Jeans are sewed on the established standards, so they look less attractive on girls with a nonideal figure. Although there are also separate collections for girls with a non-standard figure, but it cannot solve the problem completely.
If the figure only slightly deviates from the generally accepted parameters, then you can buy a favorite model of jeans and take it a little. This process is simple enough, so it can be carried out independently at home.
Is it possible to do or two less?
Over time, your favorite jeans lose shape, stretch. But you should not say goodbye to them, because at home you can reduce them on the size or even two.
To sew jeans yourself at home, you need to prepare a sewing machine, centimeter, threads, needles, scissors and pins. Stock free time.
We erect local
If jeans look great at you, but a little big in the belt, then the situation can be corrected if you take them along the rear seam line and on the waist.
If your favorite model has become a little loose, then it is worthwhile to cross the side seams. To make a narrowed bottom, it is worth sewing jeans on the inner seams.
In the waist
Many girls have a wide beer area and a thin waist, so any pair of jeans will be free in the waist. To solve this problem, jeans should be sewn one of two ways.
The first method is the easiest:
- First you need to make a few drops along the belt line.
- Next, it is necessary to accurately fract out a few centimeters of the belt.
- Thoroughly flash all the wratbles.
- Cut extra centimeters on the belt, and then sew it back.
- It is necessary to be extremely neat when creating a mold in the zone of the buttocks, since very long seams are pulled up.
The second method is more complicated, but high-quality:
- First, you need to fracture the cut, which is located behind the center. In some models, it is necessary to eliminate three slaves at once. If the branded label is located near, it should also be removed.
- Carefully resort the belt, but only ten centimeters to the left and right from the middle seam of the product.
- Then you need to pay attention to stepper seams, and make it a strut for eight or nine centimeters.
- The remnants of the thread should be removed, and all the seams are good to try.
- Middle seam is needed from the front side to fix with a pin to avoid a possible offset. Next move the attachment of the pins on the wrong one and make an outrage of the iron.
- Fold the trousers together and at about a distance of two centimeters to draw a line at a small angle.
- The line must be searched, and the edges of the fabric will wash.
- Next, turn out jeans on the front side and make two lines in the center.
- Go again on the wrong one to sew a stepper seam, and finish the front line on the front side.
- The belt must be attached to the new waist size and cut extra centimeters, but remember the allowances.
- Further, the product must be folded twice as the front sides inside, flash and deploy before ironing.
- Credit the belt and the main part of the product with a pin and sew the cut back.
In Berdah
To reduce the size of jeans in the hips, you should sew them along the side seams.
To calculate the distance you want to remove, one of the ways can be used:
- Remove jeans on the wrong side and wear. With the help of a pin to mark a new seam.
- Take the pants that fit the figure to attach them to them those you want to sew and draw a line.
The process of reducing the volume of pants in the bemps occurs in several stages:
- First you need to fret the belt.
- Next, the sirens on the sides and shoot them on the new seams.
- Extra sort of material cut off, and the sides wound.
- Send the belt.
If jeans are spacious in the hip zone and in the waist, then the belt should not be disapple. The trousers need to spread completely and gently flash on new dimensions.
For jeans from a subtle denim, you can make molding on the sides, then the model will be better sitting on the figure.
We transform cool to a narrow model
Very often, some models of jeans go to the past, and new styles come to shift. Most recently, every fashionista had an unfolded jeans in his wardrobe, but now they came to replace narrow models. Do not part with your favorite jeans, because they can be altered.
To sew jeans in the legs, you need to do the following:
- Remove jeans on the wrong way, and try.
- Men to designate a line for a new seam, but at the same time you need to consider one centimeter, which will go to the shrinkage of the product after washing.
- Jeans need to be removed, decompose on the horizontal surface and upside down from the knee down.
- Gently make throwing seams along the line, which is marked by pins, and put on the fitter once again.
- Extra centimeters of fabric cut off.
- On the sewing machine to make durable stitches for metal.
- Zigzag or Overlock can be used to process edges.
Advice
- Inexperienced needlewomen should not fully break the pants, as the crotch area is very difficult to sew correctly.
- When choosing a thread, you should give preference to threads for sewing jeans, although they can be replaced with usual.
- All seams must be performed by a double line that guarantees strength.
- Do not hurry to crop threads. The pinching seam must necessarily have stitches.
