Garland collected from LEDs, after purchase, needs to hang it on the wall or hung under the ceiling. The room in which the auxiliary light was issued in this way will acquire a festive look.
With what can you hang?
Move the LED garland can be in several ways. In the simplest case Small nails are clogged into the wall . If the weight of the product is quite large and ranges from several hundred grams, then the nails will perfectly hold it on the wall. In this case, the wires are tied up in several places serving reference points.
But throwing the wires on the nails are not enough, they are attached at these points to the clogged nails using a thread, fishing line or tape.
In this case, the wires themselves are not damaged.
Bilateral scotch comes primarily for walls on which paint is applied. Wooden lacquered, or plastic wall panels also help securely secure bilateral tape. The disadvantage of this method - tape over time firmly sticks to the wall. After removal, he leaves sticky traces. Scotch cannot be attached to the wall covered with whitewash - it is too dusty. All of the above mentioned about Scotch fully applies to the adhesive pistol. In addition, the thermocons after removing from the wall can damage their paints or blots, which will then have to restore.
Stationery buttons are well suited for a wall covered with cloth or wallpaper. Drawing buttons are most securely included in the tree. A spike of such a button should be a length of at least a centimeter. Traces left by drawing buttons are practically not visible from afar.
Clips for wires will require any protrusions on the wall, the faces for which they can reliably catch. The ideal option is to attach the garland using the clips to the cornice or the platband of the window or door.
Hooks on vacuum suckers are more suitable for lacquered, painted or glass surfaces . They are securely fixed on painted steel or aluminum. The main requirement is the metal surface must be perfectly smooth and smooth. Vacuum suckers are fixed directly on glass glass, on a tile or tile with a glossy and smooth surface.
On the concrete wall, these suckers are also securely secured, provided that the wall is perfectly plastered and is painted or covered with internal siding or wall panels that have a smooth surface.
The basic rule for any type, type and variety of fastening the garlands on the wall, on the window or the door of the door is to The fastener did not spoil the surface serving support in each case.
Interesting ideas
Decorate the room with your own hands using dynamic or continuous burning light - sometimes a whole art. This is especially true when not one, but dozens of colored LED tapes are used. There are two types of LED backlight used in everyday life - flexible neon and duralite. The first type is products that outstand smooth and homogeneous light. The second is the links, in which the light of individual LEDs clearly distinguish.
Specific species include different types of garlands.
Nitevoid - LEDs placed in protective housings are connected using a long cord. Extra contour figures that they highlight can be supplied to them, repeating their outlines.
LED Grid - cords crossed together. It is a type of thread, from which the cellular structure is assembled.
Fringe, "Rains" and other garlands like them. These are secondary cords with LEDs, connected to the main tire type. Compared with a shorter fringe, such a garland hangs down to one and a half meters. Connoisseurs apply it as a glowing veil on the door.
In the form of a Christmas tree
Beautifully hang the garland on the wall can be, for example, In the form of a contour of the Christmas tree. For the new year, this is especially true.
As a rule, a single garland is not enough here - 2 or more will be required.
To portray the luminous contour of a large tree, it will take no one hundred LEDs. Such a decor looks rather original. Inside the luminous circuit there are Christmas tree toys, filling them all the space in it. This is a great way to not buy a pine or a small spruce - New Year's coniferous tree is effectively simulated by an attribute, which is not really a real New Year tree. Festive mood to hosts and guests is already provided.
With photos
Select the most valuable photographs for you. On the garland they can be fixed using clothespins or clips. Photos are hanging instead of a picture or reproduction within a large photo frame from a tree, which, in turn, is filled with these photographic materials.
If there were no old photos, then you can draw on the wall of some kind of gaming character, using the elementary projection of your favorite hero printed on the printer.
After creating the desired image on the wall, some details can be highlighted by laying out the required contour from the LED thread or cord.
Patterns
Besides the circuit of the tree, with the help of luminous LED ribbons easily Forms of arbitrary shape are formed . They will give the room a special comfort, which will fully like everyone - from the owner to other households and guests.
An alternative to the pattern is an inscription, reflecting the state of the soul of the owners and the atmosphere of the holiday. The contours of the pattern can be any image or picture - to emphasize its basic lines, you will need not one hundred LEDs, but more often than white or yellow garlands hang on the frame that it fits around the perimeter. The brave idea is a recognition of a girl or wife in love that her man gathered on the wall of the garland, placing them in the form of an inscription.
Other options
Decorative christmas garland over the bed can turn into a year-round working backlight or so-called intim light. This allows you to additionally decorate the room with multi-colored light, not by purchasing lighting lights.
Garland is the same LED tape as the usual lighting, only a special dimmer is used in it, providing flashing, and instead of a substrate made on the printed circuit board, the wires suitable for each of the LEDs are suspended. Besides, Garlands are made completely safe - They have a driver or power supply that converts a 220 volt network voltage in, say, 12 or 24, almost completely safe for a person working without protection. With the advent of the LED market, time passed when the garlands were considered electric shock - in them the LEDs are connected mainly in parallel with small consistently included groups.
If you remove the dimmer from the product, the LEDs will burn constantly - not everyone likes constantly blinking or flickering light.
If you go beyond the room or apartment, it becomes possible to organize festive lights in the yard. This is especially true for country houses. In recent years, it has become fashionable to exhibit its New Year (or any other festive) lighting of the deposit - garland with the help of two-way tape is suspended around the perimeter of the metal-plastic glass package. Everyone passing by windows will see multi-colored backlight. Shops, supermarkets, all kinds of outlets for attracting additional buyers use links and garlands.
Beautiful examples
Some solutions affecting their beauty can be realized only by looking at the illustration below.
Electric lighting over the table In the form of yellow stars decorate the interior of the kitchen-living room . As an example, a long cord, folded in the form of a serpentine track, remindingly resembling a zigzag. Lighting burns continuously - it will suit even for the most difficult atmosphere at home. This embodiment of a small backlight on the wall does not need any reason. This option is often used by all sorts of art cafes, hookah, where the atmosphere of comfort and ease is maintained for lovers and couples. Instead of the molds, the stars can be used the housings of white or matte-transparent design in the form of hearts, faceted diamonds and so on. Fantasia and an amusement of the founder, the organizer of this design is not limited. The prototype for such a solution was the white stall lamp, which was installed in the wardrobes in the mid-2000s.
A pretty bold solution is to decorate the workplace at the computer. So, if you are often engaged in a game streaming, then your image on the viewers screen will see with a flashing fold, which will attract additional subscribers who saw you later in the new, so to speak, light. Little garlands are hanging around the perimeter of the monitor display - but so as not to evade the player a pixel matrix of the display itself. Reflected choppers will fall together with the image of his face (and the workplace) in the webcam.
In some cases, the wall is fully over with LED garlands. There are prefabricated models on which the main cord (tire) has a reinforced cross-section of wires. At each of the dozen garlands there are contacts (terminal pins) for connecting to terminals located all over the cord. Connecting long garlands - purely parallel: the power supply produces 3.4 volts, converting 220 volts from the outlet. The power of the power supply is selected with a margin. It reaches hundreds of watts, and the garland itself is all its segments - are designed for total speakers in dozens of watts. The power supply is located in an inconspicuous place for an outside observer - for example, behind the back wall of the computer table or behind the mirror. Cord, whose insulation is a transparent, slightly painted in a silicone's inappropriate color, will not spoil the room design. The wires on the LEDs are quite thin, to also not get into the eyes of a widdle in the room. Vertical glowing thread garlands are located almost straight and evenly - and effectively decorated the wall in the room even when the upper light is turned off.
Some homemade masters wovel or cross the LED tape in a light curtain or dense curtain, have in blinds.
Such The light will complement the round mirror, Lean to the wall - it reflects part of the light into the ceiling, as well as in front of it, on all sides. This light scenery looks very creative in the guest room, where there is a TV and a music center, a table or a long stand with a built-in bookshelf, paintings and reproductions on the wall.
The bedroom, in which preference is given to pastel-white tones and a non-market scheme, for example, decorated as follows. A LED contour hangs over the headboard, reminding the outlines of a small house. This drawing is a reference to the home coat, such a framing looks no less creative. You can proceed and vice versa: During the day on the white wall, the dark wires denote the contour, for example, stars, tree branches or flower. The guest, who first visited this room, would not immediately guess that in front of him the garland, not a simple scenery until the owner of the room turns on this garland.
Svetogirlands - One of the brightest methods to express yourself. Whether you got some ready-made garlands, or you have collected them yourself, ordering hundreds in China or thousands of different-color LEDs, let the will of the imagining imagination, and the surrounding will be delighted with the atmosphere of the holiday you created.
Someone does not like the type of simple garland - they want something more original. If you are of these, then we recommend to see the following video: