The main advantage of the self-made wooden bread box is the long-term storage of bread in it, which remains fresh and soft. But also this is an original decorative object of considerable, capable of becoming an interior decoration. Such utensils, of course, can be purchased, but in the presence of elementary knowledge from the area of the joinery, you can create a truly unique thing.
Required preparations
Before starting work, you should think about what form and size will be the thing from which material to do it. Before, since families were big, the masters created big babes for storing bread, but today less dimensions are required.
Adopted forms of the product:
- rectangular, square tank with doors;
- cover closed by a lid;
- Open dish with a fully opening lid, despite the fact that the base can be used as a cutting board.
The door does not have to be simple - it can be flexible and remind of blinds.
It is possible to decorate the subject with the help of drawing with coloring compositions, decoupage techniques, by burning and thread, after which the outer side of the product is covered by a protective layer of special food varnish or a verse.
As for the materials, it can be wood, plywood, berst, bamboo. The craftsmen create their masterpieces even from cardboard, cotton fabric, clay, newspapers, plastic bottles. Breadmakers made of wood and berers found the greatest spread, and small wicker bobes from the vine are popular with popularity.
Stopping your choice on one type of product, It is necessary to draw a diagram based on sizes and preliminary drawings. . At the same time it is necessary to repel from the amount of bread and the size of the loaf (Batonov), which will be placed in the bread. It is important that the contents fit freely inside. It is allowed to create drawings immediately on a tree or other material.
Production of wood materials
Bulk at home is often made from plywood, bamboo, barks and natural wood. This is explained by their preferential characteristics, such as breathability and regulation of humidity inside the design.
The wooden product should not be made of coniferous woods, distinguished by a pronounced smell interrupting the flavor of bread. The best varieties for creating a crib - ash, birch or linden.
The product is plywood
To work, you will need a presser carpentry line, clamps, a jigsaw, a hand milling machine, emery.
- At the first stage, it is necessary to cut all the details in accordance with the drawing, best, the pubescom. In stock There should be the following billets - the bottom, two sidewalls, top, rear wall, doors.
- Next, you need to make all the elements using screws, screws, glue, or by connecting the "groove-crest" compound, forming the removal and spikes in the plywood parts.
- Shakes for reliability are processed with carpentry glue.
- If the door-curtain is conceived, it is made from the rails, at the end, the groove inside the bread box for it is additionally done.
- The door on the loop is mounted with the front side of the product.
- After that, you need to carefully polish the subject. Patterned view of the kitchen attribute can be decorated with lace carvings or apply paint pattern.
In the side and rear walls, the product make small ventilation holes that allow bread to breathe.
The bread box made of wood is manufactured in the same way, only boards or parts of a wooden sheet are used as a material, according to which the parts are cut out, parts are cut. Such a design may differ with a folding lid, the presence of an inner shelf or division into a section.
Features of bamboo bread beds
The original thing can be created from bamboo rugs, and if small dimensions are needed - from napkins, moreover, work will take only a few hours.
For the manufacture you need to prepare cardboard, scissors, self-adhesive tape, a piece of fabric, a pencil for creating an outline, a beautiful souvenir handle is also necessary for the shutter doors. The size will depend on the parameters of the napkin.
- First, the housing is made from the thick sheet of cardboard.
- So that the door closes tightly, the side walls are spinning on one side.
- All elements are connected using glue.
- From the inside and outside the cardboard is covered with a self-adhesive film that gives it strength.
The final stage consists in finishing the bamboo. If the napkin is big, it is enough on the bottom and door.
Barriest box
A product is created from the top layer of the linden or birch bark, but you can make it possible to make a finished material selling in stores for creativity.
Procedure of work.
- It will take 24 tapes of Berestov, which are placed horizontally and vertical (12 pieces of 20 mm wide). Of them weave the rug, which will be a deep part of the box.
- We should weave the cover so that its height is a resolution and a half diagonal from skies, which are 0.5 mm wider than those used for base.
- The edges of the product are fixed with a stainless steel wire.
The advantages of Berriest are a soft bread that is not affected by the fungus and mold, besides, the product does not lose weight over time.
Breadmakes from girlfriend
An interesting option is to create a plastic bottle and paper bread. As the basis, the capacity of 5 liters is suitable.
Production Stages:
- The bottle is cut into two identical parts along the neck, and the sidewalls are cut out of the bottom;
- take newspapers or unnecessary paper, and tear into small pieces;
- Then you need to deceive the plastic Vaseline, and on top to apply prepared paper parts;
- PVA glue is applied to the first newspaper layer, and it is better to make paper on it, it is best to make 5-6 layers, after which the form is left for final drying, usually takes several days;
- As a result, the solidified form is removed from the plastic basis;
- To create a stand, you can use a deep saucer and make it the same procedure with it as with the parts of the bottle.
All elements of the future bread mines are bonded with a sticky tape, and the stand is glued through a thermal oil. It remains to glue the design by conventional napkins, and then paint acrylic paint. However, the decor can be chosen as you like.
Also, the opening bread can be made with their own hands from cotton and even the finished knitted canvas, which is soaked in starch water before manufacture. The main task is to create a dense internal base from cardboard, which will serve as a frame for a soft material.
- To do this, take a square sheet of cardboard with sides of 27 cm and a cotton facility by 1.5 cm. A ruler will also need, a piece of chalk for marking, braid, pins, adhesive tape and iron.
- Two cuts of fabric are stitched from three sides, then the resulting bag must be turned out the outward front surface and insert cardboard into it, after which it is completely flashing.
- Inside it, the square is drawn the square, stitch it, and, connecting the angles with the help of the pin, get a similar dish. Inside, you can put a beautiful paper napkin, and the sides decorate the bows of the braid.
Cute bread tray, if desired, can be made rectangular and round, and use for this a variety of material, including wool and linen blanks.
Some masters are able to create a kitchen facilities even from simple paper, folding sheets into dense tubes, which are then connected by glue and intertwined. Of these billets, bizarre cribs are obtained, which are first covered with a primer mixture, and then paint. And they are no less valuable than crafts, fully swept from the whole piece of wood.
The product created by the product, whatever difficulty it, if done with the soul, will always please their original view and inspire craftsman for further creativity.
In this video you will learn how to make a breadboard.