Bouquets of dried leaves allow you to fill the house by nature and keep the autumn mood to save the autumn mood. Most of them are easily created by their own hands.
Work features with material
It is not enough to simply collect beautiful leaves of birch, maple, oak and other trees, in most cases they must also be processed correctly. The easiest way to leave the plates drying between the pages of a book attached by a heavy item. Despite the fact that this method does not require special efforts to execute, the result is not always satisfactory: the leaves are fragile and short-lived.
They are also often treated with an iron. The source material is laid out between two sheets of paper and stroke through the entire perimeter. This method allows you to quickly prepare plates for further creativity, but does not provide their durability and resistance.
A good result gives treatment with paraffin. At first, the candle is crushed on the grater with the smallest holes, and then heats up in the microwave oven to the consistency of thick sour cream. The substance is distributed to the tassel over the entire surface of the leaves, and then they dry either in a suspended state or on newspaper paper. It is worth mentioning that this method is suitable not only for leaves, but also for rowan, cones, acorns, twigs and other gifts of nature.
Preservation of unusual material is carried out with the help of glycerin. The solution is prepared from 1 part of water and 1 part of the substance. After soaking, the leaves are dried in a suspended state over several days.
Finally, the most fragile plates can be lowered into a solution from one piece of PVA and 4 parts of water, and then dry in a dry and well ventilated place.
Dry blanks are recommended to be stored in a dark place. If the apartment is too hot or too dry, then it is better to bring them to the balcony.
In fact, the storage temperature may be any, but it is important that the leaves do not fall under the influence of direct sunlight. If the plates become too dry, then they can be sprayed from the sprayer and wait until the risen areas moisturize.
It is also worth mentioning that maintaining the appearance of the finished bouquet will be able to succeed with the help of an ordinary hair lacquer. To complement dried leaves is made by spikelets, cones, branches and seasonal products such as pumpkin and patisson. As a decor for natural materials, burlap, twine, satin and lace are suitable.
Easy options for kindergarten on the topic "Autumn"
A simple master class will help the child to create an autumn craft for kindergarten. For example, such an elegant bouquet will require the use of acrylic glossy varnish, maple leaves, pure twigs, scissors, tassels and thin wire. The finished composition is best placed in a simple glass vase. First of all, all the leaves are lacquered on both sides and are left for drying. Next, with the help of wire, their cuttings are attached on branches. By the way, it will be a big plus if the metal thread will be close in color to natural materials. Upon completion, all branches are exhibited in Vaza.
A composition that contains not only dried ripper leaves will be very original, but also a cones of several species: pine, fir and cedar. In addition, the paper uses thin and thick branches of trees, moss, thin wire, foam balls with a diameter of 15 millimeters, acrylic brown paint, foam, foam rubber and basket. A glue gun, cutter and scissors appear in the role of the main tools. The first thing the bottom of the basket is filled with a circle of thick foam, which is covered with foam rubber. Durable branches are sharpened at the ends, and flowers from halves of foam balls and cones are collected on them.
After the branches are stuck in the foam rubber, the ground in the basket will need to decorate moss and cones. Rowan leaves are glued on thin branches, and they are also attached on the ground.
How to make a bouquet of "roses"?
Following step-by-step instructions, the child together with his parents can do a bouquet for school from wild grape leaves. To work, it will be necessary to collect a sufficient amount of natural material of different shades of red, and also stock thread, fabric for wrapper and sparkles. The process begins with the fact that a small bud is folded out of the leaf. Then other plates come to it with a bending. Having received a large bud, it will need to be reappeared with a thread.
If necessary, use the thread at intermediate stages. After collecting a bouquet, it will be necessary to wrap green sheets of the same grapes and wrapping cloth. The finished composition is decorated with hair lacquer and sparkles.
Very beautiful, a bouquet of autumn maple leaves is obtained. In addition to the main natural material, threads, scissors and wooden spanks are also involved. First of all, a beautiful maple leaf folded horizontally in half. Next, the billet is twisted with a tube, forming a dense bud, which immediately at the root is fixed with a thread. The second maple leaf is also folded in half and is used to wind the base. This item will also have to fasten the thread.
The addition of plates continues until the rose will find the desired volume. To obtain a revealed flower, the leaves in different ways are rejected to the sides. Finished rosette is fixed on a wooden wand. Similarly, at least two flowers are created. A bouquet is made up by large maple leaves, as if wrapping paper. For three roses, about 5 plates will be required, which are also tied with thread.
How to make the composition "Flowers in the basket"?
Crafts in the form of a bouquet of leaves, candies and colored paper will become an excellent gift for loved ones and relatives. The list of materials used includes fallen autumn leaves, small apples or cones, wooden spanks, candy, corrugated paper, tape tape, foam, scissors with a ruler, thread and grid. Welcome a ready design will be in a basket. First of all, a piece of foam of suitable size fit into the basket and is covered with a grid. The autumn leaves are drawn up the edge of the base.
Candies are tied to wooden spanks threads and wrapped in "petals" from corrugated paper to get flowers. Wooden speakers are wrapped with teep ribbon, after which they are inserted into the foam sponge. The gaps in the basket are filled with apples, cones and other natural materials. The composition of the composition is tied a lush bow.
To get the composition "Flowers in the basket", you can first make several roses made of maple leaves, and then arrange them in a basket from the same material. To create the basis, it will be necessary to free a sufficient number of records from cuttings. Next, the air ball is inflated to the desired size, and PVA gloves in a plastic bowl. The ball is covered with any fat cream and is installed on a solid stand, for example, in a saucepan. Each maple leaf dipped into the glue either asks them with a brush.
The plates are alternately glued to the ball in such a way that no gaps remain. To get a solid design, it is better to form several layers. The finished aircraft is carefully launched with glue and is left to dry over a couple of days.
Other ideas
With your own hands to make bouquets, it turns out from other natural materials.With rowan branches
In bouquets and autumn compositions, rowan twigs are most often combined with dried leaves. For example, it can be a combination of bright red leaves of aspen, as well as brushes of red and black-like rowan. In addition to them, The work is involved with a bowl of jute threads and a glue thermopystole. At the preparation stage, dry leaves and direct creation of the foundation take place. It is done as follows: the air ball is winding with jute threads and is impregnated with a solution of the wallpaper glue. After drying the twine, the ball skeins and removes.
Aspen sheets are used to form roses. The first sheet is folded by the tube and is fixed with a thermoclaim. Then the second, third and further turns on top of it until it turns out the bouton. The number of roses present in the composition is determined independently - in principle, their number can reach 15 pieces. The finished flowers are attached to the ball from the thread: their "stems" of several cuttings are made through the threads, after which it is processed by hot glue. The gaps between them are filled with clusters of rowan.
It is important to mount the details as close as possible to each other so that the jute can not be visible at all.
The finished composition can be placed on the decorated bottle.
From the leaves of corn
Very beautiful compositions are obtained from leaves, in which corn cobs are hidden. Collection of this natural material is carried out from the middle of the summer and up to mid-August.
It is important to remember that only wide bands are suitable for creating colors, which are separated from the patch before the needlework process and are necessarily soaked in warm water.
Each is cut off the hard end, and the soft part is folded in half. The whole creative process is carried out with the help of scissors and a soft wire.
Folded in half the blanks are shortened until they are comfortable to keep in their hands. Then they are cut, and the rose petal is cut out of each fragment: a narrow bottom and slightly rounded upstairs. He neatly strifted out with thumbs, after which the tips slightly twisted on the pencil. Boot assembly is carried out, as when working with corrugated paper. After the formation of the middle tube, the petals are alternately connected to it.
In principle, a magnificent flower can be left from 8 to 11 petals. The base of each bud is tightened with a soft wire. All is unnecessary cut off, but the part is still left for a cup. Ready flowers are put on spanks or pieces of thick wires, rearranged by green paper. Chasselistic is also decorated with paper.
Further, see the master class to create a bouquet of autumn leaves.