Interior design by any bathroom is completed with the installation of the mixer for the sink. This plumbing device must be not only beautiful, harmoniously combined with the overall style of the room, but also have certain operational properties. Since the mixers are presented in the plumbing market with a chic assortment, to their choice need to be treated with a special responsibility, preferring well-proven trademarks, otherwise avoid faults and the flooding of neighbors will not succeed.
Peculiarities
The mixer for sink in the bathroom is a sanitary device, due to which the water supply is adjusted for the required temperature. In addition to its main purpose, the mixers have the ability to send streams to the shower watering can or ister. The first sample of the crane for the washbasin was invented by Lord Kelvin at the end of the XIX century Since that time has passed many years and its design has become much perfect.
The bathroom faucets differ from ordinary cranes in that equipped with the function of adjusting the temperature of the water, this is their main feature. The design of such cranes consists of fastening screws, coarse sleeves, covers and spindle. In addition, the manufacturer complies with the product with a handle, glanted pads with a saddle holding nut, gaskets and a spout.
Mixers may differ in size, design and manufacturing material. Their price depends on these indicators. To date, you can find both elite and budget models.
Review of species
By purchasing a mixer, you should pay attention to different technical factors, especially this concerns the methods of fastening (mortise, embedded) and the nature of pipe laying (horizontal, vertical). The wall crane is attached directly to the wall, and the mortise is installed in a special hole on the sink. The size and form of fixture play a huge role. The high and large mixer looks good in the interior of spacious bathrooms, for small rooms, it is best to choose compact models with movable spout.
By type of management
Manufacturers most often produce valve, single-art, sensory cranes and thermostat mixers. Each of the above species has both pros and cons.
- Single-art (one-hand) models are the most common because they are available in price, easy to use and durable. As for the shortcomings, it is worth noting the complex repair of the internal mechanism.
- Cranes They are considered the most fashionable, as they fit perfectly into modern bathrooms. In addition, they can be used in any water pressure, saving its consumption. The only thing that such mixers need to constantly replace elastic gaskets, as well as models with a ceramic valve are not suitable for feeding rigid water.
- Thermostatic mixers It appeared on the market quite recently, but already managed to establish well to establish high performance qualities. From classic options, they are distinguished by an unusual design. The design consists of two handles, one of which is responsible for controlling the pressure of the jet of water, and the second is for the desired temperature. In addition, the taps have a built-in thermostat. Advantages of fixtures - water supply does not depend on pressure in the general system, stylish look, operation of operation. Disadvantages - high price if there is no stream in one of the pipelines, the crane stops fully operation.
- Special attention deserves and Touch mixer which is a new technology. Unlike its usual "fellow", it does not have in the design of levers and valves, and its design is made in the style of minimalism. The operation of contactless cranes is carried out due to the presence of an infrared sensor in the design, which instantly responds to movements. To power the sensor, power is needed. The advantages of this type of cranes are reliability and safety in operation. Disadvantages are possible difficulties with a set of large water volume, a frequent change of fluid temperature and quite high cost.
On the form of a spout
The mixer mounted for a washbasin in the bathroom does not have too long expulsion, which distinguishes it from kitchen species, so its tubes are usually released with a round cross section. There are also triangular, rectangular and oval. In addition, manufacturers also produce a plumbing device with G-, C-, S-, R- and J-shaped tubes.
By Montaja method
Usually plumbing devices are installed on the bottom of the hole located on the tabletop or the sink itself. This is the most common way of installation. Stiletts are used to attach the crane, the fitting of flexible hoses are screwed to its bottom. Some models of mixers made in stylistics "under ancient" are mounted on three holes in the washbasin. In this case, the faucet and its node is located at the bottom of the sink, the twisted - at the top of the center, and the handicrafts - on the sides.
Wall-mounted installation method is greatly popular. It is performed when the arrangement of the sink allows. In addition, the wall installation requires a special approach - in advance in the hidden wall it is necessary to carry out pipes. Despite the labor-intensive installation, such mixers look very impressive.
Materials
The durability of the use of mixers largely depends on the quality of the material from which they are manufactured, therefore it is important to pay special attention to this indicator. For example, Many are conducted on cheap cranes with a silhouette case, as they look beautiful and available in price. But, besides aesthetic species, there are no other advantages from such products. These are economical faucets, Chinese production, they serve a very short time.
Silmina is an alloy obtained from aluminum and silicon. It is characterized by instability to oxygen corrosion, fragility and lack of plasticity. Therefore, siluma cranes do not withstand high pressure and after installation require repair, which is difficult to perform.
Completely different level of quality in stainless steel products. They have durability and easily cope with high pressure in the system. Stainless steel faucets securely serve more than 10 years. The only thing that needs to choose products from proven manufacturers and give preference to models made of high-grade AISI 304 steel brand are preferred.
In addition, you can find cranes for baths made from other materials.
- Brass. Mixers additionally cover the chromium layer, which increases their wear resistance and service life. Thanks to the brass coating, it is difficult to distinguish brass cranes from the silhouette and steel. The only thing that the latter has a lot of weight.
- Copper. It is considered to be a good material. Mixers made of it provide themselves with a reddish or yellowish tinge in places of holes for connecting to hoses and mounting nodes. Copper cranes from above, as a rule, are not covered with chrome, as the noble color of copper gives a plunthlicate to a special look. Copper mixers look elegantly in combination with a housing decorated in retro style.
- Bronze. This is a noble material that does not need external coverage. The bronze alloy is highly resistant to corrosion, the only thing that, with hydraulic and external mechanical damage, its strength is low. Bronze cranes usually serve more than 10 years.
- Plastic. This is the most common material that can often be seen, designed for artificial stone and under the "chrome". Plastic products refer to the most affordable, but specialists do not recommend them to acquire, although the products are presented on the market in a huge assortment, do not be corrosion and have low thermal conductivity.
- Ceramics. Plumbing devices from this material are distinguished by resistance to chemical substances, reliability in operation and pleasant to the touch. In addition, ceramic cranes look stylish in the modern interior. The lack of products - do not tolerate temperature differences and physical impacts.
Cheap cranes with a sharp switching of water from a hot flux to the cold can crack in their hands. Another minus of such mixers attributes a high cost.
Colors and styles
By purchasing a mixer in the bathroom, it is also important to pay attention to its stylistic design, which should harmoniously fit into the interior of the room. For example, a two-fledged crane made by "under ancient" will be ridiculous to look in the design set down in minimalism. An ideal solution will be the installation of a colon of a single color with a sink. If you need to add an originality to the interior of the bathroom, then designers are recommended to give preference to several unusual cranes models.
- Products complex forms. They are able to fill the room with interesting notes, smoothing the rectinence of other decor elements. The most popular and practical option is the mixer combined with a heated towel rail. Some manufacturers also offer ready-made sets in the form of design shells for a bathroom with built-in cranes.
- Minimalism Mixers . They are distinguished by simple forms and conciseness. Their design is convenient and easy to use. It is a handle with a swivel valve installed next to her. Color can be both white and black.
- Loft cranes. Such options are plumbing devices made from natural materials. There is no decor and bright colors in their design. A chic selection is considered sensory type devices. They are practical and occupy little space. Brilliant cranes look beautifully and on the background of a rough shell of natural stone.
- Faucets in retrostile. Such decisions are considered the most colorful because they differ in the vintage loop. Most often, the models are made with imitation under copper and bronze. They are equipped with artificially aged cranes and curly handles. In order for such plumbers to fit original in the overall interior of the room, it needs to be equipped with an appropriate style of furniture. Especially interesting looks in retrose black mixers. They will become a central element of space.
As for the color decoration, the most popular is considered "brilliant chrome" and "polished nickel". These shades are the favorites of many designers. "Brilliant chrome" fills the room with home heat and comfort, and "glossy nickel" gives the design of luxury.
To ensure a bright contrast, you can use a combination of snow-white faience with "French gold" plumbing devices. "Golden" cranes will complement the design of refined sophistication.
Rating the best models
To date, the plumbing market is represented by bath faucets from various manufacturers, but recognized leaders are Finnish, Italian and German brands. Consider the most popular models that have proven high quality and stylish views.
- GROHE EUROSMART NEW (Germany) . The crane from the German brand GROHE is equipped with an automatic "bath-shower" switch and a convenient temperature limiter, which ensures safe use of the device. The mixer is covered with a chromed layer, which prolongs its service life. The product is unpretentious in care, but it is expensive.
- Hansgrohe Logis 71400000 (Germany). The crane is decorated in a modern style. Since the material manufacturing material is brass, it serves for a long time. Such mixers can be used together with flow water heaters. Price available.
- ORAS NOVA 7446X (Finland). The outer body of the crane is made of brass, which is characterized by corrosion resistance and low thermal conductivity. A comfortable outflow length provides comfortable use of both the bathroom and a washbasin. The kit also includes decorative reflectors, allowing the interior of a particular chic room.
- Jacob Delafon Elevation E18870-CP (France). This is a two-fisted crane with fixed spill, which is installed in one hole. The color of the product is "chrome", manufacturing material - brass. The advantage is a modern appearance, easily inscribed in any design room. Disadvantage - above average price.
- Set of "Sofia" faucets (Russia). This is a set of equipment designed for two waterproof points. The bathroom faucet is spilled with a circular cross section and a holder for shower watering can. To change the mode of operation (expulsion / shower), it is enough to carry out a rotation using a special switch located on the end of the housing. As for the shower watering can, it connects to the stacker. Disadvantages - no.
How to choose?
Since the bathroom faucets are presented in the market with a huge selection of models, then it is quite difficult to make the right choice in favor of this or that product. Specialists recommend purchasing cranes that simultaneously have functionality and stylish views. In addition, it is important to take into account a few moments before purchasing the device.
- Production material. Special attention should be paid not only on the quality of the case, but also clarify what the handles are covered. Excellent reviews got taps from brass. They are the most reliable in operation.
- The size and weight of the mixer. If the plumbing device is light, then it is best to give it to its acquisition. The walls of such a crane may be too thin and fragile, so it will quickly fail. For a small room, you need to pick up one compact set consisting of crane and shower. It will be convenient to use and harmoniously fit into the interior. For spacious premises, you can buy a large crane with two handles.
- The presence of aerator. This is an important component of the mixer, which is a mesh nozzle at the end of the design. It provides water jet dilution with air, after which it seems more dense. Thanks to the aerator, consumption and water pressure will be less. Especially important is the presence of this component for the invoice model of the crane.
- Additional equipment. It is advisable to choose products that have additional details, it makes them more functional. Most often, manufacturers are equipped with taps by adapters for mounting to the wall, cartridges, decor elements and additional hoses.
Important! It should be paid to the fact that the mixer and sink harmoniously complemented each other. To do this, buy objects from one collection, which will also facilitate their installation.
How to choose a mixer, look next.