Transparent Hendgam is a good alternative to all the rest of the varieties of smiles. You can buy it in stores toys, but it's even easier to make it yourself. And if you attract a child to this work, it will turn into a fun and interesting occupation, uniting all family members.
How to make the basis?
Transparent lysun is also called mirror, glass or water. Another name of these toys is Clear Slimes. This is a light dragging mass, visually resembling spread glass. You can make such Handgams from glue with brown, liquid soap, salt, starch, toothpaste and other ingredients. Let us dwell on the most effective recipes.
Salt and shampoo
To create a transparent slide, you can use the usual cook salt, which is found in every home, as well as shampoo. We draw attention to the fact that it must be transparent.
Need to prepare:
4 tablespoons shampoo;
Salt - added as needed;
Cup and spoon for kneading slide.
To prepare the slide, the shampoo is poured into the cup and gradually, the salt is added to a pinch, constantly stirring. After the salt absorbs all moisture, the slide begins to thicken - at this point you should carefully knead the mass with your hands and remove into the refrigerator. Aventer a quarter of an hour Lizun is ready.
If the slide is too hard to stick to the hands, add some liquid to it for lenses.
Keep in mind - the process of manufacturing the slide on this recipe occurs extremely slow. Only a stubborn continuous stirring with the addition of salt leads to the formation of gel-like consistency. However, you should not overdo it with salt. Otherwise, the mass will be solid, and then all the work will have to start first.
From Stachmala
To make a transparent lysuine, you need to mix liquid starch and stationery glue in a ratio of 1 to 2. Cooking formulation is simple: glue is poured into the bowl and stirred with starch to density. After that, you need to carefully knead the prepared mass for 10-15 minutes. Immediately after the preparation of such lizun inside the substance there will be many air bubbles. However, after a couple of days later they will disappear.
From toothpaste and shampoo
Transparent slimmes are often made without thickeners. To do this, 30 ml of any colorless shampoo should be poured into the container (it is desirable to take thick), then add a toothpaste of white. It should be about 3-4 times less than shampoo. The resulting mass is smeared, kneading with their hands, after which they are placed in the refrigerator for 2-3 hours. This time is enough for the toy to have gained tight.
From the bora and glue
The most common technique was obtained by the preparation of Clear Slide Slide and Sodium Tetraborate. The combination of components gives the mass of viscosity and elasticity. However, not every type of glue is suitable. Many slides at home use PVA. But it gives a finished product of a matte tone, to get a transparent lysoon based on it will be very difficult. Therefore, it is better to give preference to the stationery (silicate) glue, it is called "liquid glass". Such a name is quite justified, since the basis of this substance is an alkaline solution of vitreous silicates. Berlingo and Eric Krause are best proven.
The glue "Titan" has similar characteristics, which was widely used in construction. Its main component is a silicate solution of potassium and sodium. However, "Titan" contains toxic components and gives a sharp chemical smell, so it is undesirable for children's creativity. Adults can work with this glue without fears, but necessarily in a ventilated room.
To obtain transparent lysons, glue is mixed with sodium tetraboret, which is a boric acid salt in a mixture with polysaccharides. The substance is non-toxic, but when eating a large amount, digestive system dysfunction may appear. Therefore, children must fulfill all the work under the control of adults.
To create lysuine, you can use a solution of boos in glycerin or borax powder. The preparation is bred in warm water at the rate of 1 tbsp. l. Thickener at 0.5 glasses of water.
In a separate container, 100 g of adhesive is stirred with 5-10 ml of heated water. Both parts are stirred so that there are no lumps. After that, the boor with small doses, almost drops, are poured into a glue solution with constant stirring. When the mass reaches the necessary density, it needs to be thoroughly kneaded. The finished toy should not stick to the hands.
Lizunov recipes with different designs
There is a lot of ideas how to decorate transparent lysunov. To create a spectacular design, balls from foam, sequins, beads, as well as food dyes are used. If you wish, you can make even edible slim - the kids are very fun to play with such toys. In addition, they are made exclusively from natural ingredients, so they are completely safe for child health. However, it is important for the game to make sure that the baby has no allergies to the basic components of the base and additives.
With sparkles
Very beautiful and elegant handgam can be obtained if you add a little glitter to the base. Such a lysun is obtained transparent and brilliant, reminding the New Year's toy. To create it, you will need 50 ml of glue, 150 kg of starch, any packaging of the glitter of the resulting colors, food film, as well as a bowl and tools for work.
The glue must be mixed with starch, knead up to a homogeneous state and leave for 5-10 minutes. After that, on a table or any other horizontal surface, they lay the food film, lay on it the hard mass and melted 10-20 minutes. When the mass stop sticking to hand, the toy is ready.
With fruits
Greately popular with transparent slimmes with fruit flavors. It is possible to achieve such an effect by introducing special fillers into the adhesive mass, which in their own way resembles berries and slices of fruit.
The fruit flavor is characterized by a juicy sweet aroma, fully repeating the smell of real fruits. The recipe itself fully corresponds to the manufacture of rhums for hands with glitters, only have to replace the glitter on the attractant.
With balls
To get a transparent crunchy slim, a foam and shaving foam foam is added to it. The combination of these components gives the volume toy and emphasizes the air texture. Thanks to this, air bubbles appear in the mass, when pressed, they burst and publish crunch.
The main component of such a slide becomes foam balls. You can buy them at any store for needlework, there they are offered in a wide range on any color and size. Selecting the filler, keep in mind that the texture, density and characteristic crunch of the product will largely depend on it.
If you do not have the opportunities to buy ready-made balls, they can be made independently. To do this, you just need to take a piece of foam and disassemble it into separate items. If you want to get a color decor, lower the balls into the aqueous solution of the dye, and then dry.
For the manufacture of slots with foaming, PVA glue, shaving foam, and an activator. Foam can be used any, the main thing is that it is air and thick. To create unusual lysunov, you will need 8 ml of silicate glue, a glass of razor foam, 3 tbsp. l. Shampoo or liquid soap, as well as foam blanks. A boome is used as a thickener.
The glue is squeezed out of the bottle in the bowl, and the shampoo is added to it. If the mixture is heavily thick, it can be diluted with a small amount of water. A razor foam is added to the solution and stirred carefully to get a homogeneous consistency. To achieve elasticity and optimal thickness, the sodium tetrabrate is added to the base, continuing to stir the wooden stick. As soon as the mixture begins thick, foam balls are introduced into it. The toy is almost ready, it will only be left to take the slide and another 10-15 minutes to knead his hands.
The finished slide must be stored in a sealed zip-pack or a closed jar in the refrigerator. Every 2-3 days should be taken to refresh and smash.
Rainbow slot
In order to make a rainbow slider, you will need a few cups. They are in equal volumes of glue, dissolved in water and introduced food dyes - red, purple, blue, green or yellow. Then, a solution of a tetraborate is introduced into each tank of a thin flowing and actively stored.
When the mass in all bowls thickens, you need to connect lysunov and knead your hands well. Very soon the slide will shine with all the colors of the rainbow. We draw attention to the fact that if you connect the compositions before they become thick, the shades are mixed, and the slide will be dirty brown.
How to change the toy?
If you picked up all the ingredients in accordance with the recipe, and the lysun nevertheless turned out to be muddy, most likely, you made some inaccuracies in its manufacture.
One of the most common causes is insufficient stirring. Such a lysun is heterogeneous.
In this case, there is a simple rule: the longer you will wash the mass, the better, plastic and more transparent it will work out.
If the slider turned out to be too sticky and drum, it means that when preparing a transparent lysoon, you added too little starch. Enter a little more, and the situation will improve.
If Lizun turned out to be slippery, most likely, it lacks the thickener - in this case, flour or boor are added. Add these components, wash the ground again, and remove per hour or two to the refrigerator. Usually after this its quality is significantly improved.
The second life of your lizen can give ordinary glue. To soften too thick slim, it is enough just to add a few drops of the stationery glue into a transparent mass and knead it again. The toy will be fine.
Lizun becomes hard and unnecessarily dense if playing with him more than one and a half hours. But if you add a little saline solution to it, then he will again gain his elasticity. In the glass of warm water, they dissolve the teaspoon of salt, stirred, they lower the lysen there and remove into a cool place for 2-3 hours. After this time, the slide takes and carefully kneading their hands.
Usually, Lizuun's life is 3-4 weeks. For the purchase product, the operating period may be a little longer, for homemade - a little less. In any case, it is necessary to store it in a hermetic packaging in a place protected from direct sunlight.
Make it with their own hands of transparent lysun dreams every slider, because it is precisely such hand feeders are considered the most difficult in execution. However, if you choose quality components and comply with the recipe, you can create a great anti-stress with your own hands. Try to stick to the rules of storage and resuscitation of the slide, and he, without any doubt, will delight you not one week.
How to make a transparent slide, look in the video below.