How to glue the background to aquarium? 29 photos How to stick a film on the back wall without bubbles? How to glue a decorative film at home?

Aquariums serve as an excellent interior item. If you pick up attractive and unpretentious fish, then the observation of their lives will be one pleasure. Usually, the aquariums are decorated with various plants and buildings, snapshots. Another way to improve its appearance is to stick on his back wall background.

Appointment of the background and methods of its attachment

Aquarium carries decorative purpose. The background will help not only improve the overall impression, but also hide the wall, wires and equipment for artificial reservoirs. Thanks to the pattern in the background, the space looks deeper. The background allows you to reduce the amount of light highlights on the water, gives the fish house a more natural look. If you choose the right image, the inhabitants of the aquarium will feel much more comfortable.

The background for aquarium is quite affordable and sold in most pet stores. The film allows you to quickly and easily improve or simply change the appearance of the container. Especially relevant to use such a decor in cases where aquarium is not tight to the wall. Usually this location causes discomfort among fish. Moreover, When observing the aquarium, the translucent room is too dispersed.

You can glue the background to the aquarium inside or outside the back wall. The inner looks much natural. It is important to use a product from an environmentally friendly, non-toxic material. The background is installed inside the aquarium before water is poured there. It is important to consolidate it qualitatively so that it does not fall on the fish.

Typically, the inner background is represented by bulk panels from polyurethane foam. Various natural textures are used, such as a stone or tree. Clean such backgrounds are necessary, but this process is quite time consuming. It should be borne in mind that such a design is slightly reducing the volume of aquarium, as well as any internal decor.

.

External background is more common due to its availability. There are fewer requirements to the material, because it does not contact with water and the inhabitants of the aquarium. For fixing, various adhesive compositions or simply tape are used. The advantage and that Such a background does not determine the growing algae. Films are sold in a very wide range and can be both monophonic and multicolored or with drawings

Modern backgrounds for external sticking can have a 3D effect. Lack of film only in a difficult replacement. If the adhesive decor is used, then it will be quite difficult to remove it. It is better to think good the desired result before drawing up the back wall.

How to prepare glass?

Usually, films are used for decorating, which are attached to the outer part of the back wall. Glass should be carefully prepared to decorate the procedure to get a really attractive result. If the aquarium is new, then just reduce the rear wall and degrease it.

Preparation of glass in case the aquarium is used, is carried out so.

1. Reliems fish into a suitable capacity.
2. Drain the water and get all the decorative elements, soil.
3. Rinse the aquarium in the usual way.
4. The outer side of the back wall is treated with glass washing. You can use another cleaner. The main thing is to clean the surface from dust, dirt, fat.
5. Seeing it with paper towels.
6. Immediately proceed to the decorative background with a decorative background so that the glass is not covered again with dust.

Necessary materials and tools

Setting the background for the aquarium with your own hands literally 10-20 minutes depending on the size of the tank. To perform work, you need to prepare such materials.

1. Decorative sticker or panel . It is better to choose a self-adhesive film option.
2. Scissors, ruler and pencil. All this will help cut the workpiece of the desired size.
3. Glycerin or liquid soap For the preparation of the solution. The first option is needed when fixing the film without adhesive layer. Soap water will help beautifully glue self-keys.
4. Plastic card . Used instead of a spatula to smooth out the material.
5. Soft rag without a pile . To wip the glass you need to use such a flap of fabric that will not leave dust or garbage.

For working with glycerin, you need a brush. Moreover, it must be advantageously clean from possible sarneas. If a soap solution is used, then a pulverizer is needed. Under the aquarium is better to upset the fabric or film.

It is important to equip a place for such work as comfortable as possible.

Step-by-step instruction

Properly stick the background for aquarium at home is not as difficult as it may seem at first glance. Do not rush to not to redo work.

1. Believe the back of the aquarium and draw the contour on the decorative vinyl film. Sharp scissors cut the blank for decorating.
2. Before sticking, you need to trim 3 mm films from 2 sides.
3. Wipe the dry glass of the rear wall of the aquarium. Take the sprayer and prepare a soap solution. You can use both shampoo and the usual liquid soap for mixing. Mix well everything to form foam. Thoroughly spray the glass on which the film will be pasted.
4. Remove the protective layer from the decorative self-kept. Attach the background to the outside of the wall of the aquarium.
5. If the first attempt turned out to be unsuccessful and the film fell not exactly, simply try again again. This will make it easily due to the soap solution on the glass.
6. Align the top edge of the film.
7. Call someone to help, act further alone will be quite difficult. It is necessary to pull the lower part of the background so that it is not glued. Neat movements need to gradually massate the vinyl film using a special spatula or plastic card.
8. You need to act with pressure. The film will not deteriorate from this, and work will go faster. Movements should go from the center to the edges, from the top face to the bottom.

The basic way provides for the use of a film with a sticky base. However, it is possible to decorate the aquarium using the usual stationery tape. The method is quite simple, but short-lived. The overall impression of the background will be cleaned when water gets. The easiest option of using the background without glue.

1. Decipherate wall surface.
2. Attach the background to the aquarium and align the top edge. Secure with scotch.
3. Neat movements smooth out the material on the book and on the sides.
4. Attach the remaining 3 sides of the scotch.

A flexible background without a sticky layer can be fixed using conventional glycerin, which is sold in pharmacies. Mineral oil is suitable as an alternative. You need to act like that.

1. Secure one edge of the decorative picture on the wall of the aquarium with the help of a scotch.
2. Cover the glass glycerin. Apply a means is comfortable with a brush or hands. In the first case, you will definitely qualitatively clean the tool from the villi and dust.
3. Gradually press the background to the wizard surface.
4. Using a spatula or plastic card, arrange all irregularities.
5. Surplus glycerol need to wipe the towel or paper napkin.
6. For reliability, curse the edge of the scotch.

In most cases, the background is glued to the outer side of the aquarium, however, it can be placed inside. It is noteworthy that the material should be more dense. Silicone sealant is used as glue. The same material is used to glue the glasses of aquariums.

Recommendations

To create a beautiful aquarium, you can stick an attractive background to the back wall. Simple tips to help perform the task as high quality as possible.

1. If you want to stick the film without bubbles, then you need to carefully treat dust as carefully. Even a small amount of it on the glass is able to reduce every effort. Moisten everything near the place of work with the help of the pulverizer so that Sor does not fly to the film.
2. If air bubbles appeared after sticking, then it is necessary to drive them with the needle and plastic card. And it is better to take a sewing needle, but a thin with a syringe.
3. It is better to try on the background to the aquarium before removing the protective sheet with the adhesive base. If the aquarium is large, then it is necessary to fix the background with the help of a tape, and then sample parts.
4. It is important that the film fits most closely to the glass. Otherwise, darkened spots will be visible. It looks particularly bad when the artificial lighting is turned on in the aquarium.

On how to glue the background to the aquarium, look in the video below.