A huge number of cartoon characters gives children a large space for fantasy when creating plasticine crafts. Among them, in recent times, there was increasing popularity with a gentleman from the painting "How to Train Your Dragon". In many ways it happened due to the interesting and original plot and colorful heroes. The boy's friendship with the dragon simply cannot but cause delight. However, in order to make a dragon figure from plasticine, you will need to work well.
Tools and materials
Of course, at first glance, there is a rather complicated sculpture, but today there are many different techniques. They allow you to make a fantastic hero to children of various age groups. For the smallest craftsmen, you should choose as simple variants as possible.
To revive the shooting figure, you can use the simplest plasticine that is sold in any stationery store.
Air plastic mass is also suitable. She is good because it is capable of sticking, and this prolongs the life of sculpture.
Before modeling, it will be necessary to prepare the following components:
Plasticine Bars: Black, Yellow (Green), Gray;
stacks of plastic;
toothpick;
the liner to protect the working surface;
Plastic stand on which it can be left toy.
Versions of Leski.
To blind is not completely unreleased from plasticine, if you use the instructions where everything is written step by step. There are several options for modeling this funny character. The simplest of them contains the following actions.
At first, plasticine must be well mounted with his hands so that it becomes soft and pliable. After that, to form from it any parts of the dragon will be very easy. At the same time, the two smile black plasticine bars are connected to each other.
After that, the plasticine mass of black color is divided into 4 parts. And they make them different in size. So, it will take the biggest piece to create the body. He is given the shape of an elongated oval, which is slightly narrowed up.
The second part has a smaller size, and the head is made of it.
The parts obtained are combined with a toothpick.
The third part is used for the manufacture of paws. The rear must be made in the form of a drop. At the same time, their larger edge is a bit pressed. The front paws look more thin, they are longer. Their lower side should also be slightly pressed.
The basis of the dragon is ready, and now it is necessary to go to its detail. Under the eyes are made small recesses. They are attached to balls of yellow and black plasticine, and then flatly flatten. As a result, there are eyes with pupils. Eye can be supplemented with two white glare dots.
At the place of the nose, it is enough to sell two holes.
The smallest piece of plasticine is spent on 4 ears. Of these, two are larger, and two are a little smaller. They are trying to give the shape of a drop, and then slightly flatten and sharpen the ends. From the middle of the head and all over the body of the dragon from the back are made of small spikes.
At the ends of all paws using stacks or toothpicks are made of deepening. White claws of arbitrary shape are glued there.
Wings are performed from two blanks of equal size in the form of a drop. Their edges should be kept in several places, and then, smoothing, dilute in different directions pointed parts.
All remaining plasticine spend on a long tail, at the end of which the fin makes.
So that the dragon turns out more interesting, it can be supplemented with a piece of fish. It is easy to make gray plasticine.
With your own hands, you can make a somewhat different option of toothless, with whom the children of the older kindergarten age and the student of the first classes will exceed perfectly.
As always at the first stage, plasticine softening and separating it into parts. For the figurines, you will need one large piece (torso) and four pieces are smaller. From the latter will turn out the head, tail and paws. You should also postpone the small part from which ears and spikes will be manufactured.
The dragon torso is made in the form of a cylinder, and the head is a ball.
The resulting details are connected and adjust their shape slightly.
The front paws are made elongated, and their ends are complemented by claws.
The tail is performed long, and at its end it creates a sharpening in the form of an arrow.
The rear paws are made in the same way as the front, but only shorter.
Along the entire figure, in the middle must be attached the spikes. They must start head and end on the tail.
On the face of the eyes make from flat pieces of plasticine yellow, black and white colors. Each subsequent layer in the eyes should be smaller diameter.
Wings are performed dropped and large. On them for relief stack line are applied. Then they are attached to the back of the Night Four.
There is a more beautiful version of the winged hero from the cartoon "How to tame a dragon?", But it requires greater detail. It can be mastered by children, starting from 8 years old and older. The creation of a miniature figurine of the dragon stages as follows.
Black plasticine kneads and create the bulk of the body from it. It will be elongated with a pointer at the end. And on the one hand, the torso must expand and round.
On the pointed end of the tail attached 3 parts in the form of a drop with each of the sides. Also along the back small spikes are made.
All paws have thickening to the bottom and are a little curved at the ends.
When collecting the shape of the body, the front and rear paws are joined to it. As for the tip of the tail, it is slightly twisted.
The head is made in the form of a small bowl, pointed on the one hand, and is attached to the body. It is pushing the recesses in which there will be eyes.
The latter are made of green plasticies in the form of round plates. Black plates of smaller diameter are attached to them. White glare are performed in the form of small points.
Paired chips and spikes are mounted on the head. The mouth is drawn with stacks.
Wings should be the same in shape and size. It can be made on one of their edges jar. After that, they are fixed on the back.
Useful advice
If desired, to make a dragon with a real souvenir, it is possible to use sculptural plasticine to manufacture it. Figure night fury is capable of daylight. It can be done according to the same instructions, replacing black plasticine on white.
When working with plasticine, soap water is capable of helping. Convenient when a bowl with such a solution is on the table next to the working surface. In it, it is possible to make hands so that the plasticine does not stick to the fingers and left the traces on them. Preferably before modeling the child to wear apron and wrappers.
Very comfortable when the space for work is conditionally divided into two zones. In one of them will be directly the process of modeling, and in the other - plasticine and tools are located.
How to make a dragon toothless from plasticine, look in the video.