Sun skirt and folds with folds: how to sew, patterns, with which wearing, skirts on the coquette, on an elastic band

Sun skirt and half-length with folds come from Scotland. It was there for the first time the kilts appeared - the skirts of a free cut with folds. True, they were not intended for women, but were part of men's clothing. However, fashion does not stand still and soon wide folds with folds firmly took their place in the wardrobe of beautiful ladies.

One-cut skirts can differ radically from each other, thanks to a huge number of folds.

They may be:

• one-sided and counter;
• wide and narrow;
• straight, fan, bantle, asymmetric;
• can be located at the entire height of the skirt or be fired for several centimeters;
• Bowful folds are performed in chaotic order and are directed in different directions.

Who comes up?

Sun skirts and half-gravel to the fold are suitable for all women without exception. Lush, short skirt charmingly looks at the young fashionista.

A business woman will certainly appreciate the model of medium length with elegant shifted folds.

Such skirts are universal and are suitable for any style of clothing - from classic to sports.

Select the appropriate model is necessary, taking into account the characteristics of the physique:

• Women with a figure of a "rectangle" or "inverted triangle" should pay attention to models with small folds. They visually increase the hips and make a figure more feminine, and the form rounded;
• The owners of figures by the type "Apple" or "Pear" are suitable models with folds at the top of the skirt - from the waist to the hips. The tight upper part of the hip skirt will make a figure more elegant;
• Lush ladies with rounded, feminine forms are suitable for model with large folds, small and frequent folds give extra volume, so wearing such skirts are recommended to be very slender girls.

Stamps

On the coquette

Such a model allows you to effectively emphasize the Osin waist and create a beautiful, slender silhouette. Skirts, made of heavy, brilliant silk or light, gentle chiffon, especially spectacularly look.

On rubber band

Universal model, indispensable for hot summer. Gentle, romantic option for informal setting. For sewing such skirts are perfectly suitable lightweight fabrics, such as chiffon.

What to wear

Skirts Sun and half-grams - wide enough, so it is best to combine them with fitting riding: turtleneck, top, T-shirt, classic blouse, jumper, etc.

Very feminine - a skirt with a shortened jacket. As accessories, you can use long bright beads, chain, bulk scarf from fine tissue.

Lush skirts are perfectly combined with shoes on the heel. It can be classic shoes, wedge sandals, ankle boots or boots.

For sewing skirts, it is recommended to use soft materials that hold the form well - flax, cotton, wool, etc. The color scheme does not know the restrictions, but it is necessary to be gentle with the prints. The fold itself is a decorative element. In motley, a colorful skirt an element can "get lost." Therefore, most often such models are sewed from monophonic tissues, the cell is always relevant, the strip is allowed.

Sun skirt is sewn from solid cloth or wedges. The pattern of the first option is very simple - the circle of the required diameter is drawn and a slot for the waist is performed. There are no seams in this model, so it looks like the most magnificent and air. The half-half skirt is not so bulky, but it looks no less feminine and charming.

How to sew a half skirt?

To sewing such a model, it is best to choose a fabric that keeps the form well. In addition, the material must have the same properties in the direction of equity and transverse filaments. This will prevent the skirt pulling in the socks process.

For the pattern, it is necessary to remove the following measurements: from (waist girth), DP (transition length), dB (side length) and rear length (DZ).

For example, from = 60 cm.

The radius of the skirt is calculated by the formula: R = 2 * from / 6.28.

It is necessary to take into account the allowances for the fastener and folds, then the corrected formula will look like this:

R = 2 * (OT + X) / 6.28, where X is the size of the allowance. For each specific model, this value is different.

Suppose the selected model has 2 folds front. On one fold is laid by fabrics 2 times more than its depth. The depth of one fold is 3 cm, which means the overall width of one fold - 6 cm. Then the magnitude of the allowance on both folds will be 6 * 2 = 12 cm.

We take into account the allowance for a clasp - 3 cm. Radius = 2 * (60 + 12 + 3) / 6.28 = 23.9 cm.

Pattern drawing is performed:

1. The horizontal and vertical line are carried out. The zircule is put in place of their intersection and arc holds.
2. Next, on the pattern marks the lines of the middle of the front and rear panels.
3. The following are the location of folds and fasteners.
4. On the waist, 3 cm on the clasp, on both sides - 6 cm. Future fold will be located here.
5. From the sefing obtained, measure the distance to the middle line of the rear cloth and divide in half. The side seam will be held here.
6. Now you can make folds. From the middle line of the front canvase along the waist line to postpone 3 cm in both directions - the width of the future fold.

Tailoring Skirts Sun

To build patterns, the sun skirt with folds first need to determine the radii:

• The inner radius will be 1/6 of the waist girth plus 10 cm.
• The external radius is determined by the length of the future skirt.

You can not do the pattern, but immediately spread the fabric. To do this, fold the selected tissue fourly. Apply to its inner corner a centimeter tape and draw a chalk with a chalk along the tissue of the circle, then cut down the intended lines. Separately distribute the item for the future belt. Its width will be 12 cm, and the length should be the girth of your waist plus 5 cm.

Next, do this:

1. Cut another piece of belt from Flizelin any room to keep the future belt form.
2. Enclose phlizelin to the belt using the iron.
3. Fold the belt in half and join, and then for the wrong side, get into one edge of 1 cm and once again.
4. Slide on the outlet fabric space under zipper.
5. Lay the line by the inner radius of the main part of 5 mm from the edge. Put a major step, and loosen the bottom thread.
6. Tightening one of the threads, form a fold, evenly distributing them throughout the skirt. Missing the inner radius follows the waist girth plus 2 cm.
7. Sew the facial part of the belt, then enter the fastener, remove the skirt inside out and enter the involve part of the belt, closing the folds.