The field chamomile is a bush flower, on one stem of which several inflorescences are located at once. However, this air and cute plant can delight the eye not only in the conditions of the country area, but also in the home interior. Masters have chic chamomile from Foamyran. The whole process turns out to be quite simple and understandable, so almost everyone can cope with it.
Materials and tools
Before the beginning of the creation of beautiful flowers, the Master must be stocking all the necessary devices and materials. So, Foamyran, which today will be discussed, began to be used in our country relatively recently. It is distinguished by elasticity, thanks to which it is easy to work with it. Soon the named material became quite popular. Many needlewomen began to turn to him. From Foamyran began to make various decorative components that look elegant and attractive.
The material under consideration is offered in the rich range of colors. Thanks to this, the masters have the opportunity to create beautiful toys, scenery from it, and even full-fledged thoughtful compositions that look very realistic. Often, Foamiran is called a plastic suede for his "obedience" in carrying out work.
To date, Foamiran is produced in the form of thin sheets, silky to the touch. The structure of the material is slightly porous. Produce it from foamed rubber, and it has such properties:
- is water repellent;
- can take a variety of forms under the influence of high temperatures;
- able to hold the form;
- It's not afraid of heat or frosts.
The stores sells Foamiran produced in China or in Iran. Recent options are recognized as better. For the manufacture of charming daisies, it is recommended to select Iranian elastic matter, because it is easier to work with it, and products result in more natural. If there is a need for this, it is possible to toned the finished crafts or powder.
Now consider in detail all the materials that will be needed for the manufacture of daisies:
- snow-white foamyran;
- green and yellow foamyran;
- cardboard and scissors;
- The sturdy wire of the floristic type, from which it will be possible to make a stem for colors;
- simple pencil;
- glue in the form of a pistol;
- iron;
- tweezers;
- toothpick.
The process of creating spectacular and realistic daisies is worth passing only after you prepare all the listed positions and place them next to you so that everything you need is at hand.
How to make your own hands?
As mentioned above, it is absolutely not difficult to make flowers from the fuel phoamyran. If you have never come across and did not work with this material, it is worth acting in accordance with the step-by-step MK to prevent unnecessary errors in any of the steps.
- First of all, you need to prepare a template of future colors. It is especially important to pay due attention to this stage if you are from among beginner masters. From the correctly prepared scheme / template will depend on the speed and ease of work on creating a craft from Foamiran.
- Draw on a cardboard sheet of petal. Its width indicator should be approximately 1 cm, and the height is 3 cm.
- Draw another piece on the cardboard, but already with teeth, like real flowerfish. The width of this part must be 2 cm, and the height is 6 cm. Carefully cut down the prepared patterns with scissors.
- The listed dimensional parameters are relative. If you wish, you can make these details more or less.
- The transfer of the drawings to the Foamiran itself with the subsequent pattern turns out to be simple and rapid occupation. The main thing is to be neat. Attach templates to Iranian material, cut all the elements by moving along their contour. Move the pattern to matter with a pencil, carefully cut down the line. After that, the pattern will be ready for further stages.
- Try to make sure that the petals of the future daisy are smooth and neat. But the leaves can be made differently.
- To build a small but beautiful bouquet of 3 daisies, you need to prepare the following components: 11 petals, 3 strips of yellow phoamiran for the center of colors (approximate size - 0.5x14 cm), leaflets from green material - 5 pcs., CHASHELISTIC (for Founding Flower) - 3 pcs. Of course, the number of listed components can be different.
It all depends on what colors you want to make with your own hands.
Prepare all the details, it is worth considering the master class to make all the necessary parts.
- Attach the petals to the surface of the iron until they are slightly curled. Then treat these elements (you need to do it immediately) and set out the iron.
- In the middle of each petal, do neat stripes, flying to a sharp toothpick angle. So the details will acquire a specific form.
- Next you can make the middle of the colors. Along the long edge of the strip, do shorts on 2/3 of the segment width. Then one of his edge is fixed on the wire (with a nozzle must "look" out), as if twisting roll. In order not to encounter spinning, the adhesive composition should be applied to arbitrary areas of the strip surface along the operation.
- Securing the middle of the chamomiles, they will need to neatly cut on the edges with scissors. It is necessary to create an interesting surround effect.
- Then the top part of the middle will need for a short time to hold over the candle or fill the iron. These actions will be needed to secure the result and give daisies a more natural look.
- On sheets should draw a streak using the pointed edge of the toothpicks. Thus, you should enroll with all the elements of future colors from a bouquet.
When all components for the entire composition are prepared, you can proceed to the assembly of daisies. Consider how it should be done correctly.
- Bear parts using a special adhesive solution. The perfect solution will be a glitter. Working with it is very convenient and easy. The flower composition is bonded using this component, it turns out more accurate, not having ugly sublists.
- At first, you need to attach the narrow parts of the petals to the side part of the middle in a circle.
- Then you should take chashelistic. Cover the lower half of the middle and the cuts of sheets. For this purpose, it will be necessary to turn it on the skeleton from the wire and glued to the bottom of the chamomile.
- Each of the leaves will need to be gently bent in the middle, and then it is possible to change the look to get more natural.
- Then all 3 chamomile need to gather in one bush.
- Attach the chips leaves. It is desirable to close the locations of the wire, as well as areas with defects, if any.
In such a composition, it is quite possible to add another bud, made of snow-white and green phoamiran oval shape, obtained by twisting 2 steps.
Useful advice
If you are configured to independently make spectacular and naturalistic flowers from Foamiran, it is worth arming with some useful tips and recommendations.
- All items for future bouquets or single flowerflowers need to be cut as closely as much as possible. If damage or some defects remain on the material, they will be noticeable on the finished handicraft and will spoil its appearance.
- You should not think that only small flowers and bouquets can be made from Foamiran. If desired, from this material will be able to build chic large crafts. The main thing is to stock up the necessary number of phoamyran, preferably Iranian production.
- Stretching and adjusting the form of details for colors is necessary, while they are still warm after handling iron. At the same time, it is necessary to act neatly so as not to spend the blanks.
- Instead of an iron for warm-up, it is possible to use a lit candle. The main thing is to comply with security and be careful.
- The template for creating future colors can be sketched independently, and you can find attractive charts on the Internet. Each master decides what basis to rely on him.
- For cutting blanks, it is recommended to use exclusively sharp scissors. Otherwise, the process of preparing the necessary parts will be long, difficult and not the most productive - many elements can be spoiled by stupid blades.
Beautiful examples
From Foamyran, you can make a lot of beautiful colors and flower arrangements. Such products are capable of becoming a spectacular interior decoration or an original gift. Consider some successful examples.
- Chamomile from Foamiran can be made more interesting and attractive, if you add the miniature figures of God's cows sitting on their dye.
- Flowers will turn out brighter and original if the petals are made multicolored, but the central part leave yellow. Externally, such crafts will look fabulous.
- From the Iranian Red Foamyran, you can make elegant growth roses with huge magnificent buds. Similar scenery will noticeably stand out in the interiors set down in calm white colors.
- From the considered pliable material, it will be possible to make a chic bouquet in a beautiful packaging made up of several large roses buds of various shades. For example, it can be white, beige and dark purple flowers.
An interesting combination of paints will look fresh and stylish.
On how to make chamomile from Foamyran, see the next video.