Due to its operational properties, the mixers with long spill for the bath are in high demand. Like all such plumbing devices, they perform several important functions. This in this case goes both about the supply of water and about adjusting the temperature regime.
Peculiarities
All existing plumbing devices for baths differ from each other with several signs.
In the situation with the mixers, it can be about the following moments:
- Water opening method (feed);
- the presence and appearance of the spout;
- List of additional functions.
In models equipped with the spill, water is fed through a special tube that has a circular or rectangular cross section. Faucets with long spouts for the bath are primarily characterized by functionality. Modern models are equipped with hoses and waterboards.
In addition, their design provides for the presence of feed modes switches.
Cases in which long extensions have an explicit advantage over short. As practice shows, the choice of plumbing, taking into account only the design of devices, does not always become correct.
The optimal option is a long "hussak" will be in certain situations.
- If it is impossible to supply water to the sink and the bath can not do without a mixer with an elongated expulsion.
- The corner headed the cost of the bathroom equipment. This refers to the installation of one crane instead of two plumbing devices.
- The mixer in the future will be used during washing and will relieve the owner from the need to keep the weight tank in the process of filling it with water.
- Little children or animals live in the house (apartment). Long "hussaki" allow you to change the direction of the jet of water in the right place.
- Residents prefer to wash different parts of the body precisely under the crane, and not the shower. Similarly, it is possible to save time and reduce water consumption.
- The bathroom has a large and deep shell for washing, which will not be able to reach a short crane and provide comfortable conditions.
In addition to the listed competitive advantages of the device under consideration, attention should be paid to another important point - the models equipped with the upper shower are maximally comfortable in operation. It is important to remember that One mixer for sink and bathroom will function for two . Based on this, it is necessary to pay special attention to the quality of the sanitary appliance. You should also not save at the services of professional plumbers when installing cranes.
As you know, there is nothing perfect, and the mixers with long spouts are not in this case an exception. The main disadvantages of such structures primarily should include relatively low tightness.
Also, not in all cases it is possible to install such models. Examples are situations with shower cabins and sinks located far from the baths.
Review of species
The modern market presents more than a wide range of described plumbing. These devices can be with a shower or without, and also differ from each other with control systems. Conditionally, two large categories can be distinguished - these are two-dimensional and single-art models. It is not necessary to talk about universal mixers, because in each particular case the choice will depend on a number of criteria.
Two-dense
These models can be bolded to call traditional and useful deserved reputation. Their main characteristics and competitive advantages include simplicity of design, ease of operation and affordable cost.
In this category, two types of mixers can be distinguished.
- Worm faucets having a shut-off cuff (most often we are talking about silicone gaskets). Their main advantages are reliability, simplicity of maintenance (gasket replacement), relatively low cost. The minuses include some inconvenience of use. To open the water, it is necessary to turn the valve several times, and the temperature adjustment process requires certain time costs.
- Ceramic models , the mechanism of which includes two plates with holes. One of them is connected to the rod, and the second is rigidly fixed in the mixer housing.
The list of advantages of ceramic products includes ease of use, increased strength and long service life. To open water and adjust its temperature, no effort is required.
Naturally, it did not cost without explicit deficiencies, which include:
- The dependence of operational qualities of water quality - due to sand and various solid impurities, wear of parts of the mechanism is significantly accelerated;
- Problem problem - As a rule, the crane is much easier to replace assembly;
- The need to install coarse filters To extend the service life of the mixers.
In accordance with numerous reviews of owners and professional plumbers, the choice is best to do in favor of ceramic models. However, the water pressure in the system should be taken into account. With insufficient quantity of the supplied fluid, the rational will be setting devices with worm crane buxes.
Determine the type of mixer can be simply rotating the handle. Ceramic devices have an angle of turning from 90 to 180 degrees.
Single-art
The popularity of these cranes is actively growing truly by a record pace. Their main distinguishing feature is the maximum simplicity of operation.
Now there are two types of single-art mixers in the plumbing market.
- Models with a metal ball aboard having three holes. Their main advantages are increased tightness and durability. The main minus is the sensitivity to the quality of water. The presence of lime deposits as the consequence of long downtime can significantly complicate the use of the device.
- Cartridges equipped with cartridges and having ceramic plates with water supply holes.
Speaking about the advantages of mixers with cartridges, you must first of all mention the simplicity and long service life. Of the minuses, consurability of water quality and relatively high cost are special attention.
Thermostats
Such models still have the status of innovations of the modern market of sanitary devices. However, taking into account performance, experts rather highly appreciate their prospects.
Taking into account the features of control systems, three categories of thermostatic mixers can be distinguished.
- Mechanical Manufactured using handles, levers or regular valves. It is worth considering that the main advantage of such a thermostat is the lack of dependence on the power supply.
- Electronic - devices equipped with LCD displays and touch or keypad control. These thermostats work from the battery or household network. The electronic system allows you to set water flow parameters with maximum accuracy. Minus is a dependence on power availability.
- Contact - Thermostats equipped with IR sensors and are today the most comfortable in use. Special thermostators and devices controlling the parameters are responsible for changing the parameters. All user settings makes it even before the water is turned on.
The main competitive advantages of these new products are safety and maximum comfort. In the first case, we are talking about the absence of a risk of sudden feeding too cold or hot water.
Ease of use is ensured by the fact that the thermostat is capable of correctly adjust the temperature and pressure of the jet.
Sensory
Another "young" generation of high-tech plumbing devices are cranes equipped with a thermostat, pressure compensator, photocells and sensors. Similar models of mixers with long spouts provide contactless control of the instrument features.
The main features of new products can be attributed:
- lack of levers, handles and control valves;
- The ability to actively and while troubleshooting;
- Water supply is carried out with constant temperature and pressure.
The motion sensor is integrated into the housing of most models. It is worth bringing a hand to him, and the water supply begins. It is worth noting that the sensitivity zone of these electronic devices varies in the range from 10 to 30 cm. Some mixers can be equipped with a lever that is responsible for adjusting the temperature. In others, a different control mechanism is provided: to reduce or increase the temperature, it is enough to touch the right or left part of the device body. The market also presents models that allow all parameters in advance.
The designs of various modifications of sensory cranes provide for:
- electronic block;
- valve;
- filter element;
- the connecting hose and directly the vigor itself;
- Lithium battery in cases where the device does not work from the mains:
- Some devices are equipped with a stationary control panel or remote controls that allow you to specify the parameters in advance and at a distance.
Described innovative mixers make it possible to significantly reduce water consumption. It is worth removing the crane, as the flow immediately overlaps.
Also, do not forget about hygienic standards (the crane management is almost completely non-contact). By the way, for this reason, it was originally such models began to operate in medical institutions, catering and public places.
Today, it is confidently growing the number of homeowners who make a choice in their favor.
Materials
Modern plumbing is made from different materials. The most common models of mixers with long poles made of stainless steel are most common.
The main advantages of this material include:
- increased strength and resistance to damage;
- durability;
- availability;
- Aesthetics, allowing products to organically fit into any interior of the bathroom.
Evaluating characteristics Brass and bronze The attention should be paid primarily for a long service life. An equally important feature is the appearance of a material that can emphasize the style of a luxury interior. Such products are not suiced, but the high price is quite justified.
Ceramic Models from products from other materials are characterized by an attractive appearance and most often a non-standard design. Their main disadvantages include fragility, briefness and fairly high cost. In general, with such expensive plumbing, it is necessary to contact as much as possible.
In addition to the materials listed, the manufacture uses Enamel and Chrome To create a decorative and protective coating. Enamel (at the expense of matte invoice) makes invisible traces from the fingers on the surface of the cranes.
Chrome products are characterized by aesthetic, ease of care and durability.
Top best brands
Now in the domestic market shows Germany, Czech Republic, Finland, Denmark, Turkey, and, of course, "Podnebyny". Products of German companies are distinguished by reliability and durability. However, it is difficult to attribute to inexpensive goods. The budget segment is represented by models from China and Turkey, and Finnish and Czech manufacturers offer a kind of "golden middle".
Analyzing the rating of the most popular trademarks in Russia, should first mention Brand Grohe. . At the same time, three important points can be distinguished.
- From the very beginning, GROHE and HANSGROHE were two production facilities in one German family, the head of which was Hans Hran himself. Later, his son launched separate production under the GROHE brand, specializing in the release of fittings and other little things.
- At the moment, Grohe is redeemed by the Japanese (family herself, the GROT owns approximately 12% of the shares). At the same time, HansGrohe remained a purely German brand.
- Products appeared in the Russian Federation earlier and therefore is now better known. The world market develops the opposite situation.
It is important that GROHE supplies more affordable models of sanitary devices. In turn, Hansgrohe does not make the difference between domestic and other markets.
The main characteristics and competitive advantages of product data of brands include:
- High quality products, rigidly controlled at all stages of production;
- strict adherence to all implemented technologies;
- Maximum protection of corrosion materials.
Denmark is represented by products Damixa brands having a recognizable style and characterized by high quality.
The list of main advantages of the manufacturer's company includes:
- active introduction of innovative solutions;
- providing a five-year warranty;
- economy of mixers;
- Study of design of sanitary devices.
One of the most famous Czech manufacturers is LEMARK. . Its products could quickly conquer recognition not only by the Russian market.
Increased demand for Czech faucets of this brand is due to:
- reliability;
- resistant to the effects of rigid water;
- durability;
- aesthetics.
Well known to the consumer Finnish Brand Oras. . This product organically combines modern electronic devices and high-quality materials. All bathing faucets go through bench tests.
Another important advantage can be safely called efficiency, as well as a system of automatic temperature and pressure compensation.
How to choose?
Cranes with extended "hussaks" for decades were and remain inalienable attributes of many bathrooms. As noted above, their installation is the perfect option for small rooms. Also, the mixer with long expulsion will be the optimal solution in situations when there is no ability to connect two devices.
At the initial stage, when choosing a specific model, it should be paid to its type, as well as to the manufacturer. An equally important point will be the features of installation and connection.
The key criteria will be:
- Features of the arrangement of communications;
- length of connecting hoses (you can choose separately);
- Features of mounting and fasteners.
In addition to all already listed, it is strongly recommended to pay attention to the quality of water. Some models are so susceptible to its hardness that their operation is possible only if there are filters. The right choice will allow to significantly reduce operating costs.
An equally important point will be the aesthetics of plumbing. In this case, the determining factor is the interior of the bathroom. Fortunately, modern manufacturers offer more than wide model rows capable of satisfying almost any requests. And the financial side of the issue will be played far from the latter role.
Determining with the choice, it is recommended to take into account the cost of not only the purchase, but also further maintenance of the product.
In the next video you will find instructions for installing a mixer with a long spill for the bath.