Today, the automatic washing machine is almost any urban resident. This is a convenient assistant for both women and for a man. During the crisis, it is very important that the washing machine will serve as longer as possible, because prices for new equipment in stores bite. What events need to be performed for this - consider in this article.
Causes of pollution
The main reason for pollution, experts call water. It's no secret that in its physical indicators it is tough. Its composition may contain elements that in the wash process are laid inside the washing machine. This leads to premature spleens of the product.
But the things themselves, or rather, their particles can harm. With large revolutions during washing, the material is degraded, its fibers, almost invisible to the eye, settle in filter lattices, there are scoring, due to which water can not be easily leaving.
If you do not make preventive measures, such as the cleaning of the tray and processing rubberized parts, then this leads to different troubles, one of which is an unpleasant smell.
When using cheap and low-quality washing powders, the drum can be contacted because it remains white colors. By the way, this The soap raid can start rotting - and this is again the source of an unpleasant smell.
In this regard, three types of contaminants can be distinguished with which automatic washing machine faces:
- Skip. This also includes a lime flare. Two these attacks happen due to the low quality of running water and salts of such trace elements, like calcium and magnesium. Skip negatively affects the work of the product, contributes to an increase in power consumption. If you do not look into the washing machine for a long time, it will be possible to say goodbye to it. Household chemicals and folk remedies are coping with these challenges.
- Mold. Dirt and a small garbage are clogged into the inner parts of the washing machine, therefore there is an unpleasant smell and minor breakdowns.
- Pollution of the case, including the glass door. Cleaning the pollution of plastic or glass will help detergents.
What can wash?
As noted earlier, wash the washing machine from the inside and can be found in household chemicals or folk remedies. In any economic store you can find a special series of detergents for automatic machines. They differ in price and in composition.
White you need to enjoy great care. This is a strong chlorine-based chemical reagent, which can negatively affect the product.
If according to the instructions, the manufacturer categorically prohibits the use of chlorine-based bleach, then it follows that the drum of the washing machine and the tube are made of fragile components.
Soda can be expensive to get rid of mold. Mold usually appears on the drum and in the tray where the washing powder is covered. There are often cases of mold under a rubber band, which is located in the area of fitting the glass door.
Expandment the machine helps the machine helps lemon acid . A sachet with an acid, unlike household chemicals, always be at hand at any hostess. Provided that lemon acid is clean and household electric kettles from scale, it can be concluded that it is safe for human health.
From black mold can be used vinegar . But at the same time, it should be remembered that the acetic essence has a specific smell that can not be disrupted for a long time, the smell can remain on things.
Drop the car from mold able Copper Kuner . It can be found in any garden shop. This blue dull powder is treated trees and shrubs each spring and autumn from fungal diseases.
Remove dirt from the plastic case using soap solution. To do this, it is enough to take the soap soap and grate it. The resulting kneadings are flooded with warm water.
Wash inside
Almost any automatic washing machine has weak points that are most often polluted. This is caused by the technical features of the product. But household chemicals, with the help of which washing, can have a negative effect. The most "suffering" places include.Sealing rubber
At one fine moment, households may feel the specific smell, something resembling a swamp. So smells the black mold, which is formed if the hostess erases its belongings at a small temperature, as a rule, About 40 degrees and below.
If the heating process does not occur, then the microorganisms do not die, which means that the disputes of mushrooms and the microbes are not visible to the "occupy" free spaces. One of these places is a sealing gum.
Place, something like mucus, settles in rubber. And if you also tightly close the glass door, thereby venturing the drum - then this is the most favorable medium for mold.
If the fallout is invisible without a magnifying glass, then it does not follow from this that there is no mold. In order to accurately answer this question, it is enough to take a clean cloth or a napkin and walk along the inner wall of the seal, There should be nothing suspicious on the material.
Suppose that the black bloom has already been formed, but maybe he still does not make himself felt - there is no sharp unpleasant odor. In this case, it is necessary to prepare a cleaning agent - It can be household chemicals or folk remedies.
Rubber in the drum can be effectively cleaned with such advertised and known means as "whiteness" and domestos or any other cleaner for plumbing, which contains chlorine. To do this, you need to use the instructions and an ordinary toothbrush. Apply the chemical agent to the rubber gasket, it will only stay with a brush clock or counterclockwise. In the launched cases will have "Speak" the rubberized part in Chlorine, After that, wait for a while, until the stains disappear. Usually, this procedure takes up to two hours. If there are no houses of these funds, the hostess is recommended from the folk remedies or soda.
Copper cunery is sold in stores in 100 grams packs. In a small container, 1/3 of Packing with Fungicide and four glasses of water are poured. Powder must completely dissolve in water. The rubberized parts of the automatic washing machine are processed with a solution.
Experts recommend leaving the machine-machine after treatment alone, and after a day, check the result. After the expiration of the term, it is enough to run the car in a fast one once, and the remains of the chemical themselves will disappear from the walls of the household appliances.
The soda is divorced in a special container. To do this, water is poured into it in the amount of 125 ml and the soda is sufficient. If we translate into a well-known language, then it is about half a glass. The resulting consistency is processed by the seal, the sweeping of the substance is carried out in rinsing mode.
By the way, laundering at home the car can be used to remove the varnish. The main thing, remember that the remains of chemicals need to be thoroughly rinsed and dry dry.
Powder tray
A powder tray, or, as it is also called the masters, - the bunker for the dispenser, periodically also pollutes. First of all, mold can be formed in it. After all, it is from this compartment of water that sheeps powder, and therefore Humidity in this place is increased. And for moldful mushrooms of other happiness and do not need.
Do not shift responsibility for someone else, unfortunately, the household themselves are to blame for the appearance of mold. Indeed, for the appearance, the fungus is enough just certain circumstances, such as cold wash, neglect whitening components, incorrect rinsing and dampness.
Almost anyone in at least once in life was erased at a low temperature short period. This allows you to finish washing in a short time and do your own business. I do not know whether people do not start the disinfecting mode.
Remember that mold perishes only when washing over 60 degrees.
In cheap powders there may be no necessary components, including whitening particles. They act pointfully on things, and on fungal colonies. The desire to save, of course, is understandable, but if you use the usual powder, and not universal, then you need to buy a special tool, in this case the money does not always benefit. Otherwise, cleaning the tray and other details from mold will have.
It is very important not to forget that When using the rinse, you need to include a special mode. Without this, the conditioner for linen remains on the details of the automatic washing machine in the form of a non-washed mucus. And if you still do not rub the tray after that, then mold is guaranteed.
Mold is not just a dirt that adhered to the seal, tray or to drum. If there are allergies or small children in the family, then this attack may adversely affect their health. After all, the mold can not be noticed and periodically go to the hospital. Allergies are still flowers, and if it is not treated, you can "achieve" the diseases of the respiratory tract or throat, weaken immunity.
Remember, if the smell has already appeared, then it will be transferred with things when washing. With some of them they will have to say goodbye, so do not run, it is better to start fighting fungal colonies in advance.
If the machine is not a "pre-age" machine, then you can try to pour into the bunker for cleaning Vinegar and soda in proportions 2: 1 . On Polkylogram of Soda will need near liter of vinegar. It will remain run by idle washing, but remember that it can negatively affect the typewriter and its details.
Knowing the reasons for which the mold appears, it is necessary to act comprehensively, and then the result will be 100%. From gentle ways you can offer to pour a bottle of white in the tray, set the maximum temperature and launch a long wash. After half the wash passes, the machine machine must be stopped. Rest should last about two hours. Then you need to continue washing.
Before rinse, you need to pour into the tray of the floor-liter of acetic essence and finish the started. After all the procedures, it remains to handle all the visible details of the washing machine with a dry cloth. Carrying occurs when the glass door is open. Specialists are recommended at least two days to keep it open, But many it is in habit and they no longer close it.
This procedure should be enough for mold leaves a surround place. If you follow prophylactic advice, then it will no longer let yourself know.
Cuff
If the mold is not visible under the cuff, but there is already a smell, lemon acid helps in getting rid of the marsh smell. To wash it preferably at least twice a year. To do this, it is necessary to thoroughly rinse and dry the dispenser bunker. If we take into account that usually in a lemon acid package about 30 grams, then it will be necessary to pour out Seven bundles. You need to set the maximum temperature and the longest washing mode. After completion, it should be dried and ventilated.
If the fungus has already appeared in the form of black spots, you can use soda. The recipe for its breeding has already been presented earlier, not only seals, but also tray, and drum can be processed.
By the way, the substances included in the composition of soda are able to "muffle" all sorts of smells.
Unfortunately, not always folk remedies help clean the details of the automatic washing machine. In order to save it, you can use the toilet detergent. It's no secret that the same substances are usually the same substances in household chemicals, they differ only in dyes and fragrances. And from this it follows that it is impractical to spend your blood.
It is not necessary to wash this tool, it is enough to put the substance with a sponge for washing dishes to the places where fungal colonies are expected. Do not forget about personal protective equipment - gloves and respirators. The active substance will cope with the task for ten minutes. After that, you need to remove the residues of the substance and run idle. To secure the result, do not forget to turn on the rinse. remember, that Food soda can dissolve the remaining particles of an aggressive cleaning agent.
Drain pump
It would seem that the automatic washing machine was specifically designed to clean the things from pollution, and at the same time it is necessary to periodically clean. Often during the washing mistress face such a situation that water at the right moment is not merged. A suspicious sound is heard, which is unavigated by a machine machine. These are the first signs that indicate that the drain pump either clogged, or broke.
Cleaning the drain pump is performed using a wrench and screwdrivers. It is not necessary to be afraid, because it will not be carried out as such a repair, the thing is that the pump is inside the washing machine, so it is necessary to get to it.
Depending on the manufacturer and from the model, the drain pump can be located in a non-standard location, so before cleaning the instruction attached to the washing machine should be studied.
In most cases, this item is located at the bottom of the product. It protects it or a small door, or a special pad that can be opened using a conventional screwdriver. The door opens with simple lowering, lifting or turning, it depends on the model.
The detail holds on a self-tapping screw, "free" it can, twisting the methis. To do this, use the cross screwdriver. remember, that Saws can be rusted, and therefore, it needs to be twisted carefully, so as not to thread the thread.
Very important at this moment Sit under the washing machine unnecessary rags , towels or sheets and prepare a special water tank. It is desirable that it be widespread, not high. What material it will be produced from plastic, metal or glass - no matter.
Machine machine must be tilt and substitute to the container. It is better to produce this operation together, the second person at that time should unscrew the lid. Copying water should be easily reached out.
Setting the washing machine on the side, in the same way, we unscrew the pump directly. Then unscrew the wires and remove the holders with tubes.
Now you can clean the plums from the crowding. With this task, any household chemicals can cope. From cheap tools, you can recommend a soap solution, it is prepared from the household soap, or rather, from the washers. They are poured with water. Apply the cleaning agent to the rag, the sump is neatly sulfice.
In some models of washing machines, access to the drain pump is difficult. First of all, you will need to pull out the tray, the self-sufficiency will appear to be unscrewed. After that, the lower part is removed and the next self-sufficiency is turned off. This will free up the panel to be removed. Under it will be located remaining self-sufficiency. Further actions will be aimed at dismantling the clamp and cuffs. After passing all these stages, it will be possible to remove the facial part of the case, and already under it there will be a compartment with a drain pump.
There are washing machines, a drain pump from which is located in the rear. So, you should remove the drain hose and unscrew the back cover. Such products also have to turn off the terminals. The drain pump is unscrewed by an ordinary wrench, It will only remain disconnecting the tubes and make cleaning.
They clean the impeller directly - the part that resembles a fan something. The part is reliably protected by two halves of the housing, which are fixed with a self-drawing among themselves, and they are still to be unscrewed. After that, access to the impeller will appear. It can be wound on hair, pet wool. Frequent cases of winding synthetic or natural yarns. All these excess needs to be carefully removed, no need to forget about cleaning snail.
Now it is necessary to install the pump to the previous place and connect the item according to the instructions. If everything is done correctly, there will be no extraneous noises. Water will naturally go out into the sewer. Otherwise, you need to replace the drain pump.
The drain pump is clogged under the action of rigid water, with the use of non-recommended household chemicals, hair and wool's wool.
To avoid breakdowns, replace the washing powder and perform regular filter cleaning. In addition, you can use a special grid for washing things, install additional filters for water purification.
Luke
Divorces or various contaminants can remain on the glass door of the automatic washing machine. And if you consider the fact that the machine machine can be installed in the kitchen, then the hatch is the facade. And this facade part, of course, should always be clean.
To clean the glass part and plastic frame, it suffices to use non-aggressive cleaning agents. Soft household chemicals in a small amount applied to a clean cloth.
If according to the instructions, the manufacturer recommends dilute concentrate before use - you should use this advice. Apply the cleaning agent for pollution, it is enough to remove the residues of chemistry with a clean cloth. The product will shine like a new one.
With regards to the remaining parts, their cleaning occurs in most cases automatically. It is enough to add to the water intake, mentioned earlier detergents and cleaning products and run idling. Water, falling into a cuvette, will distribute - in the good sense of the word, all cleaning agents for all parts. And all the garbage and pollution will go straight into the pipe.
Vertical drum
The vertical washing machine, like the horizontal machine-machine, is "infected" by the same "diseases". On the heating element can be formed, and If you do not ventilate the car inside, the mold appears and the unpleasant smell.
In order to clean all the details immediately and cope with all the "diseases", it will take to pour half liters of acetic essence into water. Temperature regime should be maximum. Within a few minutes, water completely moves vinegar, after which it will be necessary to add several tablespoons with soda. There are enough three spoons without a slide. Alkali with acid will enter the reaction. So that the process is safely completed, turn off the washing machine. Usually at this stage goes about an hour.
In order not to waste time is wasted while the insides are cleansing, you can clean the product and outside. To do this, combine water with vinegar in equal proportions and to treat plastic to this solution. We certainly need to process and tray.
After an hour, it is necessary to resume washing, wait for the drain of water and a cloth or a sponge dry wipe the washing machine from the inside.
Eliminating the smell
First of all, you need to understand that there may be several reasons for smell. An unpleasant smell can be formed from mold, blockage or contamination. Often there are cases when the smell appeared From the stagnation of water and remnants of the washing powder.
But before performing cleansing events, you need to carefully examine the sewage system. It may well be that the unpleasant smell comes from the pipes, and not from the washing machine. Confirm or refute this hypothesis can smell from shells and washes, if it is not - then the case in the car.
Mold smells of dampness, and vice versa. In the washing machine, almost all parts are washed with water, and if there is no drainage, it appears a favorable medium for breeding bacteria and mold mushrooms. Erasing at least once a week, dirt and residues of powder get mold as food. Mushrooms are populated with a powder bunker, a drum, a seal, pump and draining.
To get rid of the colony of mushrooms, it is enough to extend the car to be frightened using whiteness or taking advantage of folk tips.
If there was clogging of waste, then the smell of sewage will be necessary. Dirt, particles of things, powder residues, gathering together, begin to fuck. Otherwise, they contribute to the occurrence of water. To get rid of this smell, you will need Cleaning hoses either mechanically or with the help of household chemicals.
Often, tissue particles, dirt and detergents remain on the drum itself. After the next washing, they interact with water, and if at the same time closing a tightly glass door, then the rotation process will begin. After some time, the smell will appear. If households practice storing dirty things in a washing machine, then this smell will automatically go to clothing. Get rid of it will be difficult.
In preventive purposes, it is necessary to process the drum with cleaning agents, and after each washing, leave the door slightly ajar. The ventilation will lock and things, and the product itself.
An unpleasant smell can appear only at the moment of water drain. This suggests that clogging has affected either a drain filter or a drain hose. Dirt, pile, mucus from powder - all this is settled on the walls of the hose and in the filter compartments. In order to prevent specialists recommend At least twice a year to clean these details.
The reasons of the unpleasant smell may be not only breakage, but also poor-quality washing powder. Cheap means spoil the heating element, leaving behind the scale, and various parts are a seal, a tray for a powder or drum. On the auxiliary items, they settled in the form of a plaque. This flaw accumulates and becomes a favorable medium for microorganisms and mushrooms. And they, in turn, begin to "eat" these residues, as a result of which an unpleasant smell occurs. You need to select the washing powder and air conditioning until the optimal option is found, which will not lead to the release of odors and will afford the consumer.
Remember that the tray must be carefully wit and dried. If this is not done, then the mold will not wait long for a long time. And with it there will be an unpleasant smell. In running cases, this may result in a complete replacement of the part.
If the mold has already appeared in the tray, with a lot of probability, she began its spread and deep into. It is necessary to push the tray and check if there is mold in the feed channel. If this is not done, the smell will not disappear anywhere. To cleanse the channel, it may be necessary to vanutuz or the rash.
All models of automatic washing machines are equipped with a protective filter. It is designed to filter water during draining into the sewer. It is not surprising that the item, taking all the pollution on itself, may eventually fail.
To this not happen, it is necessary to periodically check the filter, clean it or replace it with a new one. If this is not done, the water will begin to be stated, so that a foreign smell will appear.
The hose at the washing machine can be clogged as the corrugation of the sink. At its wall attached dirt, powder residues, mucus - a beautiful medium for reproduction of microorganisms. This leads to the emergence of unpleasant flavors. Periodic Washing Freshly Could Remmit Situation If this does not happen, then you will have to replace the drain hose.
We whiten the yellowed plastic
There are often cases when plastic turns yellow under the action of dust and dirt particles. It is very important that pollution does not start interact with the plastic case. In this case, it can be removed using household chemicals and a sponge. But if plastic is cheap, then mechanical actions with its surface can lead to deep scratches.
You can clean the washing machine using ethyl or methyl alcohol. But remember that methyl is a poison that is able to deal with even an adult healthy man. Therefore, the process should be carried out in the means of protection, and the room is ventilated.
Experts are recommended to produce test cleaning - a solution is applied to less noticeable locations, and if the result satisfies, then cleaning can be continued.
In stores for the sale of household appliances you can find special napkins. They are in their composition whitening components. And in stores where automotive components are sold, you can find special sprays. If you buy a cleaner, then they can not only cleaner, but also apply a protective layer.
Acetone is treated with yellowed plastic in the most running cases. In addition to the fact that acetone has an unpleasant smell, he also can spoil the appearance of household appliances. This tool is enough in a small amount of apply to a cotton disk and conduct test cleaning. When a satisfactory result is achieved, the entire surface should be cleaned.
In construction stores you can find self-adhesive White Wallpaper Usually, they restore the surface of plastic window sills, but also for washing machines, they can be used.
Another way to get rid of yellowness is Paint in the cans. But it should be applied to the last place, since the likelihood of paint particles in the inside of the washing machine, which ultimately can lead to a breakdown of household appliances.
Prevention and recommendations
Do not forget to wipe the internal parts of the machine machine after each wash. First of all, the seal, because it is black mold that appears. Powder particles and dirt may remain on the drum, which ultimately contribute to the emergence of an unpleasant odor.
The tray for the dispenser must be succeeded and carefully treated with detergents. The glass door must be open at least two days. - The ventilation eliminates the likelihood of amber.
The drum ideally should be empty. remember, that Store dirty things in it undesirable After washing, it is necessary to free the washing machine from things as soon as possible and give it to dry.
Add washing powder and rinse needed according to the instructions, the option "more is better" in this case does not work. Excess powder is not washed away, but settles on the walls of the product.
At least once in two months, it is necessary to launch a single wash, and the run using citric acid is twice a year. This contributes to the cleansing of the washing machine not only from scale, but also from mold mushrooms.
Observing these simple recommendations, the washing machine will serve faithfully for more than one year.
About how to clean the washing machine from mold, see the next video.