Leather bag - a comfortable stylish accessory for any amateur leather products. Ordinary shopping products will not suit those who have the desire to stand out and differ from other people. In this case, sewing saves. Needlework will help create a unique unique bag. And the choice of skin will give the status to its owner.
What is needed for work?
Before starting work, you need to make sure that all materials are cooked. To create a bag, you will need:
- Skin piece;
- Durable special skin needles and for desiccation;
- Draver;
- Ruler;
- Awl;
- Scissors;
- Glue;
- Centimeter;
- Wooden bar;
- Clothespins;
- Hammer;
- Pieces of wood chipboard
Pattern
Before proceeding with the pattern, you need to determine the size of the bottom of the product, all the details will be placed around it. The width of the bottom depends on what is planned to be transferred in the bag.
At the beginning it is created at the bottom of the rectangle of the desired size. The panels are recorded on the side. They must be equal in shape and size. The values are folded as follows: The width of one side side should be equal to the length of the entire product plus half the width of the bottom. Height is determined by the needs.
When creating a handle, you must remember that the balance of the product depends on them. Therefore, it is necessary to correctly place the side pens. For the correct arrangement of the belts you need to split the top edge from the side of 3 parts.
Next, you need to designate the length of the handles. When pondering the width of the belt and the handles, it is worth considering that they must be combined with the product itself.
When building a pattern, you should not forget about the seams. It is necessary to make indents for the seams. It is necessary to give 1.25 cm for each side of the bottom and side parts. For the upper part of the side of the side, the allowances are not required, because it is not necessary to sew anything there.
Calculation of material
Quite often, the magnitude of the skins sold determines the size of the product itself. But still, to the calculation of the material you need to go with full seriousness and calculate everything for sure. When calculating should not forget about the details of the bag (pockets, finishing elements). Therefore, at first it is worth expanding all the details of the bags on the skin. Quite often, on kind of material there are defects (holes, scuffs, dents). It should also have a cloth.
On average, the bag requires 1-1.8 square meters. m material. All dimensions are relative, it is necessary to clearly decide on the model and correctly create a pattern of the bag.
How to sew pens?
For the handles, you need strips from the skin of the selected length and width, needle and thread. Strap folded and start to sew to each other with an inside. It is necessary to retreat from the edges of 7 cm, at the end to postpone approximately 7 cm to fasten the straps to the bag.
After completed work, start attaching the straps to the product. First you need to fix the places where the handle is connected to the bag. Places of these clap cluster. Before the sewing, you can stick the handles to the bag a bit. The seams should be twice.
eight
Photos
How to install accessories?
Installation of fittings will not only help decorate the product, but will allow you to hide small shortcomings if they arose. Such decorations will include buttons, buttons, locks, other rivets.
Perfectly complements leather products metal fittings. To attach the rivet to the bag, the glue, glue fabric.
One of the most classic jewelry is a small handle. Such item can be attached with a small skin sewn to the bag. From the skin to make a strip of approximately 6 cm long. Line fold in half and in the middle inside the plane. It is possible to immediately glue the strip among themselves to fix it, and then flash. Secure this decoration on the bag is needed using a sewing machine.
Also on the bottom of the bag or as an ornament, you can add bugs (metal convex details).
On the product, such buttons are attached using a special device. At home, you can use the awl, having done small holes. Place the Puppy in them, and spread their legs inside. To do this, at the bottom there should be a rigid lining, so that it is keenly kept tightly.
How to decorate?
Bag can be decorated not only by fittings, but also various ornaments, decoupage technique, applique.
Decoupage technique will become an excellent decoration to the casual accessory. For this technology, you will need:
- Decorative napkin / decoupage card / printout on photo paper;
- Special adhesive for decoupage on the skin and textile;
- Flat brush;
- Fabric contour;
- chalk;
- wet wipes;
- Acrylic paint-based soil.
First you need to choose a place and drawing of napkins. The color will depend on the color of the bag.
The procedure is simple:
- Make a soil, let him dry a little.
- The second layer is applied to another color.
- The desired drawing is cut.
- Print the selected motive on the treated surface.
- Treat skin glue.
- Give everything to dry.
- In the iron drawing through the tracing.
- Coat with a layer of vitreic varnish.
- Well dry.
Application on the bag is a fashionable decoration that will make a bright object of any image from a simple accessory. Figure appliqués need to be selected before tailoring bags. The selected pattern can be manually sewd to the bag.
What skin will fit?
The choice of skin primarily depends on personal preferences, prices, properties of material and model bags. Softness occurs in many skin species. One of the softest options - calf leather. It is considered the highest quality and valuable.
Suede - not just soft, but also very durable. Like has softness. In general, soft leather materials are distinguished by special elasticity and grace.
Bags made of thick skin are sufficiently heavy, but at the same time they have a high degree of strength and long service life. Fat material comes out of domestic, buffalo, pork.
Economic options compared to genuine leather are leatherette products. . Modern technologies create sufficiently durable leatherette products. In appearance, it is sometimes difficult to determine whether a bag is made from the present material or not. Among the advantages of these models, the color gamut can be distinguished. Natural products will not give such color space. In addition, many designers create such accessories not only with high-quality, but also environmentally friendly. However, leathesies do not always have durability. In the cold, this material may crack, which cannot be said about natural products.
In contrast to the leatherette, models from a natural material. Such bags add status to their owners. They have a longer service life than leathes. But the bags of genuine leather have always a high price tag and, unlike artificial models, natural bags are heavy.
Select model
The choice of the model depends on the target for which the bag is purchased or sewd.
For those who often go shopping or used to carry a lot of things with them, a shopper bag is needed. Such bags have a wide roomy form. The undoubted advantage of such models is versatility. They are suitable for any clothes and are ideal for everyday use.
The material depends on personal preferences. Most often, the shoppers are made of leather and are deprived of lightning.
A bag or torch is a soft model of the bag, which due to its form has excellent capacity. Bags have a round bottom and closed with a braid in the upper part. Products can be made of cotton, jeans, suede, genuine leather and leatherette.
The belt bag is a beautiful and useful thing for a traveler and an athlete. Due to the fastener on the belt in such a bag, it is convenient to store the necessary valuables. Freedom of hand is one of the main advantages of such a product.
Master classes
Skin pieces bag
There is a large selection of bags. The original sample is a bag of skin pieces.
To create such a product, you will need:
- Skin pieces;
- Glue "moment";
- Sewing machine.
The scale of the product according to the sample will be 36x42 cm. The size of each piece is 38x50 cm. Such parts will be 2 of one color and two other. On each side, the part will be removed along the centimeter on the seams, it will take 5 cm on the bending.
The main assistant at the initial stage will be glue. It is perfect for working with skin. The glue is worth applying the edge of the thin line. After glue, you need to grab and only then you can start sewing. After the firmware, it should be slightly knocking on the seams so that their joints are flat and thin. Then go through the glue on the non-stitched sections and again begin the firmware from the outside.
It should turn out like this:
After the seams done, you must not forget to equate the details so that the lines are straight.
After all the work done with the details you need to fold two afternoon and strain them by forming a bag.
Handles of the bag are embedded in folding the top of the bag. These folds cut through the knife and the handle impregnated with glue is inserted. How the glue will dry out a bit, you can heat everything.
Bag for laptop
For this model, you will need zipper and leather (leatherette), as well as lining.
Sewing bags for a laptop of genuine leather consists of the following steps:
- First of all, it is necessary to determine the size that will be suitable for a laptop computer. It is recommended to use a laptop box to determine the width and length of the material.
- Next of the skin on the pattern, shown below, cut out two parts, given your parameters. In the first part for each side, it is necessary to retreat 2.5 cm on the seams. The second form will be larger than the previous one for 1 cm, as it will be an outer shell;
- As shown in the photo, the edges of the bottom and the front part must be drawn for rounding.
- Steadmer and rear halves.
- Then we approve the front part, laying the folds, as shown in the photo. Supleny cut off.
- Making pens.
eight
Photos
- Prepare zipper. If it is big, then cut off, and we melt the edge. It should also shoot a piece of skin.
- We feed the zipper to the planks.
- We turn to the cutting parts from the lining fabric (the pattern is the same) and sew them. For convenience, make pockets.
- We admonish the lining to the planks with zipper, while the free edge in the seam does not fall.
ten
Photos
- I cut the valve, insert the magnetic button into it and add to the bag. Also sew the handles.
- It remains to sew a lining to the leather part and insert the second piece of the fastener.
Cover with molding
We need tools for leather workers, paints, sponges and forms themselves - in this case, bugs (no higher than 2 cm). Of course, you need skin that can be molding.
On paper drawing pattern.
- We carry the pattern onto the cardboard and we plan on it the location of the beetles, which are then glued.
- A piece of leather with a large margin dip in hot water for several minutes for softening. Then we wipe, lay out on the cardboard and form beetles.
- Drying the product, it is cutting it out, cut out the holes for the handles and glit to the hardness cardboard.
- Mobile beetles, then the canvas itself.
- Processing ends.
- Empty in the beetles are resetting carefully by mounting foam or fill with syntheps and we rush with a cloth.
- We sew the details and put the fittings.
16
Photos
We offer another model to see next video.
Leather skirt bag
For this type of bag, you will need an old skirt, decor, glue, threads, scissors.
The bottom of the skirt needs to be resurrected, measure 1.5 centimeters, excess cut off. Linoleum can be used for the bottom. The bottom must correspond to the bottom of the product. Dno bags of leather. Skin pieces should exceed the bottom size of 1.5 cm. For the firmware, it is necessary to shoot three sides, retreating from each other 1.5 cm. In not stitched insert linoleum and close the remaining part.
The bottom is sewn to the skirt from the wrong side. Head of a narrow part of the bottom need to connect the side seams of the skirt. After equalize everything and lay the line throughout the perimeter. After the work done, turn out the products on the front side.
Pens can also be made of leather. It is possible to determine the length at your own desire. But do not forget about the allowances on the seams. Each handle must be collapsed from the offline inside. And stroke, retreating from the bend 0.5 cm, cuts on them better to be 1.5 cm on the inner side and flash. Pens to the bag are sewn from the wrong side. The seams are laid below.
Bag on zipper
Bag with lightning is built along the usual pattern of the standard model. One lightning causes many fear.
After the lining is carved, the sides are stitched, one non-sewn area remains, which is just necessary for lightning. The width of such a plot should be 15-20 cm. For the lightning processing, you will need 4 planks and 4 wrappers (2 upper, 2 lower), equal width of the bag.
Lightning must be seen by these pieces of fabric. And the remaining end to fix it to the lightning item. All items to flash on the typewriter. The resulting design must be attached to the bag. This process can be performed manually.
eight
Photos
How to make a machine without sewing?
Original leather clutch make without pattern and machine, but with original decor.
We need beads, a rectangle of Foamiran 18x9, naturally leather the size of 20x29 cm and the button for the fastener.
- Cut the skin segment, as shown below.
- Put the Foamiran between 2 leather sheets and glue to the inner sheet.
- We sew the bottom of the button, and the edge and the sides are wearing beads.
- The sidewalls at the bottom bend and chat.
- At the end of each sidewall, all layers are sewn. We close the cut beads.
- We sew the second part of the button and decorate to your taste.
17.
Photos