Deciding to supplement the kitchen headset with a bottle, the buyer is often asked about the size of the required Penal. The material of this article will be useful to those who do not know what are the dimensions of the cargo, and will tell you what to consider when choosing your option.
What it is?
The bottleneck is nothing but the storage facments of various items used in the kitchen. In fact, it is a roll-up or pull-out box-racks (often with a closer), which are embedded in modules of kitchen heads or have between them, and then they are mounted in the free seats of the kitchen. Based on the design features, the models can have a different amount of shelves, the storage systems are not only horizontal, but also vertical.
Fasten these products between mounted boxes headset or they can be outdoor. In addition, individual modifications are installed on the floor from one of the sides of the headset.
Standard dimensions
The main parameter of the bottle is its width: in comparison with conventional baskets of the type of type, it is only 10 cm or 100 mm. 10 cm is the narrowest width: it is not enough to fit inside the dishes or any large items, but it is enough to store small bottles with spices and spices. The height of such a product is comparable to the headset height, which is built into the pencil. Typically, these indicators are 80-85 cm.
In addition to 10 centimeter models, the dimensions are considered to be bottled with a database width of 15 and 20 cm. The wall thickness of the product varies from 1.6 to 1.9 cm. Thus, the internal width decreases in a total of 3.2-3.8 cm. Sometimes the inner width of the extended polar stake is only 8.6 cm. The entire kit is installed in A single box can have a different amount of divisors (from 2 to 4).
The height of small cargo usually does not exceed 50 cm with a width of the box itself 10-15 cm. Outdoor models with legs have a height, on average equal to 720 mm. The height of the shelves of the cargo is rarely identical. Usually one of them is higher, which is good for placing bottles with vinegar, beverage, vegetable oil.
Usually manufacturers make shelves with a height up to 38-40 cm. The lower compartments often have a height of about 15-20 cm. However, depending on the structural nuances of the base itself, they can change. For example, some shelves have a height of only 9 cm, in other models it can be 12 cm. Sometimes the distance between the bottoms of the upper and lower shelves is 50-53 cm. At the same time, the upper shelves can be calculated on low storage items unlike the lower compartments.
The depth of the cargo box, regardless of the number of rows with the shelves and containers, will be equal to the depth of the headset. On average, it can be 49-50 cm. However, the depth and height of the internal design with the opening and closing mechanisms without the facade is less.
Buying this or that product, it is necessary to consider: the manufacturer indicates the size of the box, the internal dimensions will be different. They must be viewed in the characteristics attached to the description.
The inner filling, based on the size of the boxes themselves, the headset can be 111x470x460 mm, 112x496x477 mm. Minimum installation depth - 394, 494, 460, 294 mm. Buying, for example, the product with a total depth of 48 cm is worth considering: the depth of the retractable panel will be approximately 44 cm. The same rule is typical and models with a width of 15, 20 cm, up to 84-85 cm high, with a depth of up to 60 cm.
Non-standard options
This line includes models of bottled bottles for the kitchen with a base width of more than 200 mm. They are distinguished by a large load capacity, in addition, the wider and more cargo, the more stable. However, these models have the width of the facade and the width of the internal stuffing. For example, if the width of the box is:
- 300 mm, the width of the cargo will be 264 mm;
- 350 mm, then the bottle will be less than 6 cm and will be 314 mm;
- 400 mm, the parameters of the internal filling will be 364 mm;
- 450 mm, the design of the Penal will be in a width of 414 mm.
The depth of wide models can be 460 and 510 mm. The carrying capacity of these products is 25 kg, it is usually 2 times less in narrow analogs. These modifications have a significant plus in comparison with narrow structures: they are more stable. The narrow has to be filled completely, because when extending the filled-filled phenyl, it begins to fall.
Choosing, for example, an option with a height of 720 mm, it is worth considering that inside the filling will be much smaller in height. This is necessary to accommodate fastening systems and comfortable extension, as well as closures. For example, at this height, the inner frame of the bottle will have a height of about 60 cm. If this parameter is greater, it will not be possible to store on the upper shelf any items.
For non-standard type options, the so-called column cabinets can be attributed. These bottles usually have a frame height within 1600-1800 mm with a bundle width 150 and 200 mm. As a rule, these are multi-level models with a height, equal to the height of the refrigerator, because they set them next to it. Usually such models have an internal filling of five rows with shelves or vertical storage systems that are designed for pan and fluttering.
Besides, There are modifications with dimensions of 1690, 1720 mm . Their depth is usually about 46 and 51 cm. Also in store rules you can find columns with parameters 1830x106x460 mm, 1830x349x448, 2250x249x448 mm. The width of the facade 45 cm is considered non-standard, such models of the cargo are able to withstand the weight load of up to 120 kg, they are made of steel.
How to choose the desired size?
As a rule, the size of a particular model is selected on the basis of existing furniture or place between modules, as well as taking into account the false module, if the installation is planned to be carried out in it. It is important to determine the place in the kitchen headset, where there will be a space for the bottle, taking into account the distance for its discovery.
The size of the model may depend on the location of its location, as well as the number of cargo. For example, if it is necessary to highlight the place of storage of detergents with the placement of structures under the sink, look at the overall width of the sink. Most likely, in this case they will be narrow. If the table is combined with a common tabletop, and the modular system allows variations with the design of the lower boxes, you can increase the width of each foam to 15-20 cm.
The size needed for a particular kitchen may depend on the place in the kitchen, depending on its layout. For example, sometimes there are niches that can be used under the installation of the cargo. And here the width and depth will obey the features of the furniture, which is installed in the niche. Besides, will have the value and width of the empty place, which you need to fill the functional item for storing various kitchen utensils.
For example, if in the calculation of the width of the headset, taking into account the length of the wall, there is enough space, you can choose the models of greater width. The store will have to go with the construction tape, which the owner of the house carried out the necessary measurements. It is not worth the cargo to take a cargo to the walls: it is necessary to leave at least a minimum clearance. In some houses, the walls often leads that is fraught with furniture when it is barely squeezed into the length of the wall.
The depth of the model will correspond to the depth of the headset, since the facades of the bottle and the main headset must be merged into a single line. They do not come forward and do not fail, regardless of the type of cargo themselves, the method of their attachment and place of fixation. In addition, the desired size may depend on the place of the false module.
For example, in addition to the typical it can be bevelled, and this will already require the acquisition of non-standard size, and the sizes of the module and the opening mechanism will become the defining factors when purchased.
When buying, you can seek help to the sales consultant. Usually in stores today there are specialists who are disassembled in the selection issues. However, if the consultant does not have the necessary knowledge, it is necessary to rely on typical dimensions. For example, In stores indicate the width of the cargo themselves, but the boxes for which they are calculated . Knowing it, to purchase the desired option is easy.
Measure your houses Distance and select the desired option between the parameters that are suitable for your kitchen. No computational computing should be carried out: if there is a place with a facade of 20 cm in the headset, your option in the store will be marked "Width 200 mm". The same applies to more widely models, as well as non-standard baskets with a width of 40 cm and more. They are great for storing home appliances, saucepan, Kazan.
An important point will be the type of content that you want to remove from sight. For example, for small things (jars under the spice), dimensions can be compact and even minimal, for example, here you can do the parameters in a width of 10 cm. If you need to remove the pan from view, it is necessary to look at the options from 30 cm. However, this is provided that To place these models there will be a place. If you fundamentally purchase an autonomous version of the portable type, it is advisable to buy a miniature model.
Interesting examples
We offer 10 ideas for a successful choice of cargo for kitchen improvement. Examples of this photo gallery clearly demonstrate the combination of the aesthetic qualities of the pennels with their functionality.
- Option for kitchen in style minimalism, installation of a narrow bottle for alcohol and thermos.
- A model of wood and metal with a vertical storage system is suitable for a frying pan and blades.
- An example of a rational accommodation of the cargo in the headset with a single table top.
- The accommodation of two symmetric bottles under the spice on both sides of the kitchen plate.
- Method of arrangement of a kitchen model with a typical opening of the facade and a vertical storage system.
- An example of using a model with a width of 20 cm to accommodate two-liter bottles, cans under cereals and canned food.
- A wide model for organizing storage cans with croups, appropriately fitted in the headset due to a single table top.
- The option of the minimum width for the storage of spices, which can be placed in a small kitchen.
- Bottyboil for spacious kitchen, combined with furniture modules by a single table top.
- Functional version of the cargo for accommodation in the side module kitchen headset.
About how to mount a bottle for the kitchen, see the next video.