A variety of wall-mounted lamps from Isolon can satisfy the sophisticated taste of any designer. The sconce and lamps made by their own hands will create a unique style and comfort of your interior. Elegant and non-crack material will make the product exclusive with all the simplicity of manufacture.
Description
Isolon is polyethylene, the structure of which consists of cells. This material is distinguished by the elasticity and softness and porosity of the structure. The material is pleasant to the touch, easily takes the desired forms. There are two species - stitched and unstable, each of which has its own characteristics.
Waterproof and robust base is resistant to ultraviolet and chemical influences. Holds a form from -75 to +75 degrees. There are several types of isolon, with a foil layer and without it. It is white isolon and used for the manufacture of lamps.
The main advantage of the material used is its environmental friendliness.
What are there?
Showing interest in the manufacture of wall lights from Isolon, you will be amazed how wide the variety of styles and variations of the product. Bra and night lights in the form of flowers (roses, lilies and chrysanthemums) can be recreated with your own hands. The color palette depends on the selected sample. Lamps for girls are made in the form of dolls, and for boys in the form of a soccer ball.
Creating your own hands
Master class on creating a wall lamp for a boy in the form of a soccer ball.
Such an element of the decor will undoubtedly decorate the room of a small future athlete.
It is easy to do this, you only need to carefully cut the parts. So that all joints perfectly approached and did not go abroad.
Materials
For the manufacture you will need:
- Black and white isol;
- green foamiran;
- circular shape laying;
- The cardboard from which the template will be made.
Instruments
Some devices will also be needed:
- ruler for measuring the size of the part;
- pencil;
- scissors;
- glue gun, but can be used and ordinary glue;
- Hair dryer (for heating and plasticity parts).
Manufacture
To make a lamp, act according to a specific scheme.
- Cardboard sheets made templates - 2 patterns (they should be in the form of a five and hexagon). The width of the parties should be 3 cm. Of the black isolon-pentagons in the amount of 12 pieces, and from white - pentagons in the amount of 19 pieces.
- The leaflets of the isolon are warmed with a hairdryer so that all parts on the plafof are tight and smooth. To do this, in the middle of the leaf, a small deepening is made.
- Then all parts are glued with a glue, with a glue gun. Start an assembly from the top of the top, dropping along the work on the bottom of the lamp.
- In the process of assembling, white sheets are attached to black.
- The grass is cut out of the phoamyran green. For this, sharp teeth imitating grass stems are cut out of the material. Carved herb, glued at the bottom point of the lamp at its circumference.
- As the base of the ceiling, a cartridge from a lamp or chandelier is used. The only condition is a whole base.
- Having finished the assembly, insert the cartridge into the floff, with the already connected wire.
Shutdown: Connecting a plug and installing a light bulb.
Master class: how to make a lamp on the wall in the form of roses from Izolon
Prepare the following materials:
- Isolon sheets;
- the coupling (the wide side of the diameter is equal to the size of the cartridge, and the narrow - pipes);
- Cartridge with ring;
- 3 meters of wire;
- Switch with a fork;
- LED light bulb;
- Tube 50-60 cm.
We will need tools:
- knife or sharp scissors;
- hairdryer and screwdriver;
- Gun for glue, glue.
Do not do without electrical part
Disassemble the base, helping myself a screwdriver. Clean the wires. Insert the wires into the lower base part and mount. Close the base. Clean the wire with the basement in the coupling, and tightly tighten. Wrap the coupling into the workpiece, it will be the middle.
The flower assembly will look like this.
- On the coupling, put two petals on the glue, wrapped the base. The basis is ready.
- We continue to glue on the coupling first small, then large petals.
- Having passed the first row of petals, from the second we start the heating with a hairdryer of each petal. Slightly sprawling up to get a wave edge with a bend of the dinner.
- In the middle, you need to make a little deepening so that the isolon leaf acquired the rose petal form.
- When all rose petals are made, continue to glue their flashes. As a result, one petal is located between two other petals.
- Tube twist as the basis of the lamp in the form of a circle or square. You can enclose the basis of more straight petals
- After the assembly, insert the cartridge in the clutch with the connected wire.
- Attach the plug, switch and light bulb.
Wall lamp in the form of roses is ready.
Tips for care
So that the lamp served for a long time, you need to follow some rules for care.
- It should be remembered that the isolon is afraid of heat emitters. Therefore, you should not hang lamps near batteries, fireplaces and risers (pipes). Light lamps are used in the lamps.
- Flower petals and other parts of the decor should be wiped with a damp soft cloth, from dust and other contaminants. Without the use of abrasive cleaning products.
- Use a hairdryer with a cold blowing to remove dust.
Use an antistatic to avoid excessive sticking of small porcelines, pet wool and dust.
Beautiful examples
Flowers
If earlier, non-residential flowers were considered a sign of a bad taste, then the flowers from Isolon are increasingly conquering laurels of the decor. Different in size, shade and form they become decoration of celebrations, holidays and photo studios.
Registration of walls, panels and paintings. Making growth colors on long stems, both independent decor items and analogs of lamps.
Lamps-toys
Registration of the children's room with lamps for a boy in the shape of a soccer ball, or any toy. For girls from dolls, lamps to fabulous characters. Isolon will complement any projection of toys.
The versatility of the material of the insolon is obvious: its plasticity, moisture resistance and not flammable. Freely cuts both a knife and scissors. Complexed care for products during operation and durability.
A huge selection of beautiful products for every taste can be created with your own hands. Modern trend is gaining great turns at the expense of their advantages. From ergonomics and versatility to the expanser's own fantasy.
You can learn more about the wall lights from Isolon in the following video.