Snake Gorynych from Plasticine is a simple and elegant handicraft, and quite a few people will be wondering how to make it with their own hands with a silent stages. Another important point is how step by step make a picture of Gorynych from plasticine on cardboard children. There are other ideas, including the creation of a composition with acorns and volumetric figures.
How to make on cardboard?
Immediately it is worth indicating that the snakes of the Gorynych from plasticine on the cardboard is a rather time-consuming handicraft. But it will be clearly different from other items. Cardline will be a good stand. There will have to prepare quite a few plasticies - even many dinosaurs go less. For the sample you can take any thematic picture of this fabulous creature.
Most often it makes a pure green color. To work, even prepared adults will need an average of 30 minutes. For children, it is better to stay up to 1 hour so that they do not worry that they do not fit.
Plastic knife will help with the material. Getting Started in stages, it is worth starting with the preparation of the heads - that is, 3 approximately similar in the magnitude of plasticine balls.
The next step is to roll off; They must also be roughly homogeneous. One edge is somewhat coat, and the second is expanding. Then the blanks are combined and the joints are missing. The following steps are:
- formation of the harvesting of the case (first in the form of a drop);
- Preparation of 4 balls that will become eartures;
- giving these balls of the drop-shaped and wrapping of acute edge;
- gluing improvised paws to the body;
- checking the stability of the figure;
- Fixing 3 heads on the front of the workpiece;
- Preparation of spikes on the back (they are created by applying a sprinkled blank, cutting spikes with a knife from one edge);
- attaching these spikes on the back;
- Preparation of wings (with lubrication of joints);
- checking how imitated creature looks like;
- rubbing paste and nostrils on the heads;
- sticking 1 black and 1 white bowl for each of the heads (black on top of white shapes);
- Installation on a cardboard stand.
How to make natural materials?
With shishkoy
This technique is also very popular. The modeling of the Snake Gorynych is step by step with a lump - or rather, with 3 cones - not too complicated. It will take 1 major pine escape for the main head and another 2 or 3 bumps are smaller for secondary heads. Next, it will be necessary to twist from red or pink plasticine "Paws". Their billets are fused in the form of "sausages"; These structures are finalized by a plastic knife, getting "fingers" - whether to make such work until the attachment to the shishke below or not, purely personal matter.
Eye couples on the heads are desirable to form from white and purple plasticine. In order for the old Russian dragon to look more organic, it is recommended to additionally make ears. Their form and the magnitude are not too fundamental, but it is better if they are clearly a beast. Then the heads join the body. The wings are cut out with a knife of manually plasticine "lepsek".
With acorns
You can make such a composition to school, and even in kindergarten. In addition to the acorns, they often need chestnuts. Throws the holes in them with a sewn or other long island, cut a cinema wire for 3 plots. Attaching them to the acorns, get heads. Further:
- fix the heads to the chestnut housing;
- Fasten to this body of legs (cut into 2 parts of acorns);
- stick to the gidesma of plasticine to increase stability;
- Prepare heads and mounted them on laid places.
Surround figurine do it yourself
This option more often implies imitation of not an old fairy-tale image, but its presentation in modern cartoons. These cartoons are better to watch a couple of times to remember well.
The best frames are more correctly printed separately. Basically, bulk figures make red. It is advisable to choose the plasticine of darker shades.
The billet under the torso and the tail will be like a drop. Semi-finished legs make, stretching plasticine into the long irregular shape of the "tube". After the bending of the arc, you need to make a couple of round pellets. These pellets will become a kind of "feet"; To get a "claws", take a gray or non-timber white material.
Next will have to:
- glue legs;
- decorate the tip of the tail with a heart or a brush;
- form cervical blanks;
- Slide plasticine in the pellets and stretch them into the wings (better if they are modest on the background of the figure);
- create "handles" (plasticine cakes and thin strings);
- join the "handles" again of claws;
- pull the nasal part of the head;
- make a cut under the mouth and squeeze the nostrils with a match head;
- add to the mouth of the fangs (optional);
- Put small sharp ears.
On how to sculpt the snake of the Gorynich from plasticine, see the next video.