At the age of one and a half to three years with a child can begin to engage in modeling. Developing motor skills of hands using plasticine, children quickly develop, acquire useful qualities such as perseverance, patience, creative thinking, imagination. After 4 years, kids have already obtained quite recognizable figures.
How to work with the material?
Plasticine tend to harden, especially in cool conditions. To soften, it should be a long time to knead in hand. If the child is too small, the adult will have to help him. Can accelerate the process by holding the bar under warm running water.
For kids it is better to buy a set of light or air plasticine. This material is colorful, soft, plastic, molded easily and leaves no greasy residue.
On the first lessons offer the kid just tear off pieces of the bar. Then teach him balls roll. Let connect them as he likes, he will be able to see the fruits of their labor.
What is necessary?
Before you do creative work, it is necessary to prepare the material and the workplace. On the table lay a special board or oilcloth, then countertop remain clean. Need a plastic knife (stack) for cutting clay, prepare a rolling pin or bottle for rolling tortillas.
Decorate work can be beads, buttons, beans, shells and other suitable elements.
Volumetric paintings and panels
Exciting gift can be a card, a painting or a mural of clay, for example, with a composition of flowers or still life of vegetables. On paper, the heavy stuff will not last, so prepare for cardboard. We offer a workshop for the production of panels with a sprig of cherry blossoms.
- Roll out a strand of brown clay, cut fragments and lay out on cardboard branch.
- BLIND lots of little pink cakes and roll tiny yellow balls.
- Make elements of the prepared flowers with five petals and a yellow center.
- Decorate with a branch of flowers.
- Make a couple of colorful harness and make edging for panels.
Figures of people
Vyleplivaya men should observe the correct proportions:
- from the head body is 1 / 7-1 / 8 moiety;
- waist located approximately midway figures;
- drooping hands should not reach the knees.
Tell stages as blind figure.
- Head roll ball of white clay and slightly lengthen it.
- Shape the nose, draw a mouth, white and black material blind eyes, eyebrows mark.
- Fashion a shirt in a bar with two short sleeves.
- The same bar prepare trouser, cut longitudinally, dividing by 2 feet.
- Roll hands-sausages and feet-lumps. Collect the elements of the little man.
Beautiful animals
Children are glad to be blind from ordinary plasticine model raccoon, horse, zebra and even a whole zoo. We offer to cut out a beautiful elephant.
- From the gray bar, roll 2 balls of different sizes.
- A large ball (torso) slightly lengthen and connect with your head.
- Make 4 cone-shaped legs. From a wide end to each leg, glue 3 fingers, rolling them with peas of white plasticine.
- Using fragments of matches, connect legs with a torso.
- At the bottom of the tail, similar to carrots.
- And glue 2 big pellets to the head (ears).
- Cut the trunk and make a pencil deepening with one of the sides, connect with your head.
- For muzzle, blind eyes and 2 white fangs. Connect.
How to make birds?
Everyone can cut off her beloved bird, even from cartoons, such as birds of Engri Berdz. And let's and blind them.
- Skate from blue plasticine 3 large balls and 6 small.
- Big balls are the Bird Taurus. From the small cut down the oblong items in the form of dolls and install them on top of the top.
- With the help of white, black and red plasticine, stick the eyes like in the picture. Place them so that they transfer different emotions.
- From the red material, cut the beaks, and from the black tail.
Birds turned out to be similar to each other, but they have different emotions.
Lapping plants
A variety of flora generates many ideas. For example, you can cut the flower of the lugs, clusters of rowan, chic leaves of palm trees, a magical tree. We offer to make a simple, but all your favorite Christmas tree.
- Green plasticine is blinded by a neat cone.
- As a trunk, take a pointed wand or pencil and put a plasticine blank on it.
- Then make scissors on the cone triangular cuts in a checker order, starting with the crown.
- Each incision slightly adjust. It turned out a beautiful and realistic Christmas tree.
What else can you make?
You can make any crafts from plasticine from plasticine - from toys to the planet Earth. Tell step by step how to do it.
Sweets
Sweets love all the children, they are pushed them out of plasticine with interest. We will tell step by step how to make toy candies on chopsticks.
- Form orange, red, yellow and white balls.
- Take half the orange and white ball, roll out long thin ropes of them.
- Tighten them into the harness, and then carefully roll up the spirals. The first candy is ready.
- Make yellow and white rope, put them next and gently twist the spiral. The second candy is ready.
- Make two large sausages from red and orange plasticine, twist them in the form of a thick harness. Each candy is put on the matches.
Dishes
You can fashion a variety of dishes from clay for the dollhouse. We'll show you how easy it is to make a beautiful dish.
- Roll the ball out of the blue clay.
- Lending his hand to left tortilla.
- Make to mark the round object plate of smaller diameter, forming a ledge.
- 10-12 Roll white balls, manufacture of these tiny cakes and decorate them a side dish.
- Fashion a thin harness and place it around the rim of the product.
Planet
Who are interested can make plasticine solar system with all its planets. We'll step through how to sculpt one of them - the Earth.
- Roll out with a rolling pin bar of green clay into a large thin plate. Looking at the globe, cut a stack of her continents, trying to do their contours as closely as possible. For Antarctica, take a white color.
- The same plate of blue roll bar and stuck to it a plastic ball. Spread the clay on the surface of the ball before the full smoothness.
Looking at the globe, try to correctly lay the ball on the continents.
Insects
Flies, butterflies, beetles and spiders - all these insects, from their huge team we have chosen beautiful dragonfly.
- To the insect turned colorful, produce it from a material with beautiful color stains. To do this, mix red and green clay into a single ball. In the same manner, connect the yellow and orange colors.
- From the first workpiece blind by long sausage - body dragonfly. Since the tail section make incisions as shown in Fig.
- Fashion a yellow-orange 2 large ball and the small wing 2 in the form of long petals. Spend longitudinal stripes, making the relief wings.
- Connect the wings to the body.
- Fashion a round eyes and put on the head of a dragonfly.
Aquarium
Aquarium manufacture with a transparent plastic case on the disc.
- One half of the case cover the blue paper.
- Green plasticine roll thin threads, flatten them and twist the in several places. Fashioned seaweed paste on the blue surface of the aquarium.
- From gray and brown shades, create a clay pebbles and put them on the bottom.
- Now blind by colorful fish. Make three bullocks teardrop shape. Attach them to the eyes, small fins and tails.
- Place the fish in the aquarium.
- Tiny circles clay picture the bubbles coming from each fish.
- Close the lid of the case. Aquarium ready.
Fairy tale characters
Tales of interest to many children, they are happy to mold fervent Chipollino or complicated figure of the hero. We offer blind Bun, this hack possible even for the smallest.
- Fashion a neat ball of yellow clay.
- Make two small white pellets on them Place tiny black mugs. Finished eyes stick to the balloon.
- Rock up the miniature bow and place it in the center of the face.
- Make 10 orange balls, distribute them in the cheek area.
- Stack draw a smiling mouth.
From a dark yellow material, make a potache, and from orange - handles and legs as in the picture.
Fruits and berries
Each fruit is beautiful in its own way. But the banana with the leather, opened halfway look especially attractive. Let's try to portray it in Plasticine.
- Prepare 2 plasticine balls - yellow and white colors.
- Yellow ball rolling into a thick sausage.
- Cut it with a stack cross with one of the sides.
- Bend the skin to the side, opening the fruit.
- Cut from white plasticine sausage and slightly bend it.
- With the help of matches, connect the peel with the fruit.
- Draw a stack of cracks on the peel.
- Semi-walled banana ready.
Vegetables
From vegetable beds, we chose the fruit of a beautiful purple color - eggplant. It is not complicated in manufacturing, it can be sculpted with kids.
- Shot out of purple plasticine oval billet with ends of different thickness.
- Lightly bent it, giving the form of eggplant.
- From the green material, make a flat cake and cut out a sewer in the form of a hexagon. Take a small green tail.
- Attach the cup of the fruit to the narrow fetus side, lower the leaves down. Secure the tail. It turned out an appetizing eggplant.
Guns
Guns, tanks, airplanes are a favorite theme of boys. Tell them how you can cut off plasticine guns.
- From the brown brown, roll the cone-shaped blank, it will be a gun point.
- Take a thin maritus of a dark gray color and wrap it around the blow. Make on the harness beautiful notches.
- Make a detail in the form of thick sausages, seal one end up, the other - down. It turned out a stand.
- Install the blowing on it.
- From dark gray material. Make 2 round cakes. Stack Select the pattern as shown in the picture. Wheels turned out.
- Install the wheels on both sides of the gun. Toy for boys is ready.
House
To make a house from plasticine logs, we will need a small frame for a frame and a little cardboard for the roof.
- The number of logs depends on the height of the box. Roll as many blanks as you need to cover the walls from all sides.
- Attach the logs to the walls of the box.
- Roll the plasticine gray. Bend in half the cardboard to get a batch roof.
- Get the rolled plasticine to the cardboard. On the surface, draw the pattern resembling tiles.
- Install triangular parts over logs on both sides, put the roof on them.
- From blue plasticine, make a square window, highlight the vessels, set the shutters from the pieces of yellow material.
Round window stick to the attic. Install the pipe.
Volcano
We will produce a volcano from plasticine at the time of eruption.
- To do this, a squat cone with an uneven surface is blind from the brown bar.
- At the top with a pencil or chopsticks, make a hole - vulcan zero.
- Take the pellet from white plasticine and take it the top of the cone, depicting the snowy vertex.
- Connect red and yellow plasticine, roll out flavors of them.
- Install them so that it can be seen how Magma is erupting from the vulcan vent.
- According to the cone, draw the longitudinal cracks stack.
- Roll off the sausage of green plasticine and lay it out around the foot of the volcano. Workpiece worry with toothpick, creating the texture of grass or forest.
- It turned out a firewood mountain, so the plasticine volcano looks like.
Heart
Tell how to make a red loving heart with an arrow arrow.
- For this, scarlet plasticine bar cut in half and roll 2 balls.
- Connect them together. Leave the upper part unchanged, and the bottom stretch to get a heart. Align the surface of the product from all sides.
- Skate two sausages, slightly bend and attach to the heart in the form of a handle, highlight the stack of your fingers.
- Make legs, attach them to the bottom of the heart. Ride black balls and put on the legs in the form of shoes.
- Make the heart and spout heart, and just draw a smile.
- Take the match, on the one hand, make a tip from plasticine, and on the other - the pen. Insert the arrow in the hand of a loving heart. Figurine can be given to someone who is expensive.
The sun
Sun is a simple and pretty figure, you can connect to the creativity of kids.
- Take two plasticine bars. Yellow bar ride with a ball, orange - cut down with a longitudinally narrow stripes.
- From the strips to cut long triangles (rays).
- Attach them in a circle to the yellow ball.
- A match for two recesses for the eyes and a strip for mouth.
- Plind and paste the eyes and mouth. Ride a tiny bowl, set in the center of the face.
Beautiful colorful sun ready.
Transformer
The bumblebby robot or any other, capable of transforming, is very attracted by boys. The handicraft consists of many details, it is more suitable for schoolchildren.
- Roll 2 balls from green plasticine. From the little one, make a helmet, inserting a blue plate in it in the form of glass. From the big ball, form the top of the trunk of the robot and connect it with your head.
- Take blue plasticine, cut off the display from it, attach to the breast of the transformer. Add the bottom of the body by making it a figured, as in the figure.
- From six fragments, collect two big legs. Finished limbs attach to the body.
- Go to the manufacture of hands. For two limbs, you will need 6 rectangles of different sizes. Make out of them hands and attach to the robot shoulders.
- With stacks and toothpicks, make stripes and other drawings on the transformer body.
- Decorate the legs and belt of the robot yellow stripes.
- Use ships or matches to fasten all parts.
What to cut out with natural materials?
The most beautiful children's crafts from plasticine are obtained in combination with natural material. Acorn, a bump or a walnut shell can be the basis for any figurine. Work decorated with seashells, cereal, glass, butchers looks richer and rich. We offer to make a plasticine hedgehog, using ordinary seeds instead of needles.
- Prepare a handful of large seeds. Ride brown plasticine ball.
- Take it in one direction to get a drop-like blank.
- With a narrow part of the Taurus, form the muzzle of the hedgehog. Make and attach eyes. Shot a tiny bow and set it on the face of the face.
- On the body, at the head of hedgehog, attach the first row of seeds, a narrow end up. Then a row for nearby install seeds until the entire hedgehog is covered with needles.
- It turned out the animal very similar to a natural forest inhabitant.
About how to make your own hands to make a panda from plasticine, see the next video.