Union of loggia with room (80 photos): Methods of joining, design of combined premises. How to combine with a room with removing window opening? Combination projects and finishing options

Combining a room with a balcony allows you to take a fresh look at the possibility of design and perception of space. In this article, we will consider the subtleties of uniting loggia with the room adjacent to it, we will tell how to connect two rooms in one dwelling.

Pros and cons of combination

The loggia is a small extension to the main apartment. Its length is from 3 to 6 m, width - more than 1 m. Combination will allow you to make any room more functional, expand its area. In addition, other advantages are also obvious.

Combined with a loggia room becomes cozy.
When combining the nearby room becomes lighter. The effect of open planning, the atmosphere of lightness and airiness is created.
There is a separate functional corner on the site of the ex-loggia.
Improves the architecture of the room, it becomes more interesting.
Opportunities are opening up in the best interior styles. The features of the architecture allow you to use non-standard furniture.
There are more opportunities to beat the prospects, imparting its disadvantages of the type of advantages.
The combined room becomes more hospitable, in the open space, communication is more comfortable.

Along with the advantages, the alignment of the loggia and the room has several flaws.

Repair will require the creation of a project for which additional money will have to pay.
Independently proceed with repair without negotiation in the relevant instances will not work. Approval gives not every project, because combination can affect the bearing walls.
The volume of repair work increases significantly, as is the cost of buying building materials.
Reconstruction will require more time in comparison with cosmetic repairs.
In some cases, you will have to do the supply of wiring or heating.
Combining does not allow to transfer radiators to the loggia, it will have to warm it in other ways.

Lessoning the project will take some time, you will have to collect a number of documents and wait for the solution.

Project preparation

Design is an important step, the initial stage of repair. With it, it will be possible to choose the option with the most rational use of space. The designer will clearly show how it is better to put the furniture, will offer different ways of architectural solution, of which the customer will be able to choose the most visible option. The project is a schematic drawing of the combined room with the dimensions and arrangement of furnishing elements.

Without preliminary design it is useless to count on approval. Typically projects are specialized companies, turn to the owner of the apartment. Often they themselves are engaged in collecting the necessary documentation, which reduces approval waiting time.

At the first stage, technical documents are collecting, provide a plan of premises before and after redevelopment. Here, each change is indicated, the variant of the demolition of the walls, building materials and finishes fit with their technical characteristics. Also indicated Approximate calculation of heat loss after reconstruction, the type of radiators is noted.

At the second stage, turn to the authors of the project of the erected home. Often, making any changes is not encouraged, because it can reduce the performance characteristics not only a separate apartment, but also the whole house. If the project is approved, getting encouraging fire instance. According to the established regulations It is necessary to withstand the safety standards, in view of which there is no less than 120 cm wide between two premises.

This partition is necessary to ensure that in the event of a fire, it can be hidden.

Methods of accession

The union of the loggia with the room adjacent to it can be different. Completely demolish the bearing walls can not However, if the owner removes the walls, they put the glass doors on them. It is impossible to call this option 100% replacement overlaps. That's why Partial demolition of the wall is considered the most optimal solution.

Ways to join the loggia to the nearby room can be different. For example, the connection may only disassemble the window, windowsill and doors. In this case, a lot of opportunities are created for zoning space. The windows part of the wall becomes, for example, a functional shelf for the placement of living colors.

It can be used under the bar stand, providing a shelf for glasses with a ceiling mount. In addition, it can become a dining table or a table, followed by a computer, you can put statuettes for it, interior accessories. It can also be used under the creation of a rack, which will significantly increase the functionality of the entire combined space.

Sometimes the wall shape is changed to the arched, leaving some of the windows wall . This allows you to create, for example, a column, improvised pedestal to accommodate any object. Sometimes when combined is limited to dismantling the window frame. In its place there are, for example, short length curtains (roller, plize, Roman).

This allows you to create a septum effect, which, if necessary, can be removed, increasing the visually space and degree of its illumination. Reception allows you to make a layout open at the request. Wherein The beam between the doorway and the venue of the former window remains. Can stay glass door.

Less frequently, the subooled part is cleaned completely, and the side walls leave. Such a connection gives more light and visual space. It is especially important for rooms in small-sized type apartments, where every centimeter of the useful area on the account. Someone manages on one of the walls to do holes that use in decorative purposes (for example, without any functionality) or involve them as the shelves for colors, accessories.

Much depends on the type of room to which the loggia is adjacent. For example, if you combine two rooms with the removal of window and doorways, you can make a wide, almost square room rectangular. And it gives more opportunities for the placement of furniture and zoning space. You can connect with the loggia not only the bedroom, but also a children's, kitchen, living room, office.

Warming and decoration

It is embedded after glazing and outdoor decoration. This helps to reduce heat losses. As for the glass packs, then Use better profiles with 5 cameras - They are more reliable and better single-chamber counterparts. Since the radiators to put under the windows of the former loggia can not, They are transferred and engaged in insulation of walls, ceiling and floor.

Do it after the room will be wiring, installed mounting boxes for sockets, switches, remove wires to install lighting devices. So that the room was warm, acquire a high-quality insulation. As a rule, this is an extruded polystyrene foam or a glocked mineral wool. The polystyrene foam is better minvati, it is not afraid of condensate and has a smaller volume.

It is placed in 2 layers with the overlap of the joints of the docks, fixate by the mounting foam or plastic dowels. In addition, foamophole is used as a auxiliary insulation layer, followed by finishing work. Also often use the "warm floor" system, thanks to which it will be warm at any time of year.

When finishing work, they try to use the same materials both in the room itself and in space, where the loggia was previously located. The unity of the facing will allow the room to give a large aesthetic appeal, maintain a single atmosphere. It can be Paired wallpapers, accents in the form of decorative stone, brick veneers, clinker, plaster.

In order for the interior of the connected room is harmonious, the furniture is selected in shape and style, focus on about the same textile texture, choose the right accessories. In addition, pay attention to the choice of lighting devices: they should be similar in shape and style in the main space and location of the former loggia.

Outdoor coatings can be varied in color. This is one of the interior zoning techniques, through which it is possible to achieve an unobtrusive organization. You can combine in the finish of laminate and linoleum, parquet, stone and filler floor, tile and fill.

However, it is necessary to select a combination of facing raw materials correctly, given the style in which the main room is performed.

Interior design design

Options for designing a combined room are recorded at the design stage. Sometimes it is precisely this is the key to a successful project, it allows you to get a really unique result with high aesthetic characteristics and status. Furniture and accessories do not pick out NamAum: If you initially subjugate the idea of arranging a certain interior style, the design will be saturated with space without dimming functionality and modernity.

Combining projects may be different. If the room is big, it allows you to embody in it a classic style. For example, space can be divided into several functional zones, equipping a dining room or a seating area on the site of the ex-loggia. Decorate the interior can beautiful chairs and a table with carved legs, gilded decor.

For modern stylistics, it is important to show the manufacturability and use of new materials. For style minimalism This is simplicity and focus on functionality. Such room must be kept in monophonic color contrasts. The furniture should be laconic, but ergonomic, the symmetry is welcomed, the use of neutral paints palette.

Styles Modern and High Tech Need some kind of kind. Modern is inherent smooth forms, in view of which you can arrange a combined space through an arched wall. The subcast part can also be made curved, make a bar rack or a small functional table from it. In such an interior, you will have to use the latest technique and furnishings from glass.

Loft You can create, arranging furniture in the room islands, choosing a brick and concrete decoration for the walls. The wall can be removed partially or create a column, to separate it with brick masonry. It can be supplemented, for example, for hours in the form of a bronze dial. At the site of the ex-loggia, you can equip the office or mini-library.

Arabic and Eastern Interior You can decorate through the podium on the site of the ex-loggia. You can get it part of frameless furniture. In fact, the mattress is applied to the podium, complement it with decorative pillows of different shapes and textures. You can support the desired atmosphere using bright curtains.

For Vintage directions Stylistics is important to penetrate the spirit of a certain historical era. For example, if this is the style of Provence or Country, it is desirable to choose a rustic, but not devoid of graceful furniture.

In such a combined room, you can bet on textiles, which is a business card of directions. These are light tones, floral or checkered colors, the use of edges, loops and rustic bows.