Stand at hand for manicure: pros and cons. How to choose?

Manicure is a creative and painstaking process, besides enough long. In order for the client to be satisfied with the process, the workplace must be equipped with "5 plus". One of the necessary attributes on the master's desk is a manicure stand-rack under hand or pillow (roller). With their help, the creative process both for the client and the performer will become truly a pleasant pastime.

Advantages and disadvantages

Stand or pillow for manicure on hand will help remove the tension of the back and neck. It will delicately support the hand of the client, and its back automatically acquires the "correct" form. At the same time, the master must be in a comfortable position.

The manicure stand is an excellent attribute to protect the cervical and spine with long loads. It should be noted that it is currently not difficult to acquire a similar attribute.

How to choose a manicure stand?

If you decide to purchase this accessory in the store, then Pay attention to the following points:

1. All the seams are qualitatively covered;
2. whether there are lacking nails and screws;
3. plugs should be tone material;
4. glue should not be visible;
5. Design reliability: accessory should not creak and stagger, but to have a stable position;
6. There should be no scratches, stains, scuffs.

However, there is one minuses in such a purchase: the cost of the stand varies from 1.5 to 2.5 thousand rubles, which is quite expensive. Another of the common problems when buying a manicure coach under hand is its incorrectly sized size. In a similar case, the stand can be made with your own hands. This will make it possible to create the desired attribute of pleasant coloring and the corresponding lamp size, and will also help save money.

Self-making stand

So, for the manufacture of the rack (about 2 thousand rubles will cost in the finished form) under the lamp (20x15x10 cm size) take the following materials.

• Wooden rails (10-15 mm width, 35 cm long) fasten with a PVA glue. As a result, we get one "plate" of 16 cm wide, which is then divided by 3 shields using a jigsaw. Next, we tighten the shields received by clamps and wait when glue freezes.

• When glue dries, we proceed to grinding wooden plates. The ends align with the plane. We get three smooth shields of the same length and width.

• To give an aesthetic view, we spin the ends of the shields using a jigsaw (will help the stencil from the cardboard, which will make the angles of the same size).

• We proceed to the manufacture of walls for the stand (their length is 11 cm). The walls are constructed from the rails (their width is 16 cm).

• As a result, we get five parts: the lower, upper and main shield (its tight cloth), the left and right wall.

• We start assembling. We take eurgowrup (confirmants) and drill a hole with a drill under them. Construct a stand of 4 parts, while without the main shield that will be covered with a cloth. This item requires careful preparation - it must be shortened (literally by 1 cm) with the help of a jig.

• We take the main shield and glue the foam rubber to it (the dragon glue is suitable).

• The next step is the tip of the top detail with a cloth. We use natural skin (easy to wipe and disinfect). We take a piece of leather with the "stock", for full shield girth.

• The manufactured upper part is attached to the overall design using self-tapping screws.

• At the final stage, we cover the homemade stand for manicure under the arm of varnish and let dry.

Making a roller: step-by-step guide

Another accessory for a comfortable manicure is a pillow (roller). It can also be purchased in a specialized store and make yourself. The process is not the most complicated, but painstaking.

1. We make the pattern of the desired size.
2. We obtain the main part of the rectangular shape (the edges will be connected by the seam) and two mugs (side sides of the pillow). Dimensions are different: side elements 13 cm, width of the main part 28 cm, length - 41 cm.
3. Twist a piece of foam rubber in the shape of a roller, pre-labeled glue.
4. We are wearing a pillow with a cloth (it should be humid processing). First of all, the main part, hereinafter - the sides.
5. Fabric colors for pillows can be different, but not annoying.

A comfortable high-quality stand for manicure under hand is excellent assistants for masters and customers.

Overview Stands for manicure in the video below.