When repaired in the restroom, the question of the change of plumbing often arises. The choice of the right toilet is a rather painstaking lesson. Special attention should be paid to the release of the acquired model, otherwise the installation process may be difficult or not possible. This article will consider the toilet toleas with oblique release, and also given recommendations for choosing a suitable model.
What it is?
Unitaze releases three types: vertical, horizontal and oblique. The latter is the most versatile, as it can be connected to sewage located in relation to the toilet in the framework of from 0 to 350 degrees. For the first two options for "liberty" in the connection are not possible. In addition to the convenient way of mounting, the toilet with oblique intake has a number of advantages.
- Located under the tilt Creates the smallest resistance when passing through it fecal masses, and therefore, much less often the other models requires cleaning and very rarely clogged. This is a very important plus. In the installation of sanitary products, as a rule, try to avoid straight corners. An experienced plumber is unlikely to make a drain at an angle of 90 degrees, it will put 2 knees and divide the angle on equal inclined areas in 45 degrees.
- Installation of toilet with oblique intake It is so simple that can be implemented independently, subject to the presence of a small experience with plumbing and the necessary tools.
Views
Toilet bowls with inclined wheels, like others, are divided into several types in the form of a bowl.
- With an angular shelf. They are different called dish. Such a form of toilet bowl has a shelf in the design features, which is in the deepening. This creates certain difficulties when using and hygienic cleaning the product. The fact is that life activity can remain in these constructive places and cause unpleasant odor due to the distribution of microorganisms. Also, it will also have to use the heroes much more often to clean the shelf from fecal masses. But the main problem of such models is the shape of the bowl contributes to the permanent stagnation of water, as a result, the formation of lime pollution, urinary stone and even rust. Complete hygiene of plate toilet bowls indirectly leads to more than other models, water consumption. However, models with an angular shelf have a weighty plus - the complete absence of splashes during washing.
- Funculent toilets. The bowl in such models is a funnel. It is characterized by the highest hygiene and efficiency indicators, since with minimal water consumption, life products are not stuffed, immediately climbing into the sewer. As a result, there is no unpleasant smell, there is no need for the use of detergents. However, the model has a significant disadvantage - the formation of a large amount of splashes during water drain. Fortunately, the anti-tape system, which is equipped with most modern toilets, solves this problem.
- Tilt toilets (visor). In this type of product, either the rear, or the front wall has a pronounced slope that allows you to fully block the appearance of unpleasant odors. All solid waste immediately fall into the water and are carried out into the sewer.
However, the purification of the visor toilet with the Yershik can still be required.
The type of drain on the toilet bowls with oblique release is so.
- Cascade. Drain of water in such a model is realized due to several holes located under the rim of the toilet. Thus, a uniform cleansing of the entire bowl is achieved.
- Vertical. Drain is carried out only at the rear wall of the product. The least economical and efficient type of drain.
- With sharp drain . When washed, water comes under high pressure, and the increased volume of fluid quickly removes waste into the sewer. This type of flush is very economical.
Typical dimensions
On the toileties, as well as on other plumbing products, certain GOSTS operate. However, in modern conditions increasingly manufacturers are guided by technical conditions (TU), So, 2 identical to the toilet functional one manufacturer can differ significantly in size. But it only plays the buyer's hand, because it is possible to choose a product of almost any size under its individual needs. Here are some sizes of modeling models.
- Outdoor models CD for installation in the corner . Perfectly suitable for installation in very small toilet rooms or in combined bathrooms. Used in order to save useful space, as very compact. The dimensions of the model (width, height and length) - 34-37 cm at 40 -42 with a length of about 80 cm.
- Toilet bowls with a built-in tank. Such models are often used in toilet rooms performed by an individual design project. A drainage tank is located behind a false wall of plasterboard, less often plastic. This installation of installation allows you to visually facilitate the space. Although in fact the facilities of the false wall steals a useful area. The length of the bowl is 46-49 cm, the width is 35-37 cm, and the height is 38-41 cm.
- Suspended models with installation . These toilets consist of 2 parts, one of which (drain tank) is inside the wall, and the second (bowl) is suspended against the wall. Over the partition is a durable metal frame, the toilet is mounted on the pins. Bowl width - 37 cm, length - 45 cm, and height above the floor - 38-41 cm.
- Children's models . Such toilets, as a rule, are installed in the presence of a large number of children and an additional bathroom. The dimensions differ depending on the child's recommended child, which will use the product. Sizes in such models, naturally, less than in adults. Children's toilets with the following dimensions are most popular with buyers: width - 26 -30 cm, length - 37-39 cm, and height from 30 to 40 cm.
Most often, such toilets are a monoblock.
- Large-sized models. The name speaks for itself. The dimensions of such toilet bowls are perfectly suitable for large or high people. There are such models only in large toilet rooms, there will be little space in the standard for them. Such products are very difficult to find on sale, because they are not in demand.
Materials and colors
The most popular in the production of toilet bowls are two types of material:
- Sanfayans;
- Sanfarfort.
Sanafayans is made of clay with the addition of quartz. The material has a porous structure, so it is mandatory to be glazing. This allows you to significantly reduce its coefficient of moisture absorption, and therefore increase the service life of Plumbing from Fayans. In addition, care for the product is simplified, as it does not absorb smells and pollution. A high-quality faience toilet is sometimes not so easy to distinguish from more expensive porcelain models than very often undisguised sellers.
Therefore, to acquire plumbing products better in large specialized stores.
The pros of Sanatayans can be attributed to:
- low cost;
- resistance (thanks to glazes) to pollution and aggressive chemicals;
- The service life of the faience toilet is 30 years;
- Easy to care.
The only disadvantage can be called fragility of products from this type of ceramics. Porcelain toilet - a real sales leader. Most of the popular foreign plumbing manufacturers prefer this material. It consists of 60-70% of the coaline, the rest in its composition is Spate and Quartz. The advantages of sanoparfor units can be attributed to:
- durability - service life is 50 years;
- Easy to care - not afraid of chemicals in cleaning;
- does not absorb unpleasant odors due to the perfect smooth structure;
- very racks to mechanical impacts and shocks;
- Does not absorb water, which means that the likelihood of the formation of blades and a limestone.
Only their high cost can be attributed to the disadvantages of toilet bowls from the porcelain.
Rating the best models
Toilet bowls with oblique release - the most common model. Such a configuration is universal, which means not only Russian, but also imported (Swedish, German, Italian) toilet bowls are manufactured with this type of issue. Judging by the reviews, the following brands of toilet bowls are most popular.
- IFO FRISK. This is an outdoor model made of faience. Feature - the presence of microlift, which significantly increases the comfort of using the product.
- Jika. Power toilet Lyra is not equipped with a microlift, however, has a funnel decay and a very attractive cost for a product of such a configuration.
- Santrek. The peculiarity of this standard toilet is the presence of the Anti-Spex system.
- Sanita. Luxe Classic model is equipped with a microlift seat. Production material - porcelain.
How to choose?
When buying a toilet with an inclined corner of the issue, follow the following recommendations.
- Examine information about the manufacturer and product quality certificates. Many European manufacturers, for example, from Germany complement their plumbing products an extended warranty.
- Decide. This is especially true for small toilet rooms, as well as for model toilet models with a tank embedded in the wall. Sometimes the entire pair of centimeters may not be enough for the installation, so the dimensions are one of the most important parameters.
- Decide material and color. Of course, white products are universal and are suitable for any interior. However, color models are presented in the modern market, which make up good competition with the usual classics. The product can be perfectly fit into a modern bathroom or toilet room in Loft styles, Pop Art, Provence.
- Make up all the "requirements" to the toilet. Do you need a microlift or without it you can do? Whether the heated seats is needed, and maybe the equipment is needed by the anti-speck? Are the furious models interesting in order to simplify hygienic care? The more items will be reviewed, the easier it will make a choice directly in the store.
Toilets with oblique release are popular and will remain the most bought in the world for a long time. They are universal, and a large number of manufacturers and models will allow you to choose a suitable product not only in appearance, but in price.
Tips for choosing toilet bowls with oblique release are given in the following video.