The art of making flowers from silky fabric is the base of Kanzashi. Atlas and organza in skillful hands turn into decent admiration of the decoration. About 400 years ago, a tradition originated in Japan to make lush hair compositions. Often Japanese make them with their own hands. Exclusive trifles to create an individual image is not necessary to buy in the store. How to make a rose from pieces of matter - this article will tell.
Peculiarities
In the country of the Rising Sun, the flowers in the technique of Kanzashi was made to decorate only hairstyles. Comb, hairpins, studs with different types of inflorescences for every time they had a lot. Modern designers offer different options for using inflorescences for decor.
Not only hair accessories are drawn up as well:
- brooches, rings, clips;
- clothing or headdress;
- Frames, paintings, boxes, curtains.
To create colors, leaves and stems use pieces of fabric. Pre-cut into squares, folded in a certain way and are consistently connected. Roses in Kanzashi technique are distinguished by the wealth of colors and sizes. Forms are also varied: there are rounded, pointed and wavy, there is only a blooming flower and with a lush crown. Frame composition with leaves, complement rhinestones, beads.
A characteristic feature of such products is bulging and volume, plants are obtained like alive. Fabric for work pick up elastic to keep shape. The craftsmen like bright juicy paints and interesting combinations, for example, atlas and organza.
The peculiarity of this method is to pick up and gluing individual elements into a single ensemble.
Volumetric panels in front of us or boutonniere - the principle of working with each part lies in a clear technology.
What are there?
Carefully considering roses from the fabric, we notice that in appearance they are sometimes very unlike: some sharp tips, and others stand out with a large crown. The rules for the manufacture of each model differ significantly.
- Classic variety - Made from satin squares, folded several times and bonded. It turns out a lush design with a tight rolled core.
- With sharp tips - According to the method of preparation and assembly resembles the previous type, but in the process of operation, the squares of silk are bent under an acute angle.
- Flat, twisted , reminds slightly open rose with a dense crown.
- With curved petals - This is a rather time-consuming variety: each element is cut according to the template, weave on the open fire. The effect of natural concreteness is achieved.
Buds on the twisting method and the end result may very different:
- closed;
- ajar;
- Frameless.
Mini roses twist from narrow braid, look original and suitable for decorating small hairpins.
Out of organza, air and translucent ornaments are obtained.
Two-color - multicolored matters on a contrasting combination give original compositions.
Lush is a completely blossomed flower with a voluminous halo.
Tools and materials
It is necessary to prepare the next set:
- satin ribbons, organza or other tissue;
- line;
- sharp scissors;
- direct tweezers;
- candle or lighter;
- transparent glue (for example, "moment") or a glue gun;
- Threads (better silk) and thin needle.
In addition to the listed may be additionally needed for individual projects:
- felt;
- English pins;
- cardboard;
- Beads.
To cut the parts and collect the flower, only the fabric, glue and tweezers are required. And for a beautiful design of one or several elements, additional materials will be by the way.
Master Classes
Learn to create my own decorations for yourself, as a gift, a friend or mother in the style of Kanzashi is quite simple. To create an unusual and sophisticated brooches, a bracelet or rim from silk, a similar technology of preparation and connection of satin pieces in beautiful crafts is used. It is important to successively perform each stage of MK.
Classic option
- Prepare a 5 cm width tape. This is the most convenient size for work. We cut into squares in size 5x5 cm. Cut locations on the flame so as not to be tremended.
- 7 or 8 square pieces are cut for booton, for a small rose - 15, and for a lush flower - 20 or more.
- Squares fold with opposite angles and fix, as in the photo, a hot tool or thread with a needle.
- From the blanks we put the petals - free corners we sweep to the center and fix it. The elevation angle can be done differently, if one to another one to another - we get a narrow petal and vice versa. Widely issuing the outer part, and the narrow will form internal.
- Cut off the part where the corners converge about 0.5 cm, holding the tweezers and after trimming over the flame.
- We make the middle - on the base of the non-screens of the part from the outside, we apply glue with a match or toothpick. We fold in half and tightly fold in such a way that the edge on the edge was laid in a mustache. Watch the seams inside.
- The next workpiece is also lubricated with glue and turn around around the core. The upper part does not fit completely at the base. Further fix in the same way.
- Each new fragment is fastened from the opposite side of the previous one, that is, the edges of the first element will be inside the second, the second turn the third. The volume of the flower, the less the parts twist and the amount of their number.
Ready copy decorated with leaves, rhinestones, lace. Such a product can be decorated with hair gums by placing one by one.
Suitable for decoration of shoes, belt, bags.
Tea roses
- 2.5 cm width tape cut 7 cm long. On 1 bouton, 11 segments will be required.
- The tips slightly melt on fire.
- Penitate the corner and leament.
- Through the thread, the matter is going to the fold, and fix it. We have a fragment of a flower. It will take 11 petals: the 1st and 2nd rows of three, and in the 3rd row - five.
- We collect into a whole - twist the middle of 1 petal with a roll, be asleep and secure thread. The tip is cutting and paying.
- To the middle of Krepim in turn of fragments - only 2. At the bottom edge, it is applied to the bottom edge, the core roll is turned around and easily compressed. The second - glue from the opposite side.
- The following series consists of three elements. The glue is applied from below half a petal and pressed to the base. One after another attach, retreating so that the unwashed half came to the next petal in the row. The third will close the first.
- The last row includes 5 parts, performed in the same way.
- From the green satin ribbon 8 cm long prepare leaves. We fold it in half and cut the halves of the leaves. This is done with scissors or soldering iron. If cut off with scissors, then the edges melted on fire. Listers turn and glue.
The obtained billets are suitable for the design of the hoop or boutonnieres.
Master class on hairpin
- Prepare green, white and pink satin ribbons. Sections process flames.
- Pink and white - 2.5 x 6 cm, green - 2.5 x 10 cm. It will take about 6-7 petals on the bud, on the blossomed flower - 20-22.
- We fold the same as in the classic version of the manufacture (see above).
- For the craft, it will take 28 white and 20 pink. Flowers will be two-color: inside - pink, and on top - white.
- Cut the leaves. Flexing 2.5x10 cm tape in half, cut the sketch diagonally or scissors. In the second case, they melt on the diagonal of the edge. Two types are obtained.
- We collect according to the classic scheme, combining white and pink tone: for bud 3 + 3, for flower 7 + 14.
- Butons put in leaves envelopes and glue, a large flower make up open leaves.
- A 2,5 x 8.5 cm felt is glued to the leaves on oval, we use all the remnants.
- We glue small roses, leaving a place for a huge - in the center. You can accommodate otherwise than in the photo.
- The hairpin (you can choose another type) recommend gluing felt flap. Clamp for hair with holes can be pre-sewn.
Bouquet Kanzashi
How to make inflorescences of different sizes, is already understandable. Let's try to make a bouquet of them.
Would need:
- ball of foam or semisfer with a diameter of 12 cm;
- bushing from bakery paper and dense cardboard;
- glue, scissors;
- Satin braid, lace, beads.
The manufacturing process itself looks like this.
- We cut the sphere of foam on halves.
- From the sheet of cardboard, we cut the circle with a diameter of 20 cm and fold into a low cone. The ball must fit into it freely, the cone should be a little more.
- We have a sleeve in the middle of the hemisphere. In the cone, you also need to make a small hole in the middle.
- Circle from cardboard decorate lace or atlas from the center to the circumference, the place of the cut glue.
- The sleeve is wind up, and then from top to bottom with a bright braid and glue. In the hole on the foam place a large amount of glue and insert the sleeve is a leg of a bouquet. We close the cone, decorate the base and edges of the lace. You can add beads, hearts, bow and other items.
- On the basis of the foam placing the workpiece. Here will be appropriate both flat and magnificent buds. Decor of leaves, braids, rhinestones - in any of the composite options will look appropriate, the main thing, to keep the measure or focus on something one.
From satin ribbon
In an effort to create a rose, very similar to the real, needlewomen are resorted to a variety of techniques. For example, each petal is cut separately. To do this, prepare a cardboard sheet.
- We draw 3 templates, as shown in the photo.
- By templates, cut 20 blanks of 6 and 5 cm and 15 to 4 cm.
- Scenes on each process over the candle. With the help of fire, we attach a concave form.
- We take a cotton wand, lubricate with glue. Little petal carefully wrap around.
- On the next bottom we applied glue and pressed to the stick.
- Little details concave part inside in turn freamers to the base.
- Then comes the middle and large. But now the concave part is postponed.
- Cutting a cotton wand at the end of the work along with the base.
From organza
The material itself adds a craft of transparency and pomp. Light compositions will become excellent replacement of bans and ruffles.
Little flowers:
- For small roses, a narrow tape of organza is taken 2 cm wide, about 50 cm long.
- For leaves - 4 cm width, and 8 length.
- The edges of the braids are cut at an angle and we melt on fire.
- We take a long needle and, piercing every 2.5 cm, we collect braid on it.
- We raise the assembled part to the needle's edge, and the tape of the braid is made in the UCHO.
- Rotate the needle clockwise than the more intense rotation, the denser the bud will be. Rotation in the opposite direction will help form the desired inflorescences density. Raise your eye up - get a compacted core.
- Shot the needle through the assembled braid. Sold up too much and treat on fire.
- We drink threads inside or crossing.
- For a sheet, we press the green braid into the triangle, we press the tweezers, cut and pay.
- We make 3 folds, cut the tip and connect two parts.
- You can arrange additionally.
- We glue to rosel.
Small twisted roses are suitable for decorating studs, hoop or dresses.
Recommendations
- For the operation of the bulk of the matter, there will be a fire - a lighter or soldering iron. Candle leaves free both hands - this is the best option for beginners.
- For the first experiments, they advise you to choose thick satin tapes of dark tones, if accidentally fall, it will be unnoticed.
- Squares are cut in size 5x5 cm. This is the most convenient size.
- The needles choose thin and long, and silky threads.
- Folding the first details, do not rush to apply glue, try it several times without it.
- The glue takes a transparent and fast drying, for example, "moment", to apply it better with a toothpick or wand.
- It is better to start with crafts from several elements, and then proceed to more complex.
On how to make roses in Kanzashi technique, see the next video.