Epoxy resin is an amazing material from which you can create entire works of art. Relatively recently popular was the new direction called Resin Art, which involves drawing using such a resin. Pictures are obtained very beautiful and spectacular. We will talk about them in today's article.
Peculiarities
Art is constantly developing and complemented by all new interesting directions, to a number of which can be attributed and the above type of drawing Resin Art. Masters who have mastered this creative technology create real original masterpieces that look attractive, unusual. With such a scenery, almost any interior is able to wake new paints.
Initially, epoxy resin was used in construction and immediately showed itself Good material. Until now, it is in many cases used for different kinds of repair household works. However, not so long ago, the properties of epoxy resin allowed to use it also in art, decorating and decorating the premises. This material is available in the usual liquid composition, which is initially divided into 2 main components.
If we consider these components "epoxy" separately, then it can be noted that separately they can be stored for a long time, not losing their physical and chemical properties . In the case of mixing, the material necessarily becomes solid. It is in the solidified form of epoxy resin and it turns out to be the most practical and convenient in operation. It can be shattered to grind it, expose one-sided treatments, sawing and even drill holes in it. The initial form of the workpiece will be saved.
High strength indicators make it possible to apply epoxy resin as a binder component in the production of fiberglass. It is also often exploited to the air or road structure. In art, this material is used due to its distinctive features and features.
- In the frozen state Epoxy resin can save both shape and volume.
- In the course of the fill The liquid solution forms a perfectly smooth horizontal surface that does not have flaws or defects.
- If necessary, the Master can grind or handle the workpiece made by them. If over time and the scratches are formed, you can easily get rid of them if you apply on top of a thin layer of resin.
- Transparent array will not suffer from negative impact of ultraviolet rays . After the tinting, all colors will maintain their saturation and juiciness, and decorative parts, poured with resin, do not change their appearance.
- High strength indicators make it possible to fill with epoxy resin Even floors in the conditions of industrial premises.
There are so many different art techniques, But Resin Art is distinguished by the fact that the canvas turns out to be mobile . It is almost impossible to fully control the result. Paints will be mixed even after all work will be completed and the drying process will end. As a result, very lively, realistic paintings, such as cuts of stones, marble, landscapes with the image of the sea, space, reefs and many other beautiful compositions are obtained.
Swimming the coloring components and shades on one canvas allows you to get abstract pictures that are gaining and for a long time delaying the attention of people.
What can be drawn on?
It is important to choose the basis for the future image applied by epoxy resin. For such purposes, the surface consisting of wood, plywood, MDF, plexiglas, plastic, metal or concrete is perfect for such purposes. Cleaves on the subframe are suitable.
It should be borne in mind that the foundations that are characterized by a porous absorbent structure are not suitable for the manufacture of a drawing of this kind.
Materials and tools
In order to create a spectacular picture in the direction of Resin Art, the Master must prepare a number of necessary materials and tools, without which the future workflow does not cost. So, from among the necessary components, the following units will be needed:
- epoxy resin directly for drawing;
- Suitable base is a tablet, or a special artboard;
- Pigments and dyes;
- acetone;
- plastic cups;
- Wooden spatulas;
- burner;
- Malyary Scotch;
- Construction level (the most convenient will be a modern laser instrument);
- Special nitrile gloves;
- apron;
- paint respirator;
- electronic balance;
- gas burner (need to remove bubbles);
- polyethylene film.
Many novice masters are interested in which concentrate dyes are most suitable for drawing epoxy resin? Today, you can find a lot of different types of similar compositions, designed specifically to work in the RESIN ART technique or to create compounds. You can use such coloring products.
It is not forbidden to use and dyes-concentrates in the form of powder, pearl, metallic, alcoholic ink, crystals, glitters, and even decorative stones.
With the use of such elements, the master can create a very spectacular and original picture, transmitting a variety of scenes and compositions - a fantasy artist can let go of freedom!
It is important to correctly calculate the desired volume of epoxy resin. This indicator will depend on the immediate size of the base. As a rule, per 1 square meter. m. Surfaces leaves 1.6 liters of resin. The thickness of the coating reaches about 1.5 cm. A more accurate amount will be treated with special online calculators.
All the necessary tools and items should be placed in one place available for you so that during the creation of a spectacular picture you did not have to be distracted in search of the desired detail.
Preparation
If you have purchased all the necessary components to create a picture, you can move to the preparatory stage of the work. First it will be necessary to cook the canvas. For example, take a sheet of wood or plywood. The base should be predetermined by a special acrylic primer. You should not forget about the preliminary sketch of the future picture. For an outline, it is best to use glossy sheets, the basis of which is not matte. If in the design of the picture I want to portray the relief, this site will be required in advance to the woven base, which will further be moistened by epoxy resin.
If, in accordance with the idea of the artist himself, the facial drawing will be located with "Isnake", then more attention will need to be given to the first coating of epoxy . Corrections can be carried out only after removing the applied substrate. Moreover, in this situation, in the future, the master will have to give the surface of the gloss. Before creating the picture itself, the basis is necessarily exempt from all pollution. It will also be necessary to prepare epoxy paints correctly. The preparation process includes 3 main stages.
- First you need knead the composition strictly in accordance with the instructions . It should be carefully and scrupulously prevent.
- Further, the basis is overflowing into a new and clean dishes . Component A will remain on the walls of the first tank. If you hit the picture itself, it will slow down the drying process.
- Then the solution will need to be poured on a small container and tinkering selected pigments.
Drawing technology
Original and realistic paintings applied by epoxy resin can be portrayed with their own hands. If before a person did not come across such creative work, it is recommended to rely on a step-by-step master class, which describes in detail each of the stages of creating a picture. Picture of epoxy resin can transmit a variety of images. Very bright and charming are compositions depicting space, sea, living nature and other harmonious painting.
Having at hand a set of all the necessary tools, as well as clearly following the creation technique, the master can get excellent results.
Consider in detail, from what steps is to create paintings by epoxy resin.
- The starting layer of the picture will be transparent epoxy resin. The role of the next layer will perform a snow-white composition. It will perform the function of a kind of substrate for all subsequent paints, will give the opportunity to get brighter and deep colors.
- In order for the pouring to be the most uniform and neat, you can use your hand in a protective glove or a plastic spatula. The second adaptation must be influenced, so as not to leave scratches on canvas - they will negatively affect the appearance of the resulting picture.
- There are no established rules, how to apply a resin of different colors . In this case, the Master should rely on his own intuition. Create 2 identical products is almost impossible.
- After you apply all the necessary components to the selected and prepared canvas, the picture will be needed competently, using the gas burner . Through this device, it will be possible to get rid of the bubbles that appeared, and also make the surface of the picture perfectly smooth.
- It will be stuck such creation around 8 hours. It is important at this time to arrange the resulting work of art on an ideally level, stable and safe surface. In this case, the liquid composition will be able to correctly and gently distribute.
- When the picture is to the end freezes, the edges of the base from the plywood sheet can be treat suitable acrylic paint which will correspond to the tone of the most friendly canvas.
Safety regulations
When working with epoxy resin, the Master must follow a number of security rules. Epoxy is a sticky substance of a viscous consistency, which can fully harden under room temperature for a certain period of time. The master must take care of protecting both their clothes, and furniture from possible pollution and stains left by paint.
Do not forget about protecting your own health, working with epoxy resin . Even if you use high-quality and certified facilities / compositions, this does not mean that they will not be able to cause allergies, hitting the surface of the skin.
Allergic reactions can occur very violently than they will deliver a mass of inconvenience.
In order not to encounter such problems, you need to wear for work High-quality protective gloves, sleeves, special apron (Instead, you can choose a bathrobe). It is ultimately not recommended to take food or any liquid if you are in close proximity to the resin, which is still not fulfilled until the end. It is necessary to accurate and special protective glasses.
If you do not protect the mucous membrane of the eye from the contact of the resinous solution, the risk of becoming burns.
After completing creative work on creating a picture of an epoxy, it is necessary to make a good room to ventilate the room where all the stages passed. The containers in which the necessary mixes were kneaded and prepared, it is desirable to immediately throw away. Clothes and protective agents need to be rich abundantly under running water.
If you adhere to these simple security rules, the master will be insured against many troubles and negative consequences from working with epoxy resin.
Useful Tips and Recommendations
If you first decided to work with epoxy resin, to create your own hands a beautiful picture, You should adopt a few useful tips and recommendations.
- If you planned to engage the epoxy grinding, do it Only in a special respirator mask. Make sure that the dust distinguishes does not get into your respiratory tract.
- If on the finished picture of the epoxy you noticed ugly dents, you will need Ginger the surface of the product, and then apply a new layer of resin.
- To create a spectacular and durable picture Do not use coloring compositions that differ in the water basis . If you enjoy similar solutions, the epoxy resin will surely listrate, will lose its properties and can not even harden.
- When you process the resulting point from epoxy resin using a gas burner, It is important to quickly clean the flame. Otherwise, the image risks sculpt.
- Very nice and interesting in the considered paintings look Blurred effects. To achieve them, the master can take advantage of the dungement of the usual hair dryer, which will be directed to the freshly mounted epoxy layer.
- In the process of creating a picture of an epoxy pattern It is possible to expose all sorts of adjustments If there is a need for this. To do this, add a special tinted polymer to the necessary places on the surface of the product.
- So that the painting does not settle dust to its complete hardening, You can cover the art with a pelvis or canopy.
- It is important to choose the room, In which you will make your own hand painting. It should not be raw. After completing all the work, there should be a full-fledged room ventilation.
- It is recommended to make pictures of epoxy resin In temperature conditions + 20-22 degrees Celsius.
- We must consider that To create real images, the master must have a certain artistic talent. Some pictures manufactured by professional artists are not inferior to the works that are written by oil on standard canvas.
- Selecting all the necessary materials for the manufacture of high-quality painting, it is recommended to give preference only to brand, Safe and certified products whose composition is not toxic. Of course, even if all the components will answer these requirements, it does not mean that you can not use protective devices - they will be needed anyway.
Beautiful examples
Correctly using epoxy resin, artists with a rich fantasy have the ability to create a huge number of unusual and insanely beautiful paintings. Such products will easily become a bright accent of most interiors. Households and guests will necessarily be conquered by a similar decor, and it will definitely not become poor or faceless. Consider some interesting examples of such paintings.
- The present product of art will be a glossy epoxy resin pattern depicting Beautiful summer sunset With the predominance of dark blue, purple and pastel shades. A similar pacifying composition will fit into many settings.
- Image of bustling oceanic or sea waves Fugging about the rocky coast will look like a particularly charming and mysterious if dark blue, purple and contrast of turquoise, blue shades will prevail in it. It is from epoxy resin that a similar composition will be particularly solid and attractive.
- If you are a lover of colorful and saturated abstractions, You will have to taste the original picture from epoxy resin, depicting a real explosion from the multicolored paints of juicy shades. A similar image will look interesting not only on a conventional square or rectangular, but also rounded the base. If you want to make a bright accent into the interior, this picture will ideally cope with this role.
- An image of azure sea waves with snow-white foam, Best to the sandy shore will bring to the interior of pleasant notes of relax and peace. A similar decor will refresh the situation and make the interior more relaxed, stylish.
- Very nice and mysterious on suitable canvas look Pictures of epoxy resin depicting cosmic landscapes . It may be a dark starry sky, nebulae or entire planets with all the color overflows inherent in them. Today in many interiors you can meet the spectacular images of the cosmos made using epoxy.
- Popular and very beautiful are pictures of natural stones in the context. Such images are obtained particularly high-quality and realistic if they use epoxy resin for their manufacture. Coloring at the same time, you can use a variety of one - from neutral gray to the motion of purple, pink and turquoise. Just passing by a similar picture, without turning his attention to it, it is almost impossible.
On how to draw a picture of epoxy resin, see the following video.