Dryer for dishes is the necessary thing. When choosing, it is important to pay attention not only to its operational and aesthetic qualities, but also the size. In modern conditions, people have the opportunity even on small-sized kitchens it is interesting to beat the kitchen interior and place multifunction cabinets. All this must be borne in mind when choosing a dryer for dishes.
Standard parameters
As a rule, most dryers are intended for accommodation in the upper lockers, and therefore their dimensions are dictated by furniture. Depth often remains unchanged - 22-25 cm. The following sizes include standard:
- 500 mm;
- 600 mm;
- 700 mm;
- 800 mm.
If the dryer is mounted in the lower lockers, its width is also determined by the parameters of the container, but it is usually smaller than the width of the "upper" options. So, in this case, dryers with dimensions 400, 500 and 600 mm are mainly offered. Sometimes 300-millimeter copies are available.
If the depth of the module is more standard, then, as a rule, the free space is filled with built-in home appliances. This is also worth considering, picking up the size of the dryer.
Non-standard options
Shops and furniture companies offer and unusual solutions for dishwashes. In this case, the dryers can be angular and door. Features of angular tumb, lockers and the door determine the dimension of the product. The difference between two different sizes can be 50 mm, whereas in standard models this difference is 100 mm. Therefore, the size of 300, 350, 400, 450, 500, 550 and 600 mm can be attributed to non-standard options. Naturally, it all depends on the specifics of the kitchen headset.
There are other interesting solutions that can perform not only their direct functions, but also to be part of the interior. These include, for example, miniature satellites that sometimes refer to Troflex.
These designs are also single and bunk. Economic departments offer such options with pallets and without them, some copies are equipped with compartments for cutlery. There are open wall patterns, they can be standard and non-standard sizes. These products are suitable for those who do not like moisture accumulations in a closed module, as this leads to a quick damage to the material.
Thus, there are many models with classic and unique sizes in the market, and when choosing an embedded dryer, it is important to consider only depth.
How to pick up?
Before you start choosing the dryer of the desired size, you need to consider a number of moments.
- To pick up a construction in a closet 40 cm You need to choose an angular copy. If you take a direct product, then it will be possible to place only a couple of plates and mugs, the corner option is spacious, and therefore it will allow twice as many dishes. If you mount two shelves, it will look too massively.
- For a cabinet 50 cm 2-level or angular dryers are suitable. But make sure that there is a sufficient distance between two tiers for placing a large diameter plate. Sometimes it is convenient to put such wide plates in a separate place than specifically to pick up the drying.
- The most preferred option is a design of 70 cm. It is convenient and allows you to place quite a lot of plates. It is recommended to give preference to models with a removable bottom so that there are no problems when cleaning.
- If 80 cm dryer is selected, This should be a product from very durable material. Such an instance allows you to place a lot of dishes, and under the severity of several dozen plates a wooden chlipsky unit can collapse.
As soon as the appropriate option is selected, it is necessary to take into account other features of different dryers.
- Houses Thoroughly measure the distance inside the cabinet from one wall to another and be sure to depth. If it is a 2-level dryer under plates and mugs, then keep in mind that there should be a distance of 30 cm between the tiers, and between the lower level and the pallet - 7 cm, then the flowing water will be fully assembled.
- Do not place two levels in such a way that the plates are dried on the top, and on the bottom - mugs. This is contrary to sanitary and hygienic standards, as water from the dishes will be fluffing into the circles. In addition, with a high locker lockers, it is more convenient to get a mug than a flat plate.
- Be sure to choose a model with a tray to collect moisture. Prefer the samples with the most spacious pallet are more functional options. It is more convenient to use a removable pallet, you can always merge the accumulated water and rinse the design. Recently, transparent plastic specimens are relevant, they are easy to wash, and they are not deformed under the influence of moisture.
- Choose stainless steel products with chromed coating. Such constructions have a longer service life.
- Returning to the sizes, it is worth noting that the width of the unit provides for the width of the wardrobe walls, which means that it is less than 32-36 mm in fact. Consequently, picking up the dishwasher, it is worth examining the labeling and information about how the thickness of the chipboard is intended to be an instance.
Nuances setting Dryers of different sizes
During the installation of the dryer for the dishes, it is important to comply with some simple rules.
- The distance between the two tiers should be at least 300 mm.
- If it is a 1-level drying for plates, it is recommended to mount the cabinet in the middle. This will ensure large-size dishes.
- Consider that each copy has its own strength, and the overload threatens the rapid failure and destruction. Thus, the 40-centimeter design allows you to place no more than 12 plates, the dish of 50 cm is about 15 plates, 60 cm - 18 pieces, and 80 cm - 28 plates.
- By installing the dryer of any size, remember that the place is required under the pallet. The gap between the pallet and the lower level should be 7 cm.
- Consider the fact that the cabinet doors must be closed without effort, the dryer and the tableware standing in it should not interfere.
In many homes, dryers for angular upper cabinets are relevant. With the form of the design resembles the front traditional dryer, but it has an additional full-size part.
Inside the cabinet, an instance is mounted in the form of the letter "g". This option is good because it allows you to qualitatively and fully use the corner space of the cabinet, that is, the traditional frontal design would allow the minimum number of plates in the angular cabinet. However, when using an angular dryer, access is slightly complicated by a narrow facade. So, with the dimensions of the corner cabinet 60x60 cm, its facade width is only 40 cm.
Of all the above, we can conclude that the dryers of certain actual sizes are suitable for different wardrobe dimensions:
- 40 cm - 35x25cm;
- 45 cm - 41x25cm;
- 50 cm - 46x25cm;
- 60 cm - 56x25cm;
- 70 cm - 66x25cm;
- 80 cm - 76x25cm.
Copies up to 60 cm are suitable for retractable Tumb, but 80 cm dryers are designed mainly for stationary cabinets. In fact, the specificity of the installation of a standard bunk dryer from the size of the design itself does not depend, but it is important to take into account other factors associated with its parameters. The classic drying has a depth of 28 cm, respectively, it is suitable for the cabinet of the same or larger size. So that all the mugs are easily placed, It is important to measure the height of the highest glade, and take into account this distance when installing the upper tier. At the same time, do not forget about the gap, which should be 20 mm.
It is important to take into account the growth of the owner of the apartment, which will most often enjoy the dryer. At this moment, it is not necessary to stop in detail, and it is clear that for a low-spirited person, the upper tier must be mounted on the minimum permissible height, and for high mug people should be located at the height of the raised hand. Another important dimensional criterion during installation is the height of the cabinet itself. So, despite the popularity of such structures, In a closet, a height of less than 480 mm is not recommended to install a bunk drying. It is inconvenient and easily looks.
When installing the product in the cabinet inside there should be an exhaust hole so that unpleasant flavors and moisture are not going to, and the dishes were well ventilated. If the cabinet does not provide for the moment, you can mechanically drill a pair of small holes to maintain a steady air flow.
Modern models of kitchen headiturists provide for the presence of hinged lockers without the bottom, that is, in fact, the bottom is the pallet where the drops from the dishes flow.
In the next video you will find installation of an embedded dryer for dishes in the kitchen cabinet.