the rigidity of the wire, is determined experimentally.

If the wire is too rigid to be bending with your hands, use the same method, only instead of the buttons you enter nails using them as stops during wire bends.

We practically did the first step: they collected the necessary material according to the previous item, made a pattern, that is, we decided on the scale of the figure of the deer. Step two follows from the project and the selected method. It depends on your taste and capabilities. We present two main ways to manufacture a deer housing.

With two contours

We measure the length of the width of the whole figure, cut off the piece of wire with the tolerance. Bend wire along the template line, starting with the rear empty, with such a calculation so that the ends meet in the neck area. Fasten. We make two such contours and a couple of horns. We combine the obtained billets close to each other in the spout area and tail.

• Now it is necessary to create a body volume: insert a wire pieces between the contours so that the necessary strength of the craft is created. The number of such inserts depends naturally, from the scale of the shape and the thickness of the wire. The connections themselves are made by twist with either passups.

• Then give the stability and the volume of the legs of the figure, winding them as carefully, adding new wire elements if necessary. Finally, we screw the deer horns.

With one contour

In this case, we recommend using a wire caliber wire for the main form than for the other parts. Fix the items in any convenient way: tape, thin wire, strong threads, twist.

• Watching the main body outline of the deer together with the head occurs in the same way as in the previous case, excluding legs: we will have 5 flat figures - the housing with head, 4 legs. And, of course, a couple of horns. Next, we make wire rings of different diameters, which depend on their location in the deer layout. Starting with the face, the rings increase in proportion to the structure of the body of the animal: take the diameter equal to the altitude of a flat figure in this place.

• Distance between rings 5-15 cm, depending on the scale. The number of rings is determined by the iteration method: first set 6-8 rings throughout the layout, check for resistance to defunctions and shifts, if necessary, add new rings between installed. From the tip of the nose to the tails from each BOK of the deer stretch over the segment of the wire, fastened to the rings. However, the number of lateral lines arbitrarily, but not less than one from each sides.

• We supply the wire rear legs. Do not forget to make admission for fastening. It is advisable to increase the area of ​​the support: form the hoof, bending the ring perpendicular to the plane of the leg into the inner side, under the abdomen. Attach the legs to two large rings in the back of the body. Then stretch on a piece of wire from the middle of the abdomen to the smiling. And between this piece and two wires, forming the leg, fasten the rings for creating volume: diameters decrease from the hips in proportion to the width of the structure of the leg.

• Almost the same operations repeat in the manufacture of the front legs, only the third pieces of wire stretching from the middle of the chest. We put a deer on your feet. Most likely, some manipulations will have to make it, giving the figure "proud posture" and stability: to strengthen somewhere, to adjust something, cut. The last barcode for a deer frame is horns and ears. Having the previous experience, make them not work. Check the strength of the horns and do not get carried away by the scope.

To create a deer in full size, you will need to cook his layout. In this case, instead of passage and scotch, you will have to use serious instruments, such as plumbing tees, welding, grinder - after all, the material will be a thickness of at least 4-5 mm.

In the following video, the process of creating a deer with welding is clearly demonstrated.

Ideas for decor

Here is a full scope for your creativity. Dozens of options and their weave. We will show here them the slightest part. First of all: if you poured a real work of art, nothing more is needed - leave as it is. In another case, consider the basic options.

Without an internal filler. The meaning is clear - we have a wire skeleton of a deer, we wish to refine it.

1. We take paints, paint a figure.
2. Take the thread of any texture, wind the wires of the frame.
3. We take Christmas-tree garlands, decorate the layout and so on.
4. Plus combinations of diverse decor elements.
5. The advantage is the richest perspectives for the use of internal volume. Position the light source there, and here it is glowing from the inside a wonderful deer!

With filler - cavity is clogged with a suitable material, the surface is covered in any other. Options are also infinite.

Beautiful examples

Please, that's what we have done. Better than verbal descriptions.

• On the first drawing on the left frame figure with the minimum decor. A neatly performed wire mesh, painted white, is clearly visible. The main carcass lines extected a New Year Garland.

• On the figure on the basis of the right mesh, linked by threads and highlighted from the inside. On the neck of the deer needle garland with a shishk.

• And here is a full-sized handsome deer. Note how shapes are withstanding. Proud turn of the head, beautiful branching horns. Catch his eyes on yourself.

• Homemade deer. The same technology, plus the second network of threads, picturesquely scattered on the body light bulb, modest decoration.

• Here is a snow-white stag. Technique with filling. Plastic bottles were used in combination with lumps of polyethylene and coverage of the whole figure with narrow and wide scotch.

• Look at this kid - the work of art. The technique of manufacturing here is a mini-dual circuit, with carefully made bends. Wire of different thickness. Please note how the spins are taken carefully.

• Two reindeer copper wires in addition to the above. Perhaps you can quickly dilute on your New Year's table or on the tree a whole flock, and even add dad with my mother.