Graceful peonies from Isolon are luxuriously look in the concept of any event, and photographs give a special charm and beauty.
Peculiarities
The basis of the flower - isolon - you can purchase in any construction supermarket, where it is more famous called Polystoinoethylene. Sell this material in rolls, for the manufacture of colors, sheets are used, the thickness of which is 2-4 mm.
Isolon has different colors. The main reason is that this material began to use for the manufacture of artificial colors, is that it can be easily cut with scissors or a knife. Another feature of this material is the impossibility of toned with conventional dyes, that is, only a certain kind of paint can paint it.
Isolon is a safe material that does not excrete carcinogens. But the main advantage of such a material is the ability to give the petals the necessary bends. This is possible because of his ability not to burn at high temperatures, but melting, flexing to the desired form. That is, there is a slightly processing the petals with fire, it is not much difficult to give them the right shape and the necessary waviness.
Due to the fact that the material is quite thin, it is possible to achieve such natural flower forms. The finished petals most often fasten with each other under the influence of temperature, but you can also sew them or glue.
Do not forget that the isolon is able to "remember" the form. Therefore, such flowers can not be argued, because the leaves will remain in the leaves, which will affect their appearance. If such a flower is worst - it will not affect their appearance. But they poorly tolerate the straight sun rays - begin to turn yellow, especially for white isolon.
Tools and materials
For work you will need:
- Technical knife or scissors;
- glue pistol;
- hairdryer;
- acrylic paints.
Calculate the number of required material. We fold the area cut off the petals. In most cases, this is one or two standard sheets.
Pyon manufacturer options
- Consider a step-by-step master class for beginners for the manufacture of colors.
- We select the color of the future flower. Select a kolas for you, but it is advisable to stick to natural shades.
- It is necessary to determine the size of the petals. Before starting work, you need to imagine what you want to get according to the result, because the petals are very different from each other by dimensions. A small flower has a size of 1 and up to 14 cm. And for the manufacture of a large peony, the thickness of the isolon should be at least 3 mm. The volume of the whole flower depends on it. Although the number of petals is strictly limited - it all depends on your imagination. But you should not take too tight material, such petals look untidy and rude.
- Preparing and cut out patterns. Usually, the scheme is drawn on plain paper, and then cut out.
- Let's give the sheets form. Heat the isolon, slightly stretch the leaves. Do not forget to navigate the real flower.
- We glue the finished petals of hot glue. Do not forget to take into account the location of petals, like a real flower.
- Covered ready-made aerosol paint flower. This process is done in cases where it was originally such an author's idea.
The leaves on the stem is made by the same technology as the petals: cut out along the harvested pattern, sweep according to the general model and glued.
Templates of petals
The size of the template, identical to the size of the finished flower: medium petal - 20x20 cm, and 45x45 cm is possible and more. Creating overall flowers, you are not tied to the parameters. The diameter of the floor peony is capable of reaching one meter. The manufacture of such an outdoor peony is a rather painstaking job, but the result is worth it.
The whole technique is quite simple and accessible to work to beginner masters.
So that your job has a realistic look, you need to thoroughly know the structure of the peony. If you pay attention to the flower, then the edge of the petals is partially carved, which gives it its own feature, and experienced masters it is well known.
Rostova
Large flowers from Isolon made with their own hands are more often used as a one-time decor for holidays. If such peonies are used as a permanent decoration, then a binding to the overall interior style is already important.
Creating any flower is always starting with a sketch. At first, they are determined with the type of flower - it can be a natural, and fantasy form. The next stage is the selection of the shape for petals and the model of the flower, the choice of shade and style. Working on templates, immediately correlate the size of the petals and the dimensions of the finished decor, immediately determine the thickness of the isolon. In overall colors there are no clear frames for limiting the size. PIONS, the diameter of which reaches the meter can be used in street design, but sometimes there are more. In the decor of the premises, it all depends on the occupied area and skill of investors. The most allowable flower size is 300-400 mm, the average is 200-300 mm, with a middle of 100 mm.
Peony is perfectly holding the form, most often it gradually increases, bringing to the required diameter.
Creating large buds, it is important to choose to choose a support. With the visible lightness of the material used, meter flowers need a durable mount in the Chashelistic area and in a strong stable stem. Under such flowers use steel racks from wire, polymer pipe or, in general, frame structures. All these frameworks are beautifully decorated with decor or hide among the greenery.
Having calculated the size of specific petals, we harm the required number of templates: internal and outer petals, a cholestic, outer leaves. Further softening the details of the hot hairdryer, we give the petals to the desired form, we work on each bending and figured incision at the edges of each terry petal.
The flower assembly is carried out by hot glue, furniture stapler and wire. In the completion of the process - staining, but, as practice shows, most often it is a flower tint. The Isolon has a wide color palette, the colors are very close to natural, so most often enough to apply a little acrylic paint with an aerosol cylinder, varnish or a pearl - and a huge flower comes to life.
Little
Very beautiful, touching and gentle little pioneers will become an excellent addition to a large composition or a general decor.
Step-by-step production:
- We draw a pattern and prepare the workpieces;
- We form the petals, having warmed them and collecting them in the "harmonic";
- We collect a flower - as a core, we use a foil ball, which is gluable with isolan and tie into threads;
- We glue the core, start with the smallest petals, gradually moving to large in size;
- In this way, we glue all the petals;
- The final stage is the fixation of the Chasselistic.
Lamp
The lamps from isolon differ in altitude, diameter and style. Isolon plafones are so light that for a large flower and for a luminaire-bouquet there will be a simple fastener in the form of a polymer pipe, and the overall terry flower will easily secure on a pipe with a diameter of 40-50 mm. This assembly is considered to be reliable for both the flooring, and for the wall lamp. The processes of production of the night light, a desktop lamp and a lamp differ in each other. Also differ in the method of assembling the lamp plate and flower lamp. In the assembly of the latter, the finished beam is used in the form of a bowl, and the flower lamp is mounted on the coupling, where the base of the LED light bulb is inserted.
For the stability of the flooring, they use a heavy stand, for bedside - needed fasteners on the wall, and for desktops - the basis of an ordinary household lamp is perfectly suitable.
On the wall
Such a flower will be an excellent decorative solution for both residential premises and a photowon. Bright, elegant peony can be an excellent addition to the flower arrangement or become the basis for the original panel.
Two fastening methods are used.
- Under the panel make a special wall with hooks and holes. Peonies are hung on fasteners using a large paper clip.
- When you need to decorate the wall, but you can not do a large number of holes, then a piece of punctuents, pieces of foam or rod in the most secluded places are fixed. The formed sites are used as bases and with the help of clips and clamps fasten flowers. Eaves, door slopes and any other surfaces where there is an opportunity to attach the decor without making them damage, can also be used as the bases for the decor.
In a big cup
Such a composition of peonies looks elegantly and gently. Such a present can safely give an expensive person.
How to make:
- Cut the petals on the prepared templates;
- Fenom do form;
- On a piece of wire, we glue the insole bar, and on top of it - parts;
- glue alternately petals, we glue a chaselistic;
- We put everything in the selected cup or other container.
Recommendations
One of the important tips who give experienced craftsmen is to choose the material. It should be high-quality and different thickness for different products. but Isolon is very sensitive, so it is important to control the temperature when working with it. A variety of MK on the manufacture of peonies and the obtained recommendations will allow you, even without having experience with this kind of material, create your own unique decor element, which will give charm and individuality to your interior.
Mater-class on creating a peony from Isolon see video.